Creality UV Resin 500g - Green

Rating:
100% of 100
SKU: CE06815 Brand: Creality
LCD/DLP common photosensitive resin with several colors specializes in SLA 3d printer, high accuracy, stable printing models and fast printing speed.
$43.90 AUD, inc GST
$39.91 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 2nd of Apr

Quantity Discounts:

  • 10-25 $38.31 (exc GST)
  • 25+ $37.12 (exc GST)
- +

93 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

  • $6+ Standard (5+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online)

Road transport only for this product. Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Low viscosity and good fluidity: With good fluidity, this resin can quickly mold after it infiltrates the model, improving the success rate of the model, reducing the release force and adhesion of the resin, precisely improving the printing accuracy, and make it easier to clean the machine and model.

High printing accuracy: Low shrinkage rate, stable printing size, high printing accuracy, the model feels delicate with the smooth surface, and all detail shows up clearly.

Quick printing speed: Ensure the strength of the model and does not shrink excessively, increasing the printing speed with shortening the curing time, simultaneously improving the printing efficiency of the LCD machine as much as possible.

Bright and colourful: Multiple colours to suit your project needs

Please note this resin is intended for use only with Creality Resin Printers: See the LD-002R LCD Resin printer!

Wide range of applications: Film models, Low wax Casting, Gift Craft, Research experiments, Architectural progress and Dental Customization

Product Tips

  1. Do not attempt to use the unit in any way not described in the instructions to avoid accidental personal injury and property damage
  2. Do not place the unit near flammable or explosive materials or high heat sources. Place the unit in a vented, cool and dust-free environment.
  3. Do not place the printer in a vibrating or unstable environment. The shaking of the printer will affect the print quality
  4. It is recommended to use the manufacturer's recommended material to avoid damage to the printer.
  5. The power plug should be plugged into a three-hole socket with a ground wire. Please use the power cord supplied with the unit. Do not use other product power cords during the installation process.
  6. Do not touch the photosensitive resin directly, especially your eyes. If skin irritation or discomfort is caused, please immediately clean with water. if the condition is serious please consult a doctor promptly.
  7. Do not touch the skin when cleaning the finished product or touching the photosensitive resin. The photosensitive resin is an epoxy resin that is irritating to the skin. Please wear protective gloves for operation.
  8. Do not remove the trough at will to prevent the resin on the molding platform from dripping onto the screen.
  9. Do not use pointed sharp products to scrape the trough release film. If there is any printing residue in the trough, remove the molding platform and then take out the trough, empty the resin, filter the residue with a filter, and clean the trough. Pay attention to the protection of the trough when the residue is used to please note that trough is a valuable item.
  10. Do not use in direct sunlight or strong light. The printer must be used in the clear air without obvious floating objects, temperature: 26±5 degrees celsius. For high-quality printing. Please print in a constant temperative environment.

Material User Instructions

  1. Store in a light-shielded seal at room temperature
  2. The resin remaining in the trough should not be exposed to air for a long time. If it is more than one week, it is not recommended to store it separately again.
  3. The resin that has been used on the printer should not be poured back into the unused new resin. It can be stored in other clean containers, sealed with plastic wrap and stored in an environment exposed to NO UV light.'
  4. Keep out of reach of children to avoid eating.

This product is listed in:

3D Printing>Resins>Creality Resin

Product Comments

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online)

This product can be shipped by road only.

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Write Your Own Review

Videos

View All

Guides

Layer Heights when Resin 3D Printing | Accurate 28mm Scale Models or Maximum Printer Output

Speed or Perfection? That choice is what an understanding of Layer Heights whenever Resin 3D printin...
Speed or Perfection? That choice is what an understanding of Layer Heights whenever Resin 3D printin...

Resin 3D Printing Cheat Sheet

Nothing beats a good cheat sheet. So wouldn't it be great to have a single image, that encapsulated...
Nothing beats a good cheat sheet. So wouldn't it be great to have a single image, that encapsulated...

Optimal Layer Exposure Time for Perfect Resin Prints

Layer Exposure Time is the crucial parameter that when dialed in will change average 3D resin printe...
Layer Exposure Time is the crucial parameter that when dialed in will change average 3D resin printe...

Preparing a Computer Model for Resin 3D Printing – Lychee Slicer

So you have a 3D CAD (Computer-Aided Design) file and you want to 3D print it with a resin printer. ...
So you have a 3D CAD (Computer-Aided Design) file and you want to 3D print it with a resin printer. ...

Projects

BuzzBox

Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the Piico...
Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the Piico...

Concrete Lamp

The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1...
The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1...

The Hipster Coaster

We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydn...
We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydn...

Educational Workshops

3D Printing (FFF) Workshop

Welcome to the 3D Printing Workshop! I'm Aidan from Core Electronics and in this workshop we are g...
Welcome to the 3D Printing Workshop! I'm Aidan from Core Electronics and in this workshop we are g...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.