52Pi Low-Profile ICE Tower Cooler for Raspberry Pi 4 / 3B+ / 3B
Desktop-PC-style tower cooling, shrunk down for the Pi 4 – with a colour-cycling fan to top it off.
Out of Stock
Sign up to get notified when it's available to order.
A miniature tower heatsink and fan that bolts straight onto your Raspberry Pi's processor, borrowing the single-stack cooler design from desktop gaming PCs.
The Raspberry Pi 4 runs hot under sustained load, and once the SoC reaches its thermal limit it throttles to protect itself. A copper heat pipe draws heat from the CPU up into a stack of aluminium fins, where a 40 mm fan pushes it away. That makes this a good fit for media centres, home servers and overclocking projects that keep the CPU busy for long periods.
The low-profile design keeps the tower compact, and the fan runs from the Pi's own GPIO header, so you don't need a separate power supply. Steel mounting brackets, brass standoffs and thermal pads are included for the Pi 4 Model B, 3 Model B+ and 3 Model B.
Setup takes a few minutes:
- Fit the mounting brackets to the cooler
- Apply a thermal pad to the Pi's SoC
- Secure the brackets to the Pi with the standoffs and nuts
- Connect the red lead to a 5V pin and the black lead to GND
Features
- Draws heat away from the CPU quickly, thanks to a 5 mm copper heat pipe feeding a single-stack fin tower
- Low-profile tower that keeps the build compact without giving up much fin area
- Powered from the GPIO header (5V, 0.4 W), so no extra supply or cabling is needed
- Runs quieter if needed: move the red lead from 5V to 3V3 for lower fan speed and noise (the LEDs dim too)
- Colour-changing LED fan that cycles automatically, with no setup needed
- Acrylic protection panel and steel brackets for a sturdy, protected install
- Includes all the hardware, thermal pads and a screwdriver for Pi 4B, 3B+ and 3B
Specifications
| Property | Specification |
|---|---|
| Compatibility | Raspberry Pi 4 Model B, 3 Model B+, 3 Model B |
| Cooler type | Low-profile single-stack tower heatsink |
| Heat pipe | 5 mm copper |
| Fan | 40 mm, colour-changing LED |
| Supply voltage | 5V DC (from GPIO header) |
| Rated power | 0.4 W (5V, 0.08 A) |
| Connection | GPIO jumper leads: red (5V), black (GND) |
| Mounting | Steel brackets, M2.5 standoffs and nuts |
| Dimensions (approx.) | 62 x 43 x 40 mm |
Resources
What's Included
- 1x Low-profile ICE Tower cooler with RGB fan
- 1x Mounting bracket pack (for Pi 4B / 3B+ / 3B)
- 1x Acrylic protection panel
- 4x M2.5 x 6+6 mm brass standoffs
- 4x M2.5 nuts
- 6x M2.5 x 6 mm screws
- 3x Thermal pads
- 1x Screwdriver
- 1x Instruction sheet
This product is listed in:
Components & Parts>Fans and PropellersRaspberry Pi>Model B Cases (v4)>Active Cooling
Raspberry Pi>Model B Cases (v4)>Accessories
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
40 Aruma Place
Cardiff
NSW, 2285
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
52Pi ICE Tower Cooler for Raspberry Pi 4 / 3B+ / 3BSKU: CE10313 Brand: 52PiKeep your Pi 4 or Pi 3 running cool and fast under heavy load, with a copper ...
- Solderless Breadboard - 830 Tie Point (ZY-102)SKU: CE00304 Brand: Core ElectronicsIf you're prototyping a circuit big or small, then you'll want a quality breadbo ...
-
-
Videos
View AllGuides
Raspberry Pi 5 Vs Raspberry Pi 4 Model B | Comparison & Benchmarking
Raspberry Pi 5 | Review, Performance & Benchmarks
Safe Shut Down Button With Argon ONE Case For Raspberry Pi
3D Printable VESA Mount for Argon One Case And M.2 Case
Projects
ESP32 IR-Triggered Camera with Home Assistant Integration
SOLARBOI
RPi Cluster - SETI@Home
Educational Workshops
Raspberry Pi Workshop for Beginners
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments