Satellite Transceiver Breakout - Swarm M138

SKU: SPX-19236

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky, the Satellite Transceiver Breakout - Swarm M138 allows you to send and receive short messages. It works anywhere in the world, including the polar regions, far beyond the reach of WiFi and Cellular networks. It is perfect for a variety of low-bandwidth use cases: from connecting people and tracking vehicles, ships, or packages to relaying sensor data for agriculture, energy, and industrial IoT applications. The built-in GNSS receiver makes it perfect for many tracking applications.

At the heart of our product is a Swarm M138 satellite modem. This is a Mini-PCI Express Card containing both the satellite modem and a very capable u-blox GNSS receiver, all in one integrated package! It can operate from a wide range of supply voltages: 3.0V Min; 5.0V Max. Its standard 3.3V CMOS serial UART interface and NMEA-style command set makes it easy to integrate into your project. Our board includes both a USB-C interface (for power and/or serial data) and a full set of breakout pins. Want to plug it into your laptop or Raspberry Pi and use it to communicate out in the field? You can absolutely do that! We've written a Python3 PyQt5 GUI to get you started. Full details are available in the hookup guide and in the product repo. Want to connect it to your Arduino microcontroller board? You can absolutely do that too! Our Swarm Arduino Library makes that easy.

Our kit contains everything you need to get started:

Swarm M138 Modem
SparkFun Satellite Transceiver Breakout
VHF Antenna and Ground Plane
GNSS Antenna
u.FL cables, adapter and screws

See below for our recommended extras.

Want to know more? Click the button below to open our hook-up guide:

Note: The Swarm modem does require a data plan to send and receive data. However, the cost of this is much lower than other networks. A data plan is an annual contract for USD $60 per year (USD $5 per month). Each plan includes 750 data packets per month. Each packet can be up to 192 Bytes in size. You can also stack up to 4 data plans, allowing a single modem to use 3000 packets (576 kBytes) per month. Please see the Swarm website for full details.

Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.

Swarm Satellite Transceiver Breakout - Swarm M138 - Hookup Guide

PCB Dimensions (with modem attached):
- 3.5" x 1.4" x 0.37" (89 x 36 x 9.5mm)
SMA Connections:
- Separate, robust connectors for VHF satellite communication and GPS / GNSS positioning
Serial Interface:
- USB-C via a CH340E USB-serial converter
- 3.3V UART via 0.1" breakout pins
- Split pads allow the TX and RX breakout pins to be isolated from the CH340E
- TX and RX LEDs (configurable)
Power Supply:
- 3.0V (Min)
- 5.0V (Max)
- Power can be provided by USB-C or via 0.1" breakout pins
- "Ideal diode" power mux circuit with ~0V voltage drop
Current Draw @ 3.3V:
- Sleep: Modem: 80µA (Peak); Power Mux: ~70µA
- Receive: 26mA (Typ.); 40mA (Peak)
- Transmit: 850mA (Typ.); 1000mA (Peak)
Current Draw @ 5.0V:
- Sleep: Modem: 110µA (Peak); Power Mux: ~100µA
- Receive: 25mA (Typ.); 45mA (Peak)
- Transmit: 550mA (Typ.); 600mA (Peak)
Please note:
- When powering the board from USB, please use a USB-C or USB 3 port
- USB 2.0 is not supported

Documents

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review