Polymaker PolyBox Edition II

Rating:
95% of 100
SKU: CE06665 Brand: Polymaker
PolyBox™ is a dry storage box designed to provide the optimum environment for 3D printing filaments. The PolyBox™ is compatible with all 3D printers and can house two 1kg spools or one 3kg spool.
$89.95 AUD, inc GST
$81.77 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Mon, 25th of Nov

Quantity Discounts:

  • 3-5 $80.95 (exc GST)
  • 5+ $80.14 (exc GST)
  • 10+ $79.32 (exc GST)

Restrictions apply to this equipment as it uses button/coin cell batteries:

  • The equipment is intended to be used in trades, professions or industries
  • The equipment is not intended for sale to the general public
  • The equipment is not intended to be used where children are present
  • You are aware that this equipment may not meet child safety testing requirements as it is not intended to be used by consumers or general public, but rather, is intended to be used in trades, professions or industries in conjunction with the limitations and restrictions listed above
  • You are aware that these restrictions are due to a change in Australian legislation in 2022 for button/coin cell batteries

Button Battery Warning

A declaration of use will need to be submitted during checkout.

- +

8 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

PolyBox™ is a dry storage box designed to provide the optimum environment for 3D printing filaments. The PolyBox™ is compatible with all 3D printers and can house two 1kg spools or one 3kg spool.

Protect your Filament

The PolyBox™ Edition II provides the optimum printing environment for 3D Printing filaments. Humidity is maintained below 15% to increase filament life span and to ensure consistent mechanical properties from the start to the end of the spool.

Easy Maintenance / Monitoring

The PolyBox™ Edition II includes a built in high precision thermo-hygrometer to allow the user to monitor the humidity and temperature inside the PolyBox™. Maintaining the PolyBox™ Edition II is simple with the included microwavable desiccant.

Safe / Low Cost

The PolyBox™ Edition II is incredibly safe and economical out of the box solution, requiring no cables / electricity.

Multiple Materials

The PolyBox™ Edition II can print with up to two 1kg spools simultaneously, perfectly suited for spooling multiple printers, dual extrusion printing or load one 3kg spool for longer prints or industrial users.

Compatibility

The PolyBox™ Edition II features six rubber exit holes, three installed in the base and three installed on the reversible transparent cover. With the PolyBox™ Edition II changing spools is as easy as ever. No matter how your printer feeds, the PolyBox™ Edition II is designed to suit your workspace.

About Moisture

Moisture content in filaments can cause a multitude of problems from inconsistent extrusion to poor surface quality and ultimately delivering a printed part with weak mechanical properties due to poor layer adhesion. In environments with >20% humidity, water molecules are quickly absorbed into the filament forming polar bonds with the polymer chain. When the filament passes through the hot end the moisture rapidly expands, boiling and rupturing the filament. This causes bubbles in between layers, inconsistent extrusion due to material expansion and poor surface quality due to the fluctuating flow rate.

Materials such as PVA, Nylon and PolySmooth™ are particularly susceptible to moisture absorption, however other materials like ABS and PLA are also hygroscopic.

Specifications

  • Desiccant type Silica gel
  • Desiccant specifications 4*Desiccant sachets 100g
  • Supported filament spools 2 spools ≤ 1kg or 1 spool 3kg
  • Humidity range 10-99%
  • Accuracy ±5%
  • Resolution 1%
  • Response 10 seconds
  • Temperature range -50~70 °C
  • Accuracy ±1 °C
  • Battery specifications LR44*1
  • Product size 315(L)*190(W)*310(H)
  • Package size 196(L)*320(W)*320(H)
  • Product weight (without
  • Desiccants and wires) 1.150kgs
  • Package weight 1.700kgs

Operation Manual

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

3D Printing Better Print-in-Place Mechanisms

Print-in-Place mechanism is one of the special things about additive manufacturing that all other ma...
Print-in-Place mechanism is one of the special things about additive manufacturing that all other ma...

More Exciting Features - Ultimaker Cura

Cura is constantly being improved upon and half the fun is keeping on top of all the new changes and...
Cura is constantly being improved upon and half the fun is keeping on top of all the new changes and...

3D Printing Onto Fabrics

One of the swell things about 3D printers is being able to lay fabric onto a build plate and create ...
One of the swell things about 3D printers is being able to lay fabric onto a build plate and create ...

Create Fantastic Finishes on 3D Printed Components

A special part of me enjoys it when people go ‘I cannot believe that was 3D printed’ and...
A special part of me enjoys it when people go ‘I cannot believe that was 3D printed’ and...

Projects

BuzzBox

Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the Piico...
Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the Piico...

Concrete Lamp

The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1...
The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1...

The Hipster Coaster

We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydn...
We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydn...

Educational Workshops

3D Printing (FFF) Workshop

Welcome to the 3D Printing Workshop! I'm Aidan from Core Electronics and in this workshop we are g...
Welcome to the 3D Printing Workshop! I'm Aidan from Core Electronics and in this workshop we are g...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.