Search results for: 'Angle Bracket A'

These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such.

This steel 90° bracket is a sturdy solution for right angles in your project! The two primary thru-holes (located at 90° to one.....

A 1-1 1111 Series Angle Pattern Bracket

A 4-1 1111 Series Angle Pattern Bracket

This steel 90° bracket is a sturdy solution for right angles in your project. Its 16mm goBILDA pattern thru-holes not only surround.....

A 2-1 1111 Series Angle Pattern Bracket

This steel angle pattern mount is an excellent solution for robust 90° joints as well as miter gear assemblies. And thanks to the.....

A 3-1 1111 Series Angle Pattern Bracket

Lightweight corner brackets with M3 bolt friendly mounting holes, useful for connecting two panels of wood or acrylic together at right angles. We use...

These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it. These brackets, which allow for a tall and slender perpendicular sensor orientation, are sold in pairs, and four M3 screws and nuts are included for securing sensors to the brackets.

Top-up your Makedo with this bulk pack of SCRU+.

These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it. These brackets, which allow for a low-profile parallel sensor orientation, are sold in pairs, and four M3 screws and nuts are included for securing sensors to the brackets.

The Tamiya 70098 Universal Plate Set provides a reconfigurable platform for building your own robot chassis. The set comes with a plate with gridded mounting holes, angle brackets, and mounting hardware that lets you mount mechanical components in a variety of positions.

The Tamiya 70157 Universal Plate Set (2pcs.) provides a reconfigurable platform for building your own robot chassis. The set comes with two plates with gridded mounting holes, angle brackets, and mounting pins that let you mount mechanical components in a variety of positions.

HuskyLens is an easy-to-use AI machine vision sensor. It is equipped with multiple functions, such as face recognition, object tracking, object recognition, line...

This flat pattern bracket allows you to create a 135 degree angle between two plates or pieces of channel. The five holes at each end are.....

Support a 90 degree joint between two plates, channels or brackets with this gusseted angle mount. Threaded holes on every side ensure it.....

The 15.6-inch 4K OLED touch display is ideal for graphic design, photo editing, and gaming. Equipped with HDMI and Type-C dual output interfaces, and...

This flat pattern bracket works well for creating a 135 degree angle between two structural pieces. The 40mm width allows the bracket to.....

Pimironi's Pan-Tilt HAT lets you mount and control one of their pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs.

This Threaded Steel L-Bracket can be used as a robust 90° connector or as reinforcement to an existing junction. Both sides have three.....

This Threaded Steel L-Bracket can be used as a robust 90° connector, as well as to create a linear junction between lengths of U-Channel......

This wall mounting bracket can be used to mount The Pi Hut's Raspberry Pi camera cases to a wall or bench!

A 45 Tooth 2312 Series Hub-Mount Gear (MOD 0.8)

DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque power, improved stability and durability.

This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).

This NEMA 17-size hybrid bipolar stepping motor has an integrated 18 cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).

This version of the FS5106B standard servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green)...

This NEMA 17-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm (44 oz-in).

A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper (ePaper/eInk/EPD) display for Raspberry Pi...

This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in).

This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 7.4 V, allowing for a holding torque of 9 kg-cm (125 oz-in).

This NEMA 23-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 2.5 V, allowing for a holding torque of 13 kg-cm (180 oz-in).

This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 500 mA at 10 V, allowing for a holding torque of 1 kg-cm (14 oz-in).

This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 8.6 V, allowing for a holding torque of 14 kg-cm (190 oz-in).

This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 2.7 V, allowing for a holding torque of 1.4 kg-cm (20 oz-in).

Maqueen Plus V3, advanced educational robot with precision navigation by matrix laser ranging. For STEM EDU, robotics competitions of primary and...

This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in).

This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 2.2 kg-cm (30 oz-in), and each phase draws 1 A at 5.9 V. This stepper motor’s flat profile (21 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.