Search results for: 'ina219 high-side dc current sensor breakout'

This breakout board may well be the last current sensing solution you every need to buy. Not only can it do the work of two multimeters, but it can do it with amazing...

The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications...

This board is a simple carrier of Allegro’s bidirectional ±10A ACS724LLCTR-10AB Hall effect-based linear current sensor, which offers a low-resistance...

This non-invasive current sensor (also known as a “split core current transformer”) can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding to the magnetic field around a current-carrying conductor. By reading the amount of current being produced by the coil, you can calculate how much current is passing through the conductor.

This board is a simple carrier of Allegro’s unidirectional 5A ACS724LLCTR-05AU Hall effect-based linear current sensor, which offers a low-resistance...

This board is a simple carrier of Allegro’s ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 15.5 A and outputs a proportional analog voltage centered at Vcc/2 with a typical error of ±5%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

This board is a simple carrier of Allegro’s ACS71240KEXBLT-030B3 Hall effect-based linear current sensor, which offers a low-resistance (~0.6 mO) current...

The SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing applications. The ACS723 sensor uses...

Monitor DC current, bus voltage, temperature and power over I²C with the INA237's 16-bit ADC, Qwiic connectors, screw terminal and alert output.

This board is a simple carrier of Broadcom’s bidirectional ±10A ACHS-7121 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mO)...

This board is a simple carrier of Allegro’s unidirectional 10A ACS724LLCTR-10AU Hall effect-based linear current sensor, which offers a low-resistance...

This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-100B3 Hall effect-based, electrically isolated current sensor, which offers a...

This is the larger version of a simple carrier for Allegro’s ACS37042KLHBLT-010B3 Hall effect-based, electrically isolated current sensor in a 5-pin...

This board is a simple carrier of Allegro’s ±5A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (185 mV/A) centered at 2.5 V with a typical error of ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

This is the smaller version of a simple carrier for Allegro’s ACS37042KLHBLT-010B3 Hall effect-based, electrically isolated current sensor in a 5-pin...

This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mO)...

This board is a simple carrier of Allegro’s bidirectional ±2.5A ACS724LLCTR-2P5AB Hall effect-based linear current sensor, which offers a low-resistance...

This board is a simple carrier of Allegro’s ±31 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 31 A and outputs a proportional analog voltage centered at Vcc/2 with a typical error of ±4%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

This is the large version of a simple carrier for Allegro’s ACS72981ELRATR-200U3 Hall effect-based, electrically isolated current sensor, which offers a...

This board is a simple carrier of Allegro’s ACS71240KEXBLT-050B3 Hall effect-based linear current sensor, which offers a low-resistance (~0.6 mO) current...

This is the large version of a simple carrier for Allegro’s ACS37030LLZATR-040B3 electrically isolated current sensor that uses two signal paths—Hall...

This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-050B3 Hall effect-based, electrically isolated current sensor, which offers a...

This board is a simple carrier of Broadcom’s bidirectional ±20A ACHS-7122 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mO)...

This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-050U5 Hall effect-based, electrically isolated current sensor, which offers a...

This is the large version of a simple carrier for Allegro’s ACS72981KLRATR-150B5 Hall effect-based, electrically isolated current sensor, which offers a...

This board is a simple carrier of Allegro’s bidirectional ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor, which offers a low-resistance...

This is the large version of a simple carrier for Allegro’s ACS72981ELRATR-200B5 Hall effect-based, electrically isolated current sensor, which offers a...

This is the large version of a simple carrier for Allegro’s ACS37220LEZATR-100B3 Hall effect-based, electrically isolated current sensor, which offers an...

This is the large version of a simple carrier for Allegro’s ACS37220LEZATR-150B3 Hall effect-based, electrically isolated current sensor, which offers an...

This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-050U3 Hall effect-based, electrically isolated current sensor, which offers a...

This is the large version of a simple carrier for Allegro’s CT433-HSWF50DR TMR-based, electrically isolated current sensor that is optimized for high...

This is the large version of a simple carrier for Allegro’s ACS37030LLZATR-065B3 electrically isolated current sensor that uses two signal paths—Hall...

This is the large version of a simple carrier for Allegro’s ACS37220LEZATR-100B5 Hall effect-based, electrically isolated current sensor, which offers an...

This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-050B5 Hall effect-based, electrically isolated current sensor, which offers a...

This is the large version of a simple carrier for Allegro’s ACS72981KLRATR-150U5 Hall effect-based, electrically isolated current sensor, which offers a...

This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes up to 75 A. The ratiometric output voltage is centered at VCC/2 and has a typical error of ±2%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance...

This is the large version of a simple carrier for Allegro’s ACS72981KLRATR-150B3 Hall effect-based, electrically isolated current sensor, which offers a...

This is the large version of a simple carrier for Allegro’s ACS72981ELRATR-200B3 Hall effect-based, electrically isolated current sensor, which offers a...