Home
Shop
Retired
Miniware 4-Channel Mini Oscilloscope

Add to Wish List

Skip to the beginning of the images gallery

Miniware 4-Channel Mini Oscilloscope

SKU: FIT0909 Brand: DFRobot

Retired Product

Replaced by: CE07864

This product has been replaced by: CE07864
This product is no longer available. This page is only for reference.

Introduction

This is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering tasks and it is based on the ARM Cortex M3 core.

The oscilloscope uses FPGA to manage the external ADC’s control and data cache mode. It provides 4 application partitions for loading and upgrading up to 4 different application firmware. The built-in 8MB USB flash drive allows users to conveniently store waveforms and upgrade the system firmware.

4-Channel Mini Oscilloscope

Mini size, lightweight, portable, and handheld; Just about 1/62 of the size of a benchtop oscilloscope; All operations can be done with 4 buttons + 2 encoders.

4-Channel Mini Oscilloscope

Up to 100M Sa/s real-time sampling rate instead of the equivalent sampling rate.

4-Channel Mini Oscilloscope

4 input channels, 2 digital + 2 analog channels; 1 output channel. Each channel can be freely switched; Supports user-defined outputs like waveform, frequency, duty cycle, etc., suitable for various occasions.

4-Channel Mini Oscilloscope

The waveform data can be stored, and the waveform analysis and comparison are more efficient and intuitive; +2% voltage accuracy and +1‰ frequency accuracy; Repeatedly polish the front-end analog circuit to optimize the noise floor to ensure accurate and reliable measurement.

4-Channel Mini Oscilloscope

It is suitable for experimental teaching in schools, electronic maintenance, engineering applications, and so on.

4-Channel Mini Oscilloscope

Features

Based on the ARM Cortex M3 core

Mini size, lightweight

Applications

Experimental teaching in schools

Electronic maintenance

Engineering applications

Specification

CPU: ARM Cortex M3

FIFO & Control: FPGA

ADC: HWD9288-100

Analog Channels: 2([CH_A] [CH_B])

Digital Channels: 2([CH_C] [CH_D])

Operation Channel: INV [CH_A], INV [CH_B], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] | [CH_D]

Vertical Sensitivity: 10mV-10V/div (1-2-5 STEP) (using X1 probe) 100mV-100V/div (1-2-5 STEP) (using X10 probe)

Vertical Resolution: 8 bits

Sample Memory Depth: 4 channels, 4*4K

Coupling: DC, AC

Max Input Voltage: ±40Vpp (using X1 probe) ±400Vpp (using X10 probe)

Trigger Types: Ascend/Descend Edge Trigger Mode, Pulse Width Trigger, Logic Trigger

Trigger Mode: automatic, standard, single, instant scan

Signal Source: Square wave: 20 gears 3Vpp signal source from 10Hz to 8MHz Sine wave, triangle wave, sawtooth wave: 11 gears of 3Vpp signal source from 10Hz to 20KHz

File Storage Capacity: built-in 8M USB disk

File Storage Format: BMP, BUF, CSV

Automatic Measurement Type: maximum value, minimum value, peak-to-peak value, average value, effective value, frequency, period, pulse width, duty cycle

Cursor Measurement: time value, amplitude value

Display Mode: 4 lines display: Line 1: [CH_A], HIDE Line 2: [CH_B], HIDE Line 3: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE Line 4: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] | [CH_D], HIDE

Sampling Mode: real-time sampling

Sampling Rate: 100M Sa/s

Battery Power Supply: 1000mAh

Dimensions: 99.5mm (length) x58.5mm (height) x13.5mm (thickness)

Documents

User Guide

Parts List

Mini 4 Channel Oscilloscope x1

x1 / x10 Probe x2

USB Cable x1

Hex Wrench x1

Instruction x1

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review