Search results for: 'bolt'

This M2.5 hex nut is made from steel, is zinc-plated, and comes in packs of 25...

This is a replacement power pack for both the Sphero SPARK+ Power Pack and Sphero BOLT Power Pack.

This mounting kit provides you different types of screws and nuts which are most commonly used in DFRobot's projects here at DFRobot. We use them to mount circuit boards and help build robots.

This 6mm Bore Aluminum Clamping Collar has an M4 socket head pinch bolt to provide excellent clamping force on a 6mm round or 6mm D profile.....

This M3 hex nut is made from steel, is zinc-plated, and comes in packs of 25.

This track set includes a pair of 30-tooth silicone tracks, two black drive sprockets measuring 35 mm (1.4") in diameter, and two matching idler sprockets...

Fit a pHAT fiddle-free! These solderless pogo GPIO pins, nuts, bolts, and spacers make fitting a pHAT to your Pi Zero (or Zero W) super-quick and easy. Pogo-a-go-go!

This hub allows you to mount components to a 5mm diameter shaft.

This is an M3 Hex nut for use with M3 screws...

A pack of 10, M3 serrated flange nuts. These nuts can be used to install your circuit boards, sensors, and mechanically mount other parts.

This track set includes a pair of 30-tooth silicone tracks, two red drive sprockets measuring 35 mm (1.4") in diameter, and two matching idler sprockets...

This track set includes a pair of 22-tooth silicone tracks, two black drive sprockets measuring 35 mm (1.4") in diameter, and two matching idler sprockets...

The 6mm D-Bore Double Sonic Hub is compatible with our 6mm D-shafting as well as the 5202 Series Gear Motors. The 16mm width of the hub.....

This Hyper Hub has a threaded bore to match our 8mm lead.....

The 12mm REX Bore Hyper Hub is a heavy duty, balanced, clamping solution to fastening onto a

The 8mm REX™ Bore Polycarbonate Hyper Hub is a budget-friendly solution for driving rotating components on.....

This 8mm REX Bore Sonic Hub has thru-holes on the 16mm goBILDA hub pattern. Thru-hole hubs allow you to fasten to parts that have threaded.....

We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigorous 19-point inspection process at each step of the process. And how each nut’s dimensional variations can only be measured on the sub-atomic level.

These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below.

This track set includes a pair of 30-tooth silicone tracks, two drive sprockets measuring 1.38" (35 mm) in diameter, and two matching idler sprockets along with mounting hardware. The drive sprockets are designed to work with 3mm D-shafts, such as those on Pololu's micro metal gearmotors and 15.5D mm metal gearmotors. We also have a set that includes shorter tracks.

Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maximum torque at 0.16 sec/60°

Where would a Raspberry Pi Case be without VESA support for the Media Centre fanatics? If you need to tuck your Pi safely behind your TV and hide it from your spouse, we cater for multiple options.

The :MOVE Motor Klaw provides a fun and easy to install addition to the Kitronik :MOVE Motor buggy for microbit. It has been carefully designed to have the ability to fit both vertically and horizontally with one bolt. Included are two types of Klaw attachments for each of these builds.

This motor mount is able to fasten to the face of a 5201 Series Gear.....

This Plastic Pattern Spacer has an overall length of 10mm, the same as the thickness of two 1611 Series Flanged Bearings, so that a bearing.....

This 3/8” hex bore Hyper Hub is a beefy solution for fastening a component to a 3/8” hex profile shaft—such as AndyMark Robits Hex Shafts...

This track set includes a pair of 22-tooth silicone tracks, two red drive sprockets measuring 35 mm (1.4") in diameter, and two matching idler sprockets...

This bracket was designed specifically for the Glideforce Medium-Duty (MD) linear actuators. It is machined out of a single piece of aluminum and has been...

This hub allows you to mount components to a 4mm diameter shaft.

This hub allows you to mount components to a 3/8" shaft

Computer Science Foundations (CSF) by Sphero is a dynamic, standards-aligned curriculum designed to be taught in the classroom alongside Sphero robots. Learn computer science and STEAM principles over three courses, with each customised lesson allowing teachers and students to learn and grow together. If you’ve been looking to integrate CS content into your STEAM classroom, look no further

The 12mm REX bore Hyper Hub is a heavy-duty, balanced, clamping solution to fastening onto a 12mm REX shaft. The dual pinch-bolts put a.....

Where would a Raspberry Pi Case be without VESA support for the Media Centre fanatics? If you need to tuck your Pi safely behind your TV and hide it from your spouse, we cater for multiple options.