Replacement Motor Kit for Maqueen V5 STEM Robot

SKU: DFR1224 Brand: DFRobot
Broken motor on your Maqueen V5? Easily fix it with this official N20 motor replacement kit. Includes the motor, bracket, and screws to get your robot...
Special Price $7.70 AUD, inc GST
Regular Price $8.90 AUD, inc GST
$7.00 AUD, exc GST
Special pricing ends 14 December 2025
* this special may end earlier than shown

Available with a lead time
Expect dispatch between Sep 25 and Sep 29

- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The Maqueen V5 is a robust robot, but accidents can happen in the classroom or during intense project sessions. Contaminants like dust, hair, or particles can jam the gears, or rough handling might damage a motor.

But a broken motor doesn't mean the end of your robot! This official N20 motor accessory kit is designed for a quick and simple repair, allowing you to restore your Maqueen V5 to full functionality in minutes.

Please Note: This is a replacement part. The Maqueen V5 educational robot comes complete with the two motors required for operation. You do not need to purchase this kit when buying a new Maqueen V5. Each kit contains one motor and the necessary mounting hardware. If both motors on your robot are damaged, you will need to purchase two kits.

Specification

  • Interface: 2P 2.54mm Pin Header (Straight Type)
  • Screw: M2×8 Cross-Recessed Pan Head Combination Screw

Motor Details:

  • Model: N20
  • Rated Voltage: 3V DC
  • No-Load Speed: 10,000 RPM (at Rated Voltage)
  • Gear Reduction Ratio: 1:110 (Mechanical Reduction)
  • Output Shaft Speed: 90 RPM (at Rated Voltage)
  • Rotation Direction: CCW (Counterclockwise, Viewed from Output Shaft End)

 

Component Materials:

  • Motor Mount: ABS (Acrylonitrile Butadiene Styrene)
  • Sponge Pad: Black Closed-Cell Polyurethane Foam Tape, Single-Sided Adhesive, 20mm×15mm×5mm

 

Documents

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

The Skeg Flexer - A Surfboard Fin Test Jig

This project started because I was laid up, unable to surf. It was something I’d been wanting...
This project started because I was laid up, unable to surf. It was something I’d been wanting...

The Snooze Logger - A Wearable Sleep Position Monitor

Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...
Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.