Search results for: 'header cables'

Jump between male pins and breadboards easily with our 20cm ribbon jumper wires! Available in multiple colors, pre-terminated male to female, and can be unzipped to organize signals. Perfect for prototyping. Get 40 pcs in each pack.

Jumpstart your electronics project with a pack of 40, 20cm female-to-female jumper wires. Pre-terminated with an assortment of colors, these 30 AWG wires are perfect for prototyping and connecting between male pins.

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...

For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...

Easily connect the signals in your projects with our Professional Female to Female Jumper Wires. The rainbow-colored ribbon cable provides color-coding for power, ground, and other signal types, keeping your circuit organized. Each ribbon has 40 wires and is 20cm long. Perfect for off-board connections and fits standard square post headers.

ZipWire™ provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed. The color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow-colored ribbon cable provides the 10 standard electrical colors. Each ZipWire ribbon provides 40 wires, four of each color.

ZipWire™ provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed. The color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow-colored ribbon cable provides the 10 standard electrical colors. Each ZipWire ribbon provides 40 wires, four of each color.

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. Adafruit are carrying these to match...

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...

This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.

These 24" (60 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.

These jumper wires come with a twist! Instead of going from 0.1"/2.54mm pitch headers to breadboard or something like that, these are 2.54mm to 2.0mm! Handy for...

You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one end and a USB A connector on the other.

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with female pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

These 12" (30 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1" crimp...

This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.

These 6" (15 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1"...

These 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1" crimp...

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...

This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This 5-conductor, 30 cm (12") cable has 24 AWG wires and a 5-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...

These 3" (7.5 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...

These 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...

This luxurious accessory will make your Bus Pirate 5 a joy to use. This keyed and locking probe cable made of premium soft and flexible silicone-coated...