Search results for: &#039;9v battery lead&#039;

Standard 9V Battery Clip with leads.

$0.46 AUD, inc GST

9V Snap Connector

Brand: DFRobot

Classic 9V connector with 15cm unterminated cable.

$0.65 AUD, inc GST

This easy-to-use 16850 battery holder with dual-slot offers micro and type-C charging inputs, five 5V/2A output ports, five 3.3V/1A output ports and one...

Similar matches

2-Way 18650 Battery Holder

$20.80 AUD, inc GST

3-pin LiPo Battery 1000mAh

1000mAh Lithium-Ion battery with an inboard NTC.

$8.50 AUD, inc GST

3-pin LiPo Battery 500mAh

500mAh Lithium-Ion battery with an inboard NTC.

$6.70 AUD, inc GST

9V Battery

Duracell Coppertop 9V Batteries are perfect for stocking up and keeping your devices running. Ideal for use in projects powered by a 9V Battery Clip.

Please note you'll receive either A Duracell Coppertop or Duracell Industrial battery which have the same product specifications.

$6.35 AUD, inc GST

18650 Battery Holder (Surface Mount Tabs)

Cradle your 18650 batteries with these ABS holders

$1.85 AUD, inc GST

4 x AA Battery Holder with Premium Jumper Header Wires

Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...

$7.50 AUD, inc GST

3-pin LiPo Battery 6000mAh

6000mAh Lithium-Ion battery with an inboard NTC.

$37.30 AUD, inc GST

A nice portable power pack can help you a lot when you build up you projects. Come and make one with this 3×AAA battery holder. This is a 3xAAA Battery Holder. It...

3xAAA Battery Holder

Brand: DFRobot

$2.40 AUD, inc GST

Battery Connector Cable (5 pcs)

Brand: RAKwireless

A pre-crimped connector perfect for RAKWireless boards (and others) with the same wiring polarity.

$3.35 AUD, inc GST

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...

$5.40 AUD, inc GST

Battery Holder - 18650 (PTH)

This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you’ll need two for each battery. These work great for larger, high capacity applications where a drop-in rechargable cell is needed. These little guys are low cost and easy to use!

$1.65 AUD, inc GST

Battery Holder - 2xAA (JST-PH)

This is a two-cell AA battery holder with 6" (~150mm) cable that has been terminated with a JST-PH connector.

$3.10 AUD, inc GST

8-AA Battery Holder, Back-to-Back

Battery holder for eight AA cells arranged as two back-to-back four-cell holders.

$7.60 AUD, inc GST

2 x AA Battery Holder with Premium Jumper Header Wires

Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...

$4.15 AUD, inc GST

This 6V battery contains five 3000mAh sub-C cells wired in series. The high strand silicone wire has a built-in mini-blade fuse holder...

NiMH Battery (6V, 3000mAh, XT30 Connector [MH-FC], 20A Fuse, 6-3)

Brand: goBilda

$50.30 AUD, inc GST

This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...

4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)

Brand: DFRobot

$3.90 AUD, inc GST

A 3xAA Battery Holder with a built-in lead that terminates in a 2.1mm DC jack, the lead and jack combined is approx. 150mm in length...

3 x AA Battery Cage with Lead and 2.1mm DC jack

Brand: Kitronik

$4.90 AUD, inc GST

6-AA Battery Holder, Enclosed with Switch

Enclosed battery holder for six AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also...

$14.20 AUD, inc GST

9V Step-Up Voltage Regulator U3V40F9

This compact (0.6"×0.6") switching step-up (or boost) voltage regulator efficiently generates 9 V from input voltages as low as 1.3 V and handles...

$16.50 AUD, inc GST

Tamiya Plug with 10cm Leads, Female

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.

$6.60 AUD, inc GST

2 x AA Battery Holder with On/Off Switch & JST PH Connector

This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...

$5.50 AUD, inc GST

2 x AAA Battery Holder with On/Off Switch & JST PH Connector

This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is nicely slim, and 2 AAA's...

$4.65 AUD, inc GST

2-C Battery Holder

Battery holder for two C cells.

$8.70 AUD, inc GST

Rechargeable NiMH Battery Pack: 3.6 V, 900 mAh, 3x1 AAA Cells, JR Connector

This is a rechargeable 3.6 V NiMH battery pack with a capacity of 900 mAh. The pack consists of three AAA cells in a single row and a 4" lead terminated by a “JR”-style connector.

$20.50 AUD, inc GST

Battery Holder 2xAA with Cover and Switch - JST-XH Connector

This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.

$3.80 AUD, inc GST

9V Step-Up Voltage Regulator U3V70F9

This powerful synchronous switching boost regulator efficiently generates an output voltage of 9 V from an input voltage as low as 2.9 V while using an...

$38.45 AUD, inc GST

2 x AA Open Battery Holder with JST PH Connector

This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...

$4.05 AUD, inc GST

Tamiya Plug with 10cm Leads, Male

This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.

$6.60 AUD, inc GST

Battery Holder 3xAA with Cover and Switch - JST Connector

This 3xAA battery holder with JST connector puts a nice finishing touch on your battery powered project...

$5.10 AUD, inc GST

Out of stock