Pi Hut Modular Raspberry Pi 4 Case - Black

Introducing Pi Hut's Modular Raspberry Pi 4 Case

This fully customisable case is designed to suit a range of Raspberry Pi applications. It features modular design, allowing enhanced security, functionality and compatibility with additional hardware such as HATs and Vesa mounts.

All Ports Accessible

Upgrade your Raspberry Pi setup with this premium case. It provides easy access to all ports, with light pipes for LED visibility. The case also features dedicated slots for GPIO, CSI, and DSI cables, and a clever SD card holder (with an optional cover for added protection).

Fan Cooling Option

The lid of the case has a fan mounting section, allowing easy installation of one of our 5V GPIO fans. The case can still fit one of our XL heatsinks or heatsink sets, even with a fan fitted.

Stackable Design

The case can grow with your project, thanks to optional spacer layers (available separately) that can be stacked up to 5 spacers high. Additional screws are required for more than 1 spacer, which are also available separately.

Upgrade your Raspberry Pi experience with Pi Hut's customisable modular case.

Please note: Due to the lid's fan mounting points, spacers will be required to fit most HATs.

Large rubber feet are also included with the case to ensure your project is sturdy and rattle-free.

Features

• Raspberry Pi 4 two-part (lid & base) plastic case
• LED Status Light Pipes
• Pi is fixed to the case with screws for a secure fitting
• Secure case locking via screws (included)
• Airflow - Internal volume perfect for adding heat sinks
• GPIO 40-pin ribbon cable slot
• Combined CSI camera cable and DSI video cable slot
• Internal SD Card Holder
• Streamlined looks
• Dedicated wall mounting points
• Matt finish body with gloss lid
• Available in black and clear
• Designed in the UK
• Strong & Durable ABS Plastic

Case Dimensions

• Length: 104.95mm
• Width: 74.95mm
• Height: 36.00mm

In the Box:

• 1x Modular Pi 4 Case
• 4x Pi Mounting Screws
• 4x Case lid screws
• 4x Adhesive rubber feet

Modular Add-On Options Include the Following:

Micro SD Card Cover

• Flush, lockable and tamper-proof
• Secure your micro-SD card from probing fingers
• Protect your micro-SD card from accidental knocks & bangs

10mm Stackable Spacers

• Allows your case to be used with HATs
• Spacers raise the internal height by 10mm
• Can be stacked to increase internal height by up to 50mm (5 spacers)
• Great for embedded applications and hobbyist projects

VESA Mounts

• Two Types Available Depending on VESA Spacing
• VESA Splash Enables the use of MIS-D 75/100 M4
• VESA Slice Enables the use of MIS-F 200mm M6
• Great for media & signage applications e.g. hiding the Pi behind a monitor or TV

Spacer plates are designed to be stacked up to 5 spacers high, so you can grow your Pi case with your project! Additional Screws are Required for more than 1 Spacer.