The Aluminum alloy SSD cooling vest is compatible with M.2 2280 solid-state drive. Features superior heat dissipation and advanced genetic heating pads...
The Raspberry Pi Camera Module v2 is a high quality 8 megapixel, Sony camera module featuring a fixed focus lens designed for the Raspberry Pi. It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in).
This cylindrical, 1.89" x 0.98" x 0.98" brushed DC gearmotor with a 4.4:1 metal gearbox is a lower-current alternative to the HP version. These units have a 0.315"-long, 4 mm-diameter D-shaped output shaft. Key specs at 6 V: 1280 RPM and 80 mA free-run, 5 oz-in (0.36 kg-cm) and 2.2 A stall.
The DFRduino Ethernet Shield V2 is finally released. This new version supports Mega both 1280 and 2560. And it supports Micro SD card read/write as well. The ethernet shield is fully functional now. The V2 Ethernet Shield is fully compatible with Arduino Ethernet Shield. With the offical ethernet library, you can do exactly the same thing as the original one. But at a more affordable price.
If you’ve been around electronics for a while you’ll have noticed the trend of single board microcomputers targeted at hobbyists through to industrial projects, the most popular platform being the Raspberry Pi. Now the Raspberry...
If you’ve been around electronics for a while you’ll have noticed the trend of single board microcomputers targeted at hobbyists through to industrial projects, the most popular platform being the Raspberry Pi. Now the Raspberry...
A special part of me enjoys it when people go ‘I cannot believe that was 3D printed’ and one of the best ways to get that reaction is through post-processing. Now not to belittle the beauty of a raw print result you can achieve ...
A special part of me enjoys it when people go ‘I cannot believe that was 3D printed’ and one of the best ways to get that reaction is through post-processing. Now not to belittle the beauty of a raw print result you can achieve ...
Demonstrated here are two metallic finishes, that you can do to any 3D print, that will astound your friends and family when you tell them 'It was actually 3D printed and these are not metal at all'. These finishes are perfect to use for co...
Demonstrated here are two metallic finishes, that you can do to any 3D print, that will astound your friends and family when you tell them 'It was actually 3D printed and these are not metal at all'. These finishes are perfect to use for co...
In this getting started guide we’ll use the Pytrack from Pycom to detect our location on Earth using the onboard GPS module and use the accelerometer to control a 3D model on the PC. I put a WiPy onto my Pytrack, connected it to ...
In this getting started guide we’ll use the Pytrack from Pycom to detect our location on Earth using the onboard GPS module and use the accelerometer to control a 3D model on the PC. I put a WiPy onto my Pytrack, connected it to ...
Introduction
The Makerverse Nano Power Timer is an ultra-low current consumption power controller designed to periodically turn on a battery powered microcontroller. It is perfect for maximising the battery life of data-logging sensor...
Introduction
The Makerverse Nano Power Timer is an ultra-low current consumption power controller designed to periodically turn on a battery powered microcontroller. It is perfect for maximising the battery life of data-logging sensor...
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosure, I'm just about ready to turn on some serious 3D printing work. But before I dive into that endless pool of fun, it's a good time to take ...
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosure, I'm just about ready to turn on some serious 3D printing work. But before I dive into that endless pool of fun, it's a good time to take ...
Heads up! Our forum has separate search to our main website. You are about to be redirected to our forum and when you arrive you can search for forum only content using the icon shown below. Click continue to search our forum.
Please continue if you would like to leave feedback for any of these topics:
Website features/issues
Content errors/improvements
Missing products/categories
Product assignments to categories
Search results relevance
For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.
Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.
Makers love reviews as much as you do, please follow this link to review the products you have purchased.