Search results for: 'adhesive foam'

47 results

Double-Sided Adhesive Foam (23x12mm)

Brand: Core Electronics

Stick sensors and parts of your project down!

$0.55 AUD, inc GST

Thick Double-Sided Rectangle Foam Tape - 2 pieces - 3/4" x 1.5" x 0.063"

Brand: Adafruit
These 1mm thick double-sided foam tapes are perfect for a variety of small projects. These adhesive rectangles provide a strong bond to most surfaces and are cleaner and easier to remove without the wait, mess, or hassle of epoxy or hot glue
$1.50 AUD, inc GST
Similar matches

Copper Tape - Conductive Adhesive, 5mm (50ft)

Brand: SparkFun
Adhesive Copper tape is a staple of any modern, STEM classroom. This roll of copper tape has conductive adhesive on one side, separated by a paper backing to the rest of the roll meaning you can cut it down, break it up and use it just as your classroom requires. It's one of the best DIY tools you can have at your disposal.
$11.50 AUD, inc GST

PVC Tape

Brand: Core Electronics

Insulating tape that also happens to work very well with IR Line sensors.

$2.50 AUD, inc GST

Copper Foil Sheet with Conductive Adhesive - 12 x12 Sheet

Brand: Adafruit
Copper sheet can be an interesting addition to your toolbox
$14.70 AUD, inc GST

Heatshrink Pack - Glue Lined

Brand: Core Electronics
Boost connection strength with glue-lined heat-shrink! Grips insulation & surfaces for superior bonding. Ideal for high-vibration areas. 95 pieces in diverse sizes & colors.
$20.95 AUD, inc GST

Little Rubber Bumper Feet - Pack of 4

Brand: Adafruit
Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are Adafruit's favorite accessory for any electronic kit or device...
$1.90 AUD, inc GST

High Temperature Adhesive Tape - (1cm, 33m)

Brand: SparkFun
This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator, like electrical tape, but it can withstand temperatures as high as 258°C (496°F). It also provides good resistance to corrosion and the silicone adhesive holds tight throughout the tape’s rated temperature range. This is a good choice for insulating components inside of an enclosure that might be subjected to extreme conditions.
$10.60 AUD, inc GST

Copper Foil Tape with Conductive Adhesive - 6mm x 15 meter roll

Brand: Adafruit
Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so its extremely flexible and can take on nearly any shape...
$14.15 AUD, inc GST

10mm x 5m Hook and Loop Tape

Brand: Core Electronics

Secure wires, sensors or modules in style, and reusable!

$7.15 AUD, inc GST

Disposable ECG Electrodes Pack (12 pcs)

Brand: DFRobot

The Disposable ECG electrode is used for ECG or other biopotential measurements. It is composed of 12 adhesive electrodes, using nonwoven fabric material - a kind...

$6.76 AUD, inc GST

Copper Foil Tape wth Conductive Adhesive - 25mm x 15 meter roll

Brand: Adafruit
Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so its extremely flexible and can take on nearly any shape...
$47.85 AUD, inc GST

Nylon Fabric Squares with Conductive Adhesive - 10cm x 10cm - 3 pack

Brand: Adafruit
These Conductive Nylon Squares go great with Adafruit's other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. Adafruit found that the metallic nylon fabric has some great improvements over plain copper tape.
$8.15 AUD, inc GST

Muscle Sensor Surface EMG Electrodes - H124SG Covidien - Pack of 6

Brand: Adafruit
Have your next project be controlled by your muscles with this pack of Muscle Sensor Surface EMG Electrodes! Pair the electrodes with the MyoWare Muscle Sensor and...
$11.70 AUD, inc GST

Copper Tape - Conductive Adhesive, 2" (50ft)

Brand: SparkFun
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps.
$59.95 AUD, inc GST

MG Chemicals Slow Cure Thermally Conductive Adhesive, Flowable, 25ml

Brand: MG Chemicals
8329TFS is a thermally conductive two-part epoxy adhesive with a long working life. It is dark grey, smooth, thixotropic, and bonds well to a wide variety of substances.
$69.75 AUD, inc GST

Thermal Tape 4"x4" Square

Brand: SparkFun
Thermally Conductive Adhesive Transfer Tapes are designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other...
$2.05 AUD, inc GST

Strong Transparent Double Sided Tape (20mm x 50m)

Brand: Makera

Secure workpieces during milling with this Strong Fixation Tape. This transparent, double-sided adhesive provides a robust, low-profile bond.

$14.30 AUD, inc GST

Conductive Nylon Fabric Tape - 8mm Wide x 10 meters long

Brand: Adafruit
With Adafruit's fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This Conductive Nylon tape goes great with Adafruit's other interesting...
$8.95 AUD, inc GST

Copper Foil Tape with Conductive Adhesive - 6mm x 5 meters long

Brand: Adafruit
Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so it's extremely flexible and can take on nearly any shape...
$9.95 AUD, inc GST

Copper Tape - Non-Conductive Adhesive 5mm (50ft)

Brand: SparkFun
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps.
$10.95 AUD, inc GST

Conductive Nylon Fabric Tape - 5mm Wide x 10 meters long

Brand: Adafruit
With Adafruit's fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This Conductive Nylon tape goes great with Adafruit's other interesting...
$6.30 AUD, inc GST

Silicone Bumpers - Large (10x16.5mm, 4 pack)

Brand: SparkFun
Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They can also be used as feet for enclosures. These are self-adhesive and 16.5mm in diameter and about 10mm tall. They taper to roughly 12mm at the top. They come in a set of 4.
$2.30 AUD, inc GST

Steinel Glue Sticks Acrylate 11mm Pk 20

Brand: Core Electronics
Special-purpose acrylate adhesive for high aging and heat resistance, solvent-free. Only use with 4.5 mm long nozzle
$74.85 AUD, inc GST

Ultimaker Adhesion Sheets (25 Sheets)

Brand: Ultimaker
Using an adhesion sheet is one of the most effective methods of ensuring your 3D print adheres to the build plate, producing consistent high-quality results on your Ultimaker 2+ and 3. Learn how to apply it correctly, prevent air bubbles, and ensure a smoother, flatter surface.
$46.39 AUD, inc GST

Steinel Glue Sticks Ultra 11mm Pk 20

Brand: Core Electronics

Ultra Power Universal, Particularly Strong Hot-Melt Adhesive. For Bonding a Variety of Materials

$34.50 AUD, inc GST

Steinel Glue Sticks Universal 11mm Pk 20

Brand: Core Electronics
Steinel's universal bond of bonds a fixed range of materials, such as wood, paper, card, fabrics, glass, ceramics, metal & many plastics, such as ABS, melamine, PA, PC, PE, PET, PMMA, POM, PP, PVC & rigid PVC. The solvent-free adhesive can be applied at a temperature of 190 ° C and is firm after a maximum of 15 seconds, providing a strong bond after about 60 - 90 seconds
$74.75 AUD, inc GST

Magigoo Glide Kit

Brand: Magigoo
Effortless, Fast, and Economical Adhesive Application First layer build-plate adhesives are required to mitigate the warping effect in the FDM printing...
$209.95 AUD, inc GST

Clear Adhesive Squares - 6 pack - UGlu Dashes

Brand: Adafruit
UGlu Dashes are perfect for a variety of small projects. These adhesive squares provide a stronger bond to most surfaces and are cleaner and easier to remove without the wait, mess, or hassle.
$1.90 AUD, inc GST

Breadboard - Translucent Self-Adhesive (Clear)

Brand: SparkFun
Ever wonder what goes on inside these things? Well this clear bread board might enlighten.
$12.85 AUD, inc GST

Steinel Glue Sticks Ultra 11mm Pk 40

Brand: Core Electronics
ULTRA Power glue sticks, for glueing a variety of materials, particularly strong all-purpose adhesive.
$72.85 AUD, inc GST

Maker Paste Lead-Free Prototyping Solder Paste

Brand: Adafruit
Does your prototyping project require soldering? Are you looking for something other than your usual run-o'-the-mill solder wire? Look no further! This high quality...
$19.60 AUD, inc GST

Bostik BLU Glue Stick 35g (alternative to Elmers Disappearing Purple)

Brand: Core Electronics
If you're looking to partake in some large 3D Prints, whatever your print surface might be, a good quality Glue stick can be the defining difference between failed and fantastic prints!
$6.25 AUD, inc GST

Bambu Lab Liquid Glue for Build Plate

Brand: Bambu Lab

Designed to assist with print adhesion during printing, release once complete and protect build surfaces, this liquid adhesive creates a consistent interface layer for engineering materials like PETG and ABS.

$32.50 AUD, inc GST

Ultimaker S5 Adhesion Sheets

Brand: Ultimaker
Using an adhesion sheet is one of the most effective methods of ensuring your 3D print adheres to the build plate, producing consistent high-quality results
$67.43 AUD, inc GST

Conductive Material Pack

Brand: DFRobot
Start your creative DIY project with this high-quality wire pack! The pack contains several kinds of conductive materials that basically meet your common needs of...
$39.56 AUD, inc GST

Silver Pin Back with Foam Adhesive

Brand: Adafruit
This little Silver-color Pin with Foam Adhesive is the perfect way to attach any PCB or small component to cloth material. The adhesive forms a solid but not permanent...
$1.55 AUD, inc GST

Steinel Glue Sticks Low Melt 11mm Pk 20

Brand: Core Electronics
Its low melting temperature makes the Low-Melt adhesive particularly suitable for heat-sensitive materials, such as PU foam and polystyrene.
$65.10 AUD, inc GST

Steinel Glue Sticks Fast 11mm Pk 20

Brand: Core Electronics
Steinel's universal bond of bonds a fixed range of materials, such as wood, paper, card, fabrics, glass, ceramics, metal & many plastics, such as ABS, melamine, PA, PC, PE, PET, PMMA, POM, PP, PVC & rigid PVC. The solvent-free adhesive can be applied at a temperature of 190 ° C and is firm after a maximum of 15 seconds, providing a strong bond after about 60 - 90 seconds
$74.85 AUD, inc GST

EVA Foam Pack in Rainbow Colors - 2mm thick - 10 sheets

Brand: Adafruit
EVA foam is one of the best and easiest go-to materials for constructing costumes and props. It's light, inexpensive, versatile, and can easily be cut and heat-shaped...
$24.10 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.