empowering creative people

Raspberry Pi > Retro Pi

Retroflag SUPERPi Case for Raspberry Pi 3 Model B+

SKU: CE06074

$34.95 AUD, inc GST
$31.77 AUD, exc GST

More Views

Retroflag SUPERPi Case for Raspberry Pi 3 Model B+
34.95 AUD

SKU: CE06074

$34.95 AUD, inc GST
$31.77 AUD, exc GST

Shipping:

  • $6.95 Standard (2-4 days, tracked)
  • $9.95 Express (Overnight*, tracked)
  • $3 Economy Post* (3-7 days, no tracking)
  • FREE Pickup (Newcastle only)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This is a SNES inspired case for the Raspberry Pi 3 B+ will let you relive the joy of the classic gaming consoles from the early 90s. If you were on the other side of the SNES vs Megadrive Debate or the SNES is not quite retro enough for you check out the MEGAPi and NESPi cases. All of the RetroFlag cases come with working power and reset buttons(require scripts) as well as storage for extra SD cards. 

* Safe shutdown scripts: https://github.com/RetroFlag/retroflag-picase

Classic SNES Style

This Raspberry Pi case uses the most iconic elements of the SNES to Create a design that is both a functional and beautiful recreation of the original console's design. 

LAN & USB cover

Behind the small sliding door at the back of the case, you can access the LAN port and 2 USB ports and hide them when they are not in use.

Improved HDMI and Audio ports

The MEGAPi and SUPERPi have been designed to allow the HDMI and Audio Port to plug directly into the Pi. This upgrade means that there an improvement to the quality of the video and audio output. 

Micro SD Storage.

The SUPERPi has a large storage area for spare SD Cards hidden under the dust cover for the cartridge port, the case also has easy access the SD card so that the Image can be swapped easily. 

To create a RetroPie setup, at a minimum, you'll need a Raspberry Pi 3 Model B+, a Power Supply, a controller, and a RetroPie micro SD card

Compatibility

  • Raspberry Pi 3 Model B+
  • Raspberry Pi 3 Model B
  • Raspberry Pi 2 Model B

Connectivity and Cooling

Connecting your Pi up inside the case is easy. Just plug the Ethernet, USB and GPIO pins in, and you're ready to go. There's also room to mount a 30mm fan inside for additional cooling plus plenty of room for mounting a heatsink. If you'd like to learn more about cooling your Pi and whether you need a heatsink or a fan, take a look at our tutorial for Cooling your Raspberry Pi.

Features and Specs

  • Safe Shutdown and Safe Reset
  • 2x USB ports
  • HDMI, 3.5mm, USB, Ethernet, and micro USB (power) access
  • Power and Reset buttons with GPIO connector
  • 30mm fan mount with bottom panel air vents
  • Spare micro SD card storage
  • Product Dimensions: 110mmx133mmx40mm

Package Includes

  • SuperPi Case
  • Instruction Manual
  • Screwdriver

This product is listed in:

Documentation and Resources:
Educational Workshops
  • Raspberry Pi Workshop for Beginners
  • Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our series of bite-sized videos that cover everything you'll need to know to get started with your Raspberry Pi, and start making awesome projects. My name...
  • Rain Gauge Data Logger
  • Summary A Raspberry Pi 3B is used to collect digital counts from an electronic rain gauge (1mm of rain per reed switch closure by magnetic see-saw). It has been running without issues for over 12 months. A UPS powers the Pi so it is immune from short power glitches. The total count is displayed on an LCD screen with reset and inc/dec test buttons. “To HTML” and “To LCD” routines are also included to simp...
  • Television Media Centre
  • Introduction: I have a flat screen television that is about 7 years old that I purchased before Smart TVs were commonly available. What I wanted to achieve with My Pi project was to turn my slightly old TV into a media centre. I wanted to play music through my TV as well as play saved movies and stream internet content. It was important for me to be able to stream ABC iView and SBS On Demand as they provide a free service and ...
  • Retro Hand held Pi Zero
  • I bought a Pi zero w from Core Electronics for a friend, also bought the official case too but thought I'd fit the Pi into something he can show off! I used an old hand held game case I had laying around, I had to remove the original circuit board and plan where to place the Pi board....
  • mintyPi
  • This is an awesome project that takes about 6 hours to complete. Hours upon hours of endless fun thereafter! Ideally, some prior soldering experience is advantageous but if you take your time and practice before you start it's beginner friendly! The battery will give just over 3 hours on a single charge and can be recharged via the handy micro USB port. System updates, ROM transfers etc all possible with the Pi Zero W' built in...
  • RetroPie in a Cartridge
  • For $50 and some dedication a retro gaming console can be yours and with HDMI you can play it with any modern TV or monitor. Instead of using bulky and space taking cartridges and discs it's all on the console. For this build, we're going to use Retropie, an awesome software package that handles all your emulation needs with inbuilt Bluetooth and wireless needs. Any Pi can run RetroPie, but I recommend using the Raspberry Pi Ze...

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

We deliver Australia-wide with these options:

  • $3 for Small Items (3-7 days, not tracked, only available on selected small items)
  • $6.95 for Standard Post (2-4 days, tracked)
  • $9.95 for Express Post (Overnight for most of Australia, 2+ days for rural, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (only after we email you to notify your order is ready)

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11.49 for Pack and Track (3+ days, tracked)
  • $16.50 for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount might increment based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!