Kitronik :MOVE Motor for the BBC micro:bit

SKU: CE07188 Brand: Kitronik

The Kitronik :MOVE Motor for the BBC micro:bit provides a fun introduction to buggy robotics. More than just a programmable buggy, learning to use all of the included features will give the budding roboteer a solid grounding in robotics as a whole.

$73.10 AUD, inc GST

$66.45 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 24th of Dec

Quantity Discounts:

6-12 $64.46 (exc GST)
12+ $63.13 (exc GST)

Recommended Essentials:

micro:bit V2.2 Board

$27.78

Learn about movement, how to utilise light and sound, obstacle detection and avoidance, and how to code :MOVE Motor to follow a line. When used in conjunction with the micro:bit's radio features, the possibilities are endless.

Attached to the chassis are two bi-directional DC motors with variable speed control. The wheels have rubber tyres and are a simple push-fit onto the motor shafts. Slot a BBC micro:bit into the edge connector and you are ready to code. There is no other assembly required and no tools required.

There are built-in battery holders for 4x AA batteries. This provides a regulated voltage supply to power the BBC micro:bit which is fed into the edge connector. There is also a power switch to conserve batteries when the buggy is not in use.The micro:bit slots into the onboard edge connector. Code the micro:bit, plug it into the buggy, switch the power on, and then play.

:MOVE Motor can be coded using the Microsoft MakeCode editor. Kitronik has produced a set of custom MakeCode blocks to simplify coding the completed buggy. The booklet that comes with the buggy contains more detailed instructions on using the blocks and writing code. If you are feeling more adventurous or relish a challenge, :MOVE Motor can also be coded with Python and Kitronik have developed a MicroPython library specifically for this board! We have also produced some example Python code which you will find at the foot of the page.

Also within the booklet (that comes inside the box), are some quick tutorials to get you started. There are also additional online tutorials and step by step guides for extra projects.

Note:

This kit does not include a micro:bit, a micro:bit can be obtained from here.
No soldering is required!
Minimal assembly required.

Features:

Works with both the micro:bit V1 and micro:bit V2
The Kitronik :MOVE Motor for the BBC micro:bit provides a fun introduction to buggy robotics and coding.
It is backed up by a range of fun tutorials to introduce you to all of the great features.
All of the tutorials and resources are free.
There is no soldering required and assembly is quick and super simple.
The buggy features two bi-direction DC motors.
There are ultrasonic distance and line following sensors onboard.
It also features a Piezo sounder and pen mount.
There are 4 full-colour programable ZIP LEDs.
Two-pin outputs that are ideal for servo connections (can be used for other inputs and outputs).
The battery holder is built onto the chassis.
The buggy is also fitted with a power switch to conserve the batteries.
There is also an onboard edge connector for the micro:bit, code, plug and play.
Kitronik has produced custom MakeCode blocks to simplify coding with the MakeCode editor.
It is available as a single buggy kit or as a 20pk. The 20pk represents a cost-saving, making it ideal for the classroom.

Contents:

The contents below are for a single :MOVE Motor pack.

1 x :MOVE Motor chassis.
2 x Wheels and tyres.
1 x Booklet

Accessories:

Pen lifting attachment

Dimensions:

Length: 111mm.
Width: 90mm (with wheels attached).
Height: 67mm.

This product is listed in:

Micro:bit>Kits

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!