Search results for: 'crimp connector kit'

Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...

Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days...

These 2×13-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced...

This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).

These 2×4-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.

These 2×6-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.

These 1×12-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.

These 2×20-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.

These 2×3-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.

Totaling 150 connectors and matching plastic sheaths, this Spade Quick Connector Kit is a must-have for your workstation. You'll have enough connectors to fuel your maker tendencies for days on end! Perfect for making wire harnesses to micro switches, arcade buttons and toggle switches.

These 2×16-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors to your own 14- to 20-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors.

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

This product includes 3-pin 2.0mm mating connector housing(10 units) and crimp pins (30 units).

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 12" (30 cm) wires have gray insulation and ship in packs of 10.

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 12" (30 cm) wires have green insulation and ship in packs of 10.

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).

This product includes 4-pin 2.0mm mating connector housing(10 units) and crimp pins (40 units).

This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

This connector, a smaller version of the female Tamiya connector, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors to your own 16- to 20-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors.

These premium wires are stranded 22AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 3 ft (90 cm) wires have black insulation and ship in packs of 5.

These premium wires are stranded 22AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 3 ft (90 cm) wires have red insulation and ship in packs of 5.

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

This connector, a smaller version of the female Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female mini Tamiya connector has 10 cm 18-AWG leads with stripped and tinned terminations.

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

This pack contains everything you need to add up to three male Futaba J connectors — the connectors that mate with those found on many Futaba servos — to custom cables. You can use a crimping tool to attach the included pins to your own 22–26 AWG wires. This pack contains enough housings and crimp pins (including 3 spare pins) for 3 male connectors. The crimp pins have gold-flashed male contacts.

This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

Quick connector wire sets will make wiring up Adafruit's arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.11" quick-connects pre-crimped...

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...

This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.

This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing.

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male connectors on one end and female connectors on the...

These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1" (2.54 mm) female headers, connectors, and...

These 2×7-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.

These five-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.

These nine-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.

These 2×2-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.