52Pi ICE Tower Cooler for Raspberry Pi 4 / 3B+ / 3B
Keep your Pi 4 or Pi 3 running cool and fast under heavy load, with a copper heat-pipe tower and a colour-shifting fan.
In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow*
Disclaimer:
For next-day delivery, the shipping address must
be in the AusPost next-day network, eParcel Express must be selected, and the order must be placed
before 2PM AEST Mon-Thurs excluding NSW Public Holidays. Orders may be delayed due to AusPost
pickup timings and order verifications. eParcel Express is typically a 1-day service within the
AusPost next-day network, though it is sometimes 2+ days.
Serious tower-style cooling for the Raspberry Pi 4 and Pi 3. A copper heat pipe, a stack of heatsink fins and a colour-cycling fan work together to keep your CPU well clear of thermal throttling.
The Raspberry Pi 4 starts throttling at 80 °C, so long compiles, emulation or overclocking can quietly slow you down. 52Pi says this cooler takes an overclocked Pi from around 80 °C down to roughly 40 °C.
A 5 mm copper heat pipe draws heat up from the SoC into multi-layer fins, and a 7-blade fan pushes air straight through the stack. It runs from the Pi's own GPIO header at just 0.4 W, so you don't need a separate power supply. Steel brackets bolt it to the standard Model B mounting holes, and the fan's RGB LEDs cycle through 7 colours on their own.
Features
- Keeps sustained workloads and overclocks cool, thanks to a 5 mm copper heat pipe feeding a multi-layer fin stack
- Moves plenty of air through the fins with a 7-blade fan
- Powered straight from the GPIO header (5 V, 0.08 A), with no extra power supply or wiring
- Adds some colour to your build: the fan's RGB LEDs cycle through 7 colours automatically
- Can run quieter: move the red lead from 5 V to a 3.3 V pin for lower noise and a softer glow, at the cost of some airflow
- Bolts on securely with steel mounting brackets and brass standoffs, and thermal pads give good contact with the SoC
- Protects the board underneath with an included acrylic panel. Note: the tower is too tall for most enclosed cases.
Specifications
| Property | Specification |
|---|---|
| Compatibility | Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B |
| Cooling type | Active, single-stack tower heatsink with fan |
| Heat pipe | 5 mm copper |
| Fan | 7-blade, RGB LED (7 colours, auto-cycling) |
| Supply voltage | 5 V DC (from the Raspberry Pi GPIO header) |
| Rated current | 0.08 A |
| Rated power | 0.4 W |
| Connection | Flying leads to GPIO: red to 5 V, black to GND |
| Thermal interface | Thermal pads (included). Thermal paste is not included but can improve performance. |
Resources
What's Included
- 1x ICE Tower heatsink with RGB fan
- 2x Steel mounting brackets
- 8x M2.5 brass standoffs
- 4x M2.5 nuts
- 6x M2.5 screws
- 3x Thermal pads
- 1x Screwdriver
- 1x Acrylic protective panel
This product is listed in:
Raspberry Pi>Model B Cases (v4)>Active CoolingRaspberry Pi>Model B Cases (v4)>Accessories
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
40 Aruma Place
Cardiff
NSW, 2285
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
MicroSD Memory Card - 16GB Class 10SKU: CE04628 Brand: Core ElectronicsAdd speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card- Simplecom CR303 2 Slot SuperSpeed USB 3.0 microSD Reader/WriterSKU: CE08436 Brand: Core Electronics
A super-fast microSD card reader for all of your Maker needs!
- Raspberry Pi 5 Model B 2GBSKU: CE09784 Brand: Raspberry Pi
The 2GB Raspberry Pi 5 is the latest powerhouse in the Raspberry Pi lineup. I ...
- KKSB HAT Case for Raspberry Pi 5SKU: TPH-105822 Brand: KKSBThis KKSB Case for Raspberry Pi 5 features a spacious interior that accommodate ...
Videos
View AllGuides
Raspberry Pi 5 Vs Raspberry Pi 4 Model B | Comparison & Benchmarking
Raspberry Pi 5 | Review, Performance & Benchmarks
Safe Shut Down Button With Argon ONE Case For Raspberry Pi
3D Printable VESA Mount for Argon One Case And M.2 Case
Projects
ESP32 IR-Triggered Camera with Home Assistant Integration
Raspberry Pi Rain Radar and Weather Display
Rain Gauge Data Logger
Educational Workshops
Raspberry Pi Workshop for Beginners
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments