Search results for: 'wire light'

Sometimes referred to as “spade connectors,” these quick disconnects are really useful as power connectors in prototyping or in projects that are repeatedly assembled...

These look a lot like our NeoPixel fairy lights here, but have a funky twist. In fact, we're a little hesitant to call them NeoPixels because while they can be controlled by "NeoPixel" code, they don't function like NeoPixels. Technically, an NeoPixel is an LED that also acts as a shift register. 24 or 32 bits of brightness data comes in the input pin, and the LED removes it and passes along the rest. This is what lets folks chain as many pixels as they like onto the end: each pixel just grabs the first color data, and passes the rest down like a bucket brigade

The strip is made of flexible wires with a coated NeoPixel every ~100mm (~4 inches) with a total of 50 LEDs

When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.

What is this, a traffic light for ants?? Yes! No, we jest again, the scaling would be completely off. Here's an adorably Lilliputian Mini Traffic...

Peep this NeoPixel RGBW Neon-like LED Flex Strip with Silicone Tubing! OK its a bit of a mouthful but check out the beautiful pics! It has a diffused look like neon, but without the need for expensive transformers, glass tubing, inert gasses, or a Las Vegas casino license. They look great, are super easy to use, and are a great way to make your projects light up!

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive...

EL (Electroluminescent) wire is a cool flexible wire which will glow when under a high AC voltage!

Enhance your Raspberry Pi 5's performance with our Water Cooling Kit, featuring precise 1:1 mold coverage for all heat sources and easy installation. Dive into efficient heat dissipation, optimal temperatures, and added flair with RGB lighting, perfect for both hobbyists and advanced users.

EL (Electroluminescent) wire is a cool flexible wire which will glow when under a high AC voltage!

Light duty speaker cable for small audio equipment, intercoms, etc. Grey outer insulation with black trace for polarity identification.

This breakout board may well be the last current sensing solution you every need to buy. Not only can it do the work of two multimeters, but it can do it with amazing...

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that...

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that...

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that...

Adding LEDs to anything makes it 5x better -- its a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is...

These panels are EL (Electroluminescence) which emits a soft glow when powered! This flexible sheet can be used for backlighting or signage much like EL wire.

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that...

These are the smallest NeoPixel breakouts around! Tiny, bright RGB pixels to your project. These little PCBs are only 8mm x 10mm and have two sets of three pads...

Give your next sensor project a nose for gasses with the Adafruit MiCS-5524 Gas Sensor Breakout. This breakout makes it easy to use this nice sensor from SGX Sensortech...

Use this right angle LED strip connector to connect two 4-wire LED strip sections to bend around a corner, curve, angle or gap, making connection natural...

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. This EL is pink-coated so that it looks white. It looks a little like thin neon. Very bendable, it keeps its shape and you can curl it around your finger. Its an easy way to add some glow to a project, not as bright as LEDs but uses a lot less power!

This is the BH1750 16-bit Ambient Light Sensor from Rohm. Because of how important it is to humans and most other living things, sensing the amount of light in an environment is a common place to get started when learning to work with microcontrollers and sensors.

These panels are EL (Electroluminescence) which emits a soft glow when powered! This flexible sheet can be used for backlighting or signage much like EL wire.

This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to...

Small form factor display for your Raspberry Pi Pico.

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with...

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it.

These Inductive Ring Proximity sensors are designed to detect metal object entering or passing through the ring, featuring less than 1ms response time, ...

This warm-white glowy letter is made out of COB (chip on board) LEDs, often seen in 'Edison-like' LED bulbs, arranged in different patterns to...

The Pi-Stop is a low cost hardware module designed to allow Raspberry Pi users to take their first steps into interfacing with the real world.

THE REACTOR'S MELTING DOWN! GRAB THE FUEL CORE, JENNA, AND EVACUATE THE COMMAND CENTER! With this flexible Red-Yellow-Green Alert Light you can monitor the status...

This flexible LED filament is often seen in 'Edison-like' LED bulbs, arranged in different patterns to give a bright warm lighting effect....

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to...

These Inductive Ring Proximity sensors are designed to detect metal object entering or passing through the ring, featuring less than 1ms response time, ...

This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to...

We carry all sorts of silicone-diffused NeoPixel strips, including these ultra-skinny 96-LED NeoPixel strips and these gloriously chonky neon-like strips. This 60 LEDs-per-meter Silicone Sheath NeoPixel strip is nicely in the middle. It has a semi-diffused look, thanks to the white silicone casing. The white rubber causes the LEDs to have a pastel shade, and of course they're incredibly durable.

What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole...

By popular request, you can now get Adafruit's 1.2" Tall 7-Segment LED backpacks without the LEDs! These backpacks feature an HT16K33 I2C LED driver, they're simple and...