Search results for: '2 pin cable'
1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.50 AUD, inc GST
JST-PH 2-pin Jumper Cable - 100mm long
Brand: Adafruit
This hand little 2 pin JST PH connector is perfect for all Adafruit's battery packs!
$1.90 AUD, inc GST
JST SH-Style Cable, 2-Pin, Single-Ended Female, 30cm
Brand: Pololu
This 2-conductor, 30 cm (12") cable has 28 AWG wires and a 2-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...
$1.70 AUD, inc GST
JST 2-pin cable
Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...
$1.30 AUD, inc GST
Molex Pico Blade 2-pin Cable - 200mm
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, the ultra-slim "PicoBlade" is a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection...
$1.95 AUD, inc GST
JST SH-Style Cable, 2-Pin, Female-Female, 10cm
Brand: Pololu
This 2-conductor, 10 cm (4") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...
$2.20 AUD, inc GST
JST SH-Style Cable, 2-Pin, Female-Female, 25cm
Brand: Pololu
This 2-conductor, 25 cm (10") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...
$2.60 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 2-Pin, 12cm
Brand: Pololu
This 2-conductor, 12 cm (4.5") cable has 24 AWG wires and a 2-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$2.40 AUD, inc GST
1.25mm Pitch 2-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
JST PH-Style Cable, 2-Pin, Female-Female, 25cm
Brand: Pololu
This 2-conductor, 25 cm (10") cable has 24 AWG wires and 2-pin female JST PH-type connectors (2mm pitch) on both ends...
$2.80 AUD, inc GST
2-pin JST SM Plug + Receptacle Cable Set
Brand: Adafruit
These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type...
$1.60 AUD, inc GST
TinyFX 2-Pin Connection Cables (15cm, 6-Pack)
Brand: Pimoroni
Connect TinyFX devices easily with these 2-pin JST-SUR cables, perfect for linking expansion boards and mono LED strips in 15cm lengths - includes 6 black cables per pack.
$8.40 AUD, inc GST
JST PH 2-Pin Cable – Male Header 200mm
Brand: Adafruit
For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...
$1.60 AUD, inc GST
2.5mm Pitch 2-pin Cable Matching Pair - JST XH compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.95 AUD, inc GST
2-Pin Female JST PH-Style Cable (14cm)
Brand: Pololu
This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.20 AUD, inc GST
JST 2-pin Extension Cable with On/Off Switch - JST PH2
Brand: Adafruit
By popular request - Adafruit now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable...
$6.35 AUD, inc GST
TinyFX 2-Pin Connection Cables (5cm, 6-Pack)
Brand: Pimoroni
Connect your TinyFX expansion boards and mono LED strips with these reliable 2-pin JST-SUR cables, available in 5cm and 15cm lengths for flexible installation options.
$8.35 AUD, inc GST
2-Pin Female JST XH-Style Cable (15cm)
Brand: Pololu
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.30 AUD, inc GST
2.54mm 0.1" Pitch 2-pin Jumper Cable - 20cm long
Brand: Adafruit
These jumper cables are exactly what you need to connect common 0.1" header devices together. Sure you can tape together individual 1x1 header jumpers, but why not do it right? Use with perf-board, breadboards, breakouts, and more. You'll have a solid cable for quickly connecting any 2.54mm / 0.1" boards.
$1.55 AUD, inc GST
1.25mm Pitch 3-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.95 AUD, inc GST
Mini-DIN Connector Cable for iRobot Create 2 - 7 Pins - 6 feet
Brand: Adafruit
With this handy 7 Pin Mini-DIN Connector you can now jack into the hackport on your iRobot and control it with an Arduino or some other favorite microcontroller...
$18.95 AUD, inc GST
1.25mm Pitch 5-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.50 AUD, inc GST
JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Back-Entry (2-Pack)
Brand: Pololu
Add connectors to your micro metal gearmotors with these boards that feature back-entry, 2-pin male JST SH-type connectors. These boards are compatible...
$3.30 AUD, inc GST
JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Side-Entry (2-Pack)
Brand: Pololu
Add connectors to your micro metal gearmotors with these boards that feature side-entry, 2-pin male JST SH-type connectors. These boards are compatible...
$3.30 AUD, inc GST
Breakout for JST SH-Style Connector, 2-Pin Male Side-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes.
$2.90 AUD, inc GST
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
Brand: Adafruit
Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice...
$4.75 AUD, inc GST
1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have...
$2.45 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 3-Pin, 75cm
Brand: Pololu
This 3-conductor, 75 cm (30") cable has 24 AWG wires and a 3-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$6.30 AUD, inc GST
Breakout for JST SH-Style Connector, 2-Pin Male Top-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$2.80 AUD, inc GST
JST PH-Style Cable, 5-Pin, Female-Female, 10cm
Brand: Pololu
This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...
$4.70 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 6-Pin, 75cm
Brand: Pololu
This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$11.35 AUD, inc GST
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
Brand: Adafruit
That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies
$8.10 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
Brand: Pololu
This 4-conductor, 12 cm (4.5") cable has 24 AWG wires and a 4-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$3.75 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 5-Pin, 30cm
Brand: Pololu
This 5-conductor, 30 cm (12") cable has 24 AWG wires and a 5-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$5.90 AUD, inc GST
Raspberry Pi GPIO 40-Pin Ribbon Cable
Brand: Core Electronics
Extend your Raspberry Pi's functionality with this rainbow ribbon cable!
$3.70 AUD, inc GST
Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.50 AUD, inc GST
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Straight (4-Pack)
Brand: Pololu
These shrouded, 2-pin JST XH-style male connectors have straight leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.
$2.80 AUD, inc GST
6V Air Valve with 2-pin JST PH Connector - FA0520E
Brand: Adafruit
Here's a cool new valve for makers interested in pneumatic systems, hydraulics, inflatables, projects with compressed air, and the like. These air valves, also known by other names like, automatic bleeding valve or air release valve, are typically used to passively release air from a pressurized container.
$6.65 AUD, inc GST
Barrel Jack to 2-pin JST PH 2mm
Brand: Sparkfun
Two pin JST PH 2mm connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!
$6.10 AUD, inc GST
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle (4-Pack)
Brand: Pololu
These shrouded, 2-pin JST XH-style male connectors have right-angle leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.
$2.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.