per page

Items 1-25 of 39

Set Ascending Direction
  1. 2-Pin Female JST PH-Style Cable (14cm)
    Rating:
    97% of 100
    SKU: POLOLU-1116 Brand: Pololu
    This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
    - +

    21 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  2. JST-PH 2-pin Jumper Cable - 100mm long
    Rating:
    80% of 100
    SKU: ADA4714 Brand: Adafruit
    This hand little 2 pin JST PH connector is perfect for all Adafruit's battery packs!
    - +

    8 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  3. JST PH 2-Pin Cable – Male Header 200mm
    Rating:
    100% of 100
    SKU: ADA3814 Brand: Adafruit
    For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...
    - +

    32 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  4. 3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm)
    Rating:
    100% of 100
    SKU: POLOLU-117 Brand: Pololu
    This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  5. JST-PH Jumper 2 Wire Assembly
    SKU: PRT-09914 Brand: Sparkfun
    This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  6. JST-PH Jumper 4 Wire Assembly
    Rating:
    90% of 100
    SKU: PRT-09916 Brand: Sparkfun
    This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 5 to 8 day lead time
  7. JST-PH Jumper 3 Wire Assembly
    Rating:
    100% of 100
    SKU: PRT-09915 Brand: Sparkfun

    This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST-PH connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. 

    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  8. Barrel Jack to 2-pin JST PH 2mm
    Rating:
    100% of 100
    SKU: TOL-08734 Brand: Sparkfun

    Two pin JST PH 2mm connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!

    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  9. Analog Sensor Cable For Arduino (10 Pack)
    Rating:
    100% of 100
    SKU: FIT0031 Brand: DFRobot
    The analog sensor cables are especially designed for DFRobot's popular IO Expansion shield and sensors. It connects most of our analog sensor to the IO board.
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  10. JST-PH Battery Extension Cable - 500mm
    Rating:
    100% of 100
    SKU: ADA1131 Brand: Adafruit
    By popular demand, Adafruit now have a handy extension cord for all of Adafruit's JST-terminated battery packs (such as Adafruit's LiIon/LiPoly and 3xAAA holders). One end has a JST-PH...
    - +

    6 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  11. 3-Pin Female JST PH-Style Cable (30 cm) with Female Pins for 0.1" Housings
    SKU: POLOLU-1798 Brand: Pololu
    This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with female pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  12. 3-Pin Female JST PH-Style Cable (30 cm) with Male Pins for 0.1" Housings
    Rating:
    100% of 100
    SKU: POLOLU-1799 Brand: Pololu
    This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with male pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 4 to 7 day lead time
  13. JST PH to Breadboard Jumper (3-pin)
    Rating:
    100% of 100
    SKU: CAB-13685 Brand: Sparkfun
    This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 5 to 8 day lead time
  14. Pimoroni HyperPixel 4.0 I2C Cable (JST-PH to male DuPont)
    SKU: CE06354 Brand: Pimoroni
    A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display.

    Out of Stock

    Sign up to get notified when it's available to order.

  15. JST PH 3-pin Plug-Plug Cable - 100mm long
    SKU: ADA4336 Brand: Adafruit
    This cable is a little over 100mm / 4" long and fitted with JST-PH 3-pin connectors on either end. Adafruit dig the solid and compact nature of these connectors and the .. read more
    - +

    10 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  16. JST 2-pin Extension Cable with On/Off Switch - JST PH2
    Rating:
    100% of 100
    SKU: ADA3064 Brand: Adafruit
    By popular request - Adafruit now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable...
    - +

    4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  17. STEMMA Cable - 150mm 4 Pin JST-PH Cable–Female/Female
    Rating:
    93% of 100
    SKU: ADA3568 Brand: Adafruit
    This 4-wire cable is a little over 150mm / 6" long and fitted with JST-PH female 4-pin connectors on each end. These types of JST cables are commonly found on small...
    - +

    6 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  18. JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
    Rating:
    100% of 100
    SKU: ADA3950 Brand: Adafruit
    This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. Adafruit are carrying these to match up...
    - +

    10 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  19. JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
    Rating:
    98% of 100
    SKU: ADA3955 Brand: Adafruit
    This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
    - +

    6 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  20. JST PH 3-Pin Socket to Color Coded Cable - 200mm
    SKU: ADA4046 Brand: Adafruit
    This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with Adafruit's JST 3-PH cables, for extending and...
    - +

    3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  21. JST PH 4-Pin Socket to Color Coded Cable - 200mm
    SKU: ADA4045 Brand: Adafruit

    This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...

    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  22. JST PH 3-pin Plug to Color Coded Alligator Clips Cable
    Rating:
    100% of 100
    SKU: ADA4030 Brand: Adafruit
    This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with grippy mini alligator clips. Adafruit are carrying these to match up with any of our...
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 7 to 12 day lead time
  23. JST PH 4-pin Plug to Color Coded Alligator Clips Cable
    SKU: ADA4029 Brand: Adafruit
    This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. Adafruit are carrying these to match up with any of our...
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  24. Gravity 4Pin IIC/I2C/UART Sensor Cable (10pcs)
    Rating:
    100% of 100
    SKU: FIT0513 Brand: DFRobot
    The Gravity 4Pin IIC/I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 30cm length. One side is PH2.0-4p connector and the other side is XH2.54...
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Jul 15th
  25. JST PH 3-Pin Plug to Male Header Cable - 200mm
    SKU: ADA3893 Brand: Adafruit
    This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 7 to 12 day lead time
Page
per page

Did you know: We create free online courses, tutorials, and videos. For makers, by makers.

Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.

JST-PH connectors are ultra-compact 2.0mm pitch connectors, ideal for small electronics, drones, wearables, and LiPo batteries. With secure latching, a polarised design, and reliable current handling up to 2A.