PA Amplifier Stereo 2x250W

SKU: AA4164

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.
The Q series amplifiers are designed to be installed in the most demanding of commercial audio applications such as pub PAs, nightclubs, mobile DJs, cinemas and sporting venues. They are uniquely contemporary in appearance and offer high fidelity performance as individual stand alone amplifiers or stereo amplifiers. Each channel is powered by an independent power supply with high efficiency toroidal transformer. They can be configured to operate in bridge mode (mono) providing up to a massive 1200W RMS power to an 8 ohm load (A 4170). They will provide full rated power at less than 0.1% total harmonic distortion.
The design incorporates a thermally cued fan forced cooling system.
The protection circuitry employed in the design ensures the integrity of the amplifiers under overload conditions. The circuit even protects itself when a total short circuit is applied across the output terminals. The 'soft start' limiter will immediately shut down the output drive in overload or short circuit conditions, then will gradually restart when the fault condition has been removed.
Each channel includes its own recessed front mounted volume control and rear panel mounted XLR & 6.35mm phono jack balanced inputs with selectable sensitivities of 0.77V, 1.4V and 3.5V. This allows input signals from a wide variety of source equipment. Output connections are made via heavy duty binding posts or industry standard heavy duty speaker connectors.

Picture for illustration purposes, A 4164 model number is Q250

Features

  • Rugged heavy duty construction
  • 19" rack mount
  • Stylish cosmetics
  • 3 modes of operation - stereo, parallel and bridged
  • Selectable input sensitivity
  • Independent power supplies for each channel
  • Soft start limiter
  • Earth lift switch
  • Limiter on/off switch
  • XLR & 6.35mm balanced inputs
  • Binding post & industry standard heavy duty output speaker connectors
  • Front & rear carry handles
  • Clipping & overload/overdrive protect indicators
  • Recessed detent volume controls for each channel
  • Thermally cued fan forced cooling
  • 2 Year Warranty


Specifications

  • Output Power 8 Ω: 2x250W RMS
  • Output Power 4 Ω: 2x400W RMS
  • Output Power Bridged 8 Ω: 650W RMS
  • Frequency Response: 10Hz - 50KHz -1.5db
  • Imput Sensitivity: 0.77, 1.4, 3.5V
  • Signal to Noise Ration: >95dB
  • Dimensions(WxDxH): 482x460x88
  • Weight: 16kg
  • *Specifications subject to change without notice

Downloads

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

The Snooze Logger - A Wearable Sleep Position Monitor

Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...
Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.