Search results for: 'gravity 4-pin cable'
Gravity 4Pin IIC/I2C/UART Sensor Cable (10pcs)
Brand: DFRobot
The Gravity 4Pin IIC/I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 30cm length. One side is PH2.0-4p connector and the other side is XH2.54...
$10.20 AUD, inc GST
Qwiic to Gravity Cable - JST-SH to JST-PH (200mm, 28 AWG)
Brand: SparkFun
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other...
$2.30 AUD, inc GST
Gravity: 4Pin I2C/UART Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont...
$11.32 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
Brand: Adafruit
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...
$1.85 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST
2.5mm Pitch 4-pin Cable Matching Pair - JST XH compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.10 AUD, inc GST
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$3.30 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long
Brand: Adafruit
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$3.25 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
Brand: Adafruit
This 4-wire cable is a little over 300mm / 11.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$2.80 AUD, inc GST
2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible
Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.10 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
Brand: Pololu
This 4-conductor, 12 cm (4.5") cable has 24 AWG wires and a 4-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$3.75 AUD, inc GST
JST PH 4-Pin Socket to Color Coded Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...
$2.10 AUD, inc GST
Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs Pack) (Seeed Studio)
Brand: Seeed Studio
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards...
$2.55 AUD, inc GST
JST PH-Style Cable, 4-Pin, Female-Female, 63cm
Brand: Pololu
This 4-conductor, 63 cm (25") cable has 24 AWG wires and 4-pin female JST PH-type connectors (2mm pitch) on both ends...
$7.10 AUD, inc GST
2.54mm 0.1" Pitch 1x4-pin Jumper Cable - 20cm long
Brand: Adafruit
These jumper cables are exactly what you need to connect common 0.1" header devices together. Sure you can tape together individual 1x1 header ...
$1.70 AUD, inc GST
Study Pack of HUSKYLENS for micro:bit
Brand: DFRobot
The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered...
$90.19 AUD, inc GST
JST SH-Style Cable, 4-Pin, Single-Ended Female, 75cm
Brand: Pololu
This 4-conductor, 75 cm (30") cable has 28 AWG wires and a 4-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...
$5.55 AUD, inc GST
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT 4-pin JST SH on one end, and Arduino MKR...
$2.85 AUD, inc GST
JST PH 4-pin Vertical Connector (10-pack) - STEMMA
Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...
$6.65 AUD, inc GST
JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic
Brand: Adafruit
This cable will make it super easy to use Adafruit's plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector...
$6.15 AUD, inc GST
4-pin JST SM Plug + Receptacle Cable Set
Brand: Adafruit
These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector...
$3.60 AUD, inc GST
Gravity 4Pin Sensor Adapter
Brand: DFRobot
This is Gravity 4Pin sensor adapter which is special designed for 4Pin sensor. We have optimized its connection interface to make it compatible with gravity interface...
$5.22 AUD, inc GST
Similar matches
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long
Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with...
$1.95 AUD, inc GST
Flexible Qwiic Cable - Female Jumper (4-pin)
Brand: SparkFun
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is...
$3.30 AUD, inc GST
1.25mm Pitch 4-pin Cable 20cm long 1:1 Symmetric Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.85 AUD, inc GST
1.25mm Pitch 4-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
Gravity: Digital Sensor Cable for Arduino - 30cm (10 Pack)
Brand: DFRobot
The digital sensor cables are especially designed for the DFRobot popular IO Expansion shield and sensors. It connects most of their digital sensor to the IO board.
This price includes 10 pieces of cables.
$9.49 AUD, inc GST
Snap-In Panel Mount Cable - USB Type A Socket to 4 Wires
Brand: Adafruit
This panel mount cable is great for making USB Host connections with a panel-mount setup. On the rectangular panel-mount side you get a USB Type A...
$5.25 AUD, inc GST
Gravity: CO Sensor (Calibrated) - I2C & UART
Brand: DFRobot
The factory-calibrated carbon monoxide sensor has a variety of signal output methods to meet various communication needs...
$114.49 AUD, inc GST
Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially...
$11.18 AUD, inc GST
JST SH-Style Cable, 4-Pin, Female-Female, 63cm
Brand: Pololu
This 4-conductor, 63 cm (25") cable has 28 AWG wires and 4-pin female JST SH-type connectors on both ends...
$6.75 AUD, inc GST
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514
Brand: DFRobot
This is a MEMS gas concentration sensor from DFRobot, supports the detection of various gas concentrations like CO, C2H5OH (Alcohol), H2, NO2, NH3...
$63.14 AUD, inc GST
Gravity: I2C Non-contact IR Temperature Sensor (MLX90614-DCI)
Brand: DFRobot
We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object...
$111.83 AUD, inc GST
Gravity: NH3 Sensor (Calibrated) - I2C & UART
Brand: DFRobot
The factory-calibrated ammonia sensor has a variety of signal output methods to meet various communication needs...
$233.17 AUD, inc GST
Gravity: CL2 Sensor (Calibrated) - I2C & UART
Brand: DFRobot
The factory-calibrated chlorine sensor has a variety of signal output methods to meet various communication needs...
$233.16 AUD, inc GST
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
Brand: DFRobot
The module combines GNSS positioning and RTC functionality. Provides precise longitude, latitude, and altitude data. Compatible with Arduino, ESP32, and...
$43.79 AUD, inc GST
Gravity: Digital Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially...
$11.18 AUD, inc GST
IDE Molex 4 Pin Socket Cable - 30cm long
Brand: Adafruit
For big projects with big power needs, an AT or ATX power supply is a handy place to grab 5V or 12VDC. The only problem is that these supplies have...
$2.70 AUD, inc GST
Study Pack with HUSKYLENS and micro:bit V2
Brand: DFRobot
The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered...
$194.81 AUD, inc GST
4PIN LED Strip Connector Cable (5Pcs)
Brand: DFRobot
This 4Pin solderless strip connector comes with wire and adopts snap-down design at both ends, which makes a firm and easy connection of 10mm wide 4-wire...
$5.30 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.