Home
Shop
Retired
NUCLEO L152RE - Development Board for STM32 (Seeed Studio)

Skip to the beginning of the images gallery

NUCLEO L152RE - Development Board for STM32 (Seeed Studio)

SKU: SS105990014 Brand: Seeed Studio

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.

The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer.

The STM32 Nucleo board comes with the STM32 comprehensive software HAL library together with various packaged software examples, as well as direct access to mbed online resources.

Here lists the order codes and the respective targeted MCU.

Order codeTargeted MCU

NUCLEO-F030R8STM32F030R8T6

NUCLEO-F072RBSTM32F072RBT6

NUCLEO-F103RBSTM32F103RBT6

NUCLEO-F302R8STM32F302R8T6

NUCLEO-F334R8STM32F334R8T6

NUCLEO-F401RESTM32F401RET6

NUCLEO-F411RESTM32F411RET6

NUCLEO-L053R8STM32L053R8T6

NUCLEO-L152RESTM32L152RET6

The meaning of NUCLEO-TXXXRY codification is as follows:

•TXXX describes the STM32 MCU product line

•R describes the pin count (R for 64 pins)

•Y describes the code size (8 for 64K, B for 128K, E for 512K)

The order code is printed on a sticker placed at the top or bottom side of the board

Key Features

•STM32 microcontroller with LQFP64 package

•Two types of extension resources

Arduino Uno Revision 3 connectivity

STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os

•mbed-enabled (mbed.org)

•On-board ST-LINK/V2-1 debugger/programmer with SWD connector

selection-mode switch to use the kit as a standalone ST-LINK/V2-1

•Flexible board power supply

USB VBUS or external source(3.3 V, 5 V, 7 - 12 V)

Power management access point

•Three LEDs

USB communication (LD1), user LED (LD2), power LED (LD3)

•Two push buttons: USER and RESET

•USB re-enumeration capability: three different interfaces supported on USB

Virtual Com port

Mass storage

Debug port

•Comprehensive free software HAL library including a variety of software examples

•Supported by wide choice of Integrated Development Environments (IDEs) including IAR, Keil, GCC-based IDEs

Document

•Product specifications DB2196: STM32 Nucleo boards

•User manual UM1724: STM32 Nucleo boards

•User manual UM1727: Getting started with STM32 Nucleo board software development tools

•Board manufacturing specification

•Bill of Materials

•Schematic Pack

•Flyer: STM32 32-bit MCU family

•License agreement

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$6+ for Standard Post (typically 6+ business days, tracked)
$10+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$11+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review