Search results for: &#039;20 pin header&#039;

Perfect for prototyping, these straight female headers are a super common header type so grab a few and put your ideas to the test!

$0.41 AUD, inc GST

If you've got exactly twenty positions for pins on the edge of your board you want some female headers on to interface with, these headers have you covered.

$0.74 AUD, inc GST

Short Plug Headers for Raspberry Pi Pico - 2 x 20 Male Headers

These three Short Plug / Male Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!These 2.54mm /...

$1.85 AUD, inc GST

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to...

Raspberry Pi GPIO Tall Header - 2x20

Brand: SparkFun

$5.95 AUD, inc GST

0.100" 2x20-pin Strip Right Angle Female Header

This 2x20-pin strip, right-angle female header is a perfect companion piece to Adafruit's 2x20-pin Dual Male Header. It's a great way to add right-angle capability to a 2x20 pin circuit board either by attaching the right-angle male headers to the board and having a right-angle female header or connecting the female header to Adafruit's 2x20 Dual Male headers.

$3.60 AUD, inc GST

20-pin 0.1 Female Header - Red - 5 pack

Female header is like the duct tape of electronics. It's great for connecting things together, soldering to perf-boards, sockets for wires or break-away header...

$5.15 AUD, inc GST

20-pin 0.1 Female Header - Blue - 5 pack

Female header is like the duct tape of electronics. It's great for connecting things together, soldering to perf-boards, sockets for wires or break-away header...

$5.20 AUD, inc GST

Male Pin Header 2.54mm (1x40)

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

$0.45 AUD, inc GST

2.54mm 1x40-Pin Right Male Header

A classic 0.1" | 2.54mm pitch 40-pin header row, with right-angle mounting for the edge of your board.

$0.41 AUD, inc GST

Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in the Olimex development boards. They mate very well with break away male headers.

40 Pin - Female Headers

Brand: SparkFun

$3.35 AUD, inc GST

10 Pcs 40 Pin Headers - Straight

This is 40 Pin 2.54 mm Single Row Pin Header Strip. It is great for our FIO and custom PCBs or general custom headers.

$4.59 AUD, inc GST

40-Pin 2.54mm Round Female Pin Header

Great for low-profile designs or prototyping with DIP IC's.

$0.54 AUD, inc GST

2.54mm 1x40-Pin Right Female Header

This long row of headers has you covered when you have an "unconventional" free 40-pins on the edge of your PCB to interface or prototype with.

$1.05 AUD, inc GST

40 Pin Break Away Male Header- Right Angle-10 Pcs

A row of right angle headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

$4.59 AUD, inc GST

Male Pin Header 2.54mm (2x40)

Need a customisable connector for random projects?

$0.85 AUD, inc GST

40 Pin Break Away Male Header- Long Straight-10 Pcs

These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs.

$4.91 AUD, inc GST

Edge Carrier

Brand: Unexpected Maker

Prototype with the Unexpected Maker Edge M.2 development boards!

$25.50 AUD, inc GST

This adapter board allows you to use our range of Raspberry Pi boards with the Arduino Uno, Genuino UNO and other Arduino boards which use the same pin layout as the Uno design.

Arduino Uno to Raspberry Pi Adapter

Brand: AB Electronics

$9.50 AUD, inc GST

10 Pcs 40 Pin Headers - Straight (Red)

This is a red colored 40 Pin 2.54 mm Single Row Pin Header Strip from DFRobot.These 0.1" header strips are commonly used as low-cost Arduino connectors.

$5.25 AUD, inc GST

10 Pcs 40 Pin Headers - Straight (Blue)

This is a blue colored 40 Pin 2.54 mm Single Row Pin Header Strip from DFRobot.These 0.1" header strips are commonly used as low-cost Arduino connectors.

$5.28 AUD, inc GST

Adafruit FPC Stick - 20 Pin 0.5mm/1.0mm Pitch Adapter

Connect to 0.5mm, 1.0mm and even some 2.0mm pitch connectors that you may run across with an FPC stick. Adafruit designed this for use in house, to quickly connect to...

$3.70 AUD, inc GST

2.54mm 0.1" Pitch 20-pin Jumper Cable - 20cm long

These jumper cables are exactly what you need to connect common 0.1" header devices together. Sure you can tape together individual 1x1 header ...

$5.10 AUD, inc GST

Out of stock

Similar matches

Male Pin Header 2.54mm (2x20)

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

$1.50 AUD, inc GST

JST PH 2-Pin Cable – Male Header 200mm

For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...

$1.60 AUD, inc GST

Raspberry Pi Extra-Long Stacking Header (2x20 pins)

Need another HAT on top of the stack? Grab one of these stacking headers!

$1.95 AUD, inc GST

Electronics Prototyping Kit

Solderless prototyping kit with a breadboard 3.3V/5V power module, 830-point breadboard, jumpers and common IC's for rapid bench testing and classroom labs - just BYO development board!

$29.05 AUD, inc GST

2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets

Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug...

$3.90 AUD, inc GST

2.54mm 1x8-Pin Straight Female Header

This is a 1 × 8 set of 2.54mm | 0.1" separated female headers perfect for small microcontroller breakouts and similar boards to allow easy access to a row of pins

$0.22 AUD, inc GST

2.54mm 1x4-Pin Straight Female Header

Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.

$0.16 AUD, inc GST

Short Socket Headers for Raspberry Pi Pico - 2 x 20 pin Female

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!These headers are particularly cute and...

$2.40 AUD, inc GST

40-Pin 2.54mm Round Male Pin Header

Great for low-profile designs or prototyping with DIP IC's.

$1.40 AUD, inc GST

2.54mm 1x6-Pin Right Female Header

For six pins you need to interface to at a right angle, these headers would be an easy option.

$0.26 AUD, inc GST

This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current, these features make this product a great general-purpose motor driver.

VNH5019 Motor Driver Breakout

Brand: Pololu

$49.30 AUD, inc GST

2.54mm 1x6-Pin Straight Female Header

Do you have a headerless breakout module, custom PCB, or other 2.54mm-pitch connection you need a reliable set of headers for? If so, then these are the kind of headers you're after.

$0.16 AUD, inc GST

2.54mm 1x3-Pin Straight Female Header

Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.

$0.11 AUD, inc GST

2.54mm 1x10-Pin Straight Female Header

Got a breakout board, microcontroller, or PCB of your choice you need to breakout ten pins from? If so, here's the run-of-the-mill header solution you're looking for.

$0.27 AUD, inc GST