Search results for: '9v battery holder with switch'

39 results

9V battery holder with switch & 5.5mm/2.1mm plug

Brand: Adafruit
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic...
$8.75 AUD, inc GST

Single CR2032 / 20mm Coin Cell Battery Holder with Switch

Brand: Adafruit
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (also known as CR2032) in series to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes, so they are easy to get and fairly low cost. They tend to have about 220mAh capacity.
$2.10 AUD, inc GST

3x AAA Battery Holder with Switch - Tiny FX Compatible

Brand: Pimoroni
Power your Tiny FX projects with this 3x AAA battery holder featuring a built-in power switch, JST-SUR connector, and 3.3-4.5V output range for reliable portable power.
$6.30 AUD, inc GST

4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)

Brand: DFRobot
This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...
$3.83 AUD, inc GST

3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip

Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$7.60 AUD, inc GST

Waterproof 2xAA Battery Holder with On/Off Switch

Brand: Adafruit
Keep your power source safe and toasty in these waterproof 2xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...
$9.40 AUD, inc GST

2 x AA Battery Holder with On/Off Switch & JST PH Connector

Brand: Adafruit
This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...
$5.50 AUD, inc GST

4 x AA Battery Holder with On/Off Switch

Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST

3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip

Brand: Adafruit
This battery holder connects 3 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is compact, and 3 AA's add...
$8.50 AUD, inc GST

3x AA Battery Holder with On/Off Switch and 2-Pin JST

Brand: Adafruit
Here's another addition to the growing family of AA battery holders. Behold! A holder for three (3) AA batteries! It's got a 6" long genuine JST-PH 2-pin cable connector, an On/Off switch, and, oh yes, it's in classy Adafruit black.
$7.95 AUD, inc GST

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH

Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$5.40 AUD, inc GST

Waterproof 3xAA Battery Holder with On/Off Switch

Brand: Adafruit
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...
$11.40 AUD, inc GST

2 x AAA Battery Holder with On/Off Switch & JST PH Connector

Brand: Adafruit
This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is nicely slim, and 2 AAA's...
$4.65 AUD, inc GST

LilyPad Coin Cell Battery Holder - Switched - 20mm

Brand: SparkFun
Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further.
$4.15 AUD, inc GST

5 x AA Battery Holder with 2.1mm DC Jack

Brand: Adafruit
Here's yet another addition to Adafruit's family of AA battery holders. It's a holder for five (5) AA batteries, with 5" wire leads. It's black and has a 2.1mm barrel plug...
$8.95 AUD, inc GST

2xAAA Battery Holder with JST-PH Connector

Brand: Kitronik
2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.
$1.90 AUD, inc GST

3 x AA Battery Holder with 2.1mm Plug

Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for three (3) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.70 AUD, inc GST

4 x AA Battery Holder with Premium Jumper Header Wires

Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$7.50 AUD, inc GST

6 x AA battery holder with 5.5mm/2.1mm plug

Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supply. Either one...
$7.75 AUD, inc GST

8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch

Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one...
$16.90 AUD, inc GST

Single CR2032 Battery Holder with Three Flashing Modes

Brand: Adafruit
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (CR2032 is the most popular size) to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes and other small topys, so they are easy to get and fairly low cost. And speaking of lights, these battery holder includes three "LED" modes: quick flashing, slower flickering, and static on. Press the button to cycle through the modes. Although designed for LED jewelry, it could be used for other projects that need simple cycling.
$3.05 AUD, inc GST

2 x AA Open Battery Holder with JST PH Connector

Brand: Adafruit
This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...
$4.05 AUD, inc GST

2 x AA Battery Holder with Premium Jumper Header Wires

Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$4.15 AUD, inc GST

4 x AA Battery Holder with 2.1mm Plug

Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for four (4) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.90 AUD, inc GST

4 x AA Battery Holder with 2.1mm Plug and On/Off Switch

Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. Behold! A holder for four (4) AA batteries! It's got a 5" long power cable with a 5.5/2.1mm...
$10.40 AUD, inc GST

6xAA Battery Holder with DC2.1 Power Jack

Brand: DFRobot
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.
$4.39 AUD, inc GST

3 x 18650 Battery Holder with DC2.1 Power Jack

Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$4.40 AUD, inc GST

2 x 18650 Battery Holder with DC2.1 Power Jack

Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$3.40 AUD, inc GST

6-AA Battery Holder, Enclosed with Switch

Brand: Pololu
Enclosed battery holder for six AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also...
$14.20 AUD, inc GST

3-AA Battery Holder, Enclosed with Switch

Brand: Pololu
Enclosed battery holder for three AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$9.60 AUD, inc GST

4-AA Battery Holder, Enclosed with Switch

Brand: Pololu
Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$12.70 AUD, inc GST

3-AAA Battery Holder, Enclosed with Switch

Brand: Pololu
Enclosed battery holder for three AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$8.70 AUD, inc GST

9V Battery Holder

Brand: SparkFun
This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don’t want the battery just hanging. It also has three mounting holes so you can attach it securely to your enclosure.
$7.35 AUD, inc GST

Battery Holder 3xAA with Cover and Switch - JST Connector

Brand: SparkFun
This 3xAA battery holder with JST connector puts a nice finishing touch on your battery powered project...
$5.10 AUD, inc GST

Battery Holder 3xAA with Cover and Switch

Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.90 AUD, inc GST

Battery Holder 4xAA with Cover and Switch

Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.40 AUD, inc GST

Battery Holder 2xAA with Cover and Switch - JST-XH Connector

Brand: SparkFun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.80 AUD, inc GST

Battery Holder 2xAA with Cover and Switch

Brand: SparkFun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.85 AUD, inc GST

4xAA battery holder (square with cover)

Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration. This holder features a sliding, removable cover as well as an ON/OFF switch which can be used to control power to your project.
$2.49 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.