Search results for: 'type k glass braid insulated thermocouple'
Thermocouple Type-K Glass Braid Insulated Stainless Steel Tip
Brand: Adafruit
Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare wires stainless-steel tip probe which can measure air or surface temperatures...
$18.40 AUD, inc GST
Thermocouple Type-K Glass Braid Insulated - K
Brand: Adafruit
Thermocouples are best used for measuring temperatures that can go above 100 °C. This is a bare wires bead-probe which can measure air or surface temperatures. Most...
$19.95 AUD, inc GST
Thermocouple Type-K Glass Braid Insulated - 5m
Brand: Adafruit
Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare-wire bead-probe which can measure air or surface temperatures. Most...
$43.55 AUD, inc GST
Thermocouple Type-K Glass Braid Insulated
Brand: Sparkfun
36" high temperature Type-K Thermocouple with glass braid insulation.
$33.90 AUD, inc GST
Adafruit Universal Thermocouple Amplifier MAX31856 Breakout
Brand: Adafruit
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, as well as calculations to handle any non-linearities. For a long...
$30.65 AUD, inc GST
Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade) - v2.0
Brand: Adafruit
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced...
$28.25 AUD, inc GST
Analog Output K-Type Thermocouple Amplifier - AD8495 Breakout
Brand: Adafruit
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. Adafruit have a couple digital thermocouple amplifiers in the shop already...
$20.60 AUD, inc GST
Adafruit MCP9600 I2C Thermocouple Amplifier - K, J, T, N, S, E, B and R Type T
Brand: Adafruit
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9600 does all that for you, and can be easily interfaced...
$30.15 AUD, inc GST
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals)
Brand: Sparkfun
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature...
$50.95 AUD, inc GST
Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier - STEMMA QT / Qwiic
Brand: Adafruit
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9601 I2C Thermocouple Breakout (a.k.a MCP96L01) does all that for you and can be easily interfaced with any microcontroller or single-board computer with I2C.
$28.45 AUD, inc GST
Thermocouple Connector - PCC-SMP-K
Brand: Sparkfun
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB. This little connector is actually the exact part we recommend using with our SparkFun Thermocouple Breakout! Each connector can easily attach to a printed circuit board with it’s included mounting clip.
$20.65 AUD, inc GST
Gravity: CT1780 1-Wire K-Type Thermocouple Amplifier (-270°C to +1372°C Temp Range)
Brand: DFRobot
Accurately measure extreme temperatures (-270°C to 1372°C) with the Gravity CT1780 1-Wire K-Type Thermocouple Amplifier. Ideal for ovens, kilns, and furnaces...
$32.52 AUD, inc GST
SparkFun Thermocouple Breakout - MAX31855K
Brand: Sparkfun
The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one). Once this is achieved, a voltage potential is formed and current flows. The SparkFun Thermocouple Breakout takes a standard Type-K thermocouple in one end, digitizes the temperature measured and sends that data out the other end via a SPI interface, thereby interpreting the data and translating it for you to read!
$34.95 AUD, inc GST
Pimoroni MCP9600 Thermocouple Amplifier Breakout
Brand: Pimoroni
This top-of-the-range MCP9600 thermocouple amplifier breakout works with eight different thermocouple types, has built-in temperature alerts, is compatible with Raspberry Pi, Arduino, and with our no-solder Breakout Garden HAT.
$46.55 AUD, inc GST
Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K
Brand: Adafruit
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. So far Adafruit have carried the very nice MAX31855 which is an SPI interface...
$25.80 AUD, inc GST
Arduino MKR Therm Shield
Brand: Arduino
Your solution for precise and extended range temperature measurements.
$109.95 AUD, inc GST
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (PCC Connector)
Brand: Sparkfun
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature...
$65.55 AUD, inc GST
Similar matches
Ultra Thin 10K Thermistor - B3950 NTC
Brand: Adafruit
Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!
$1.80 AUD, inc GST
Non-contact IR Thermometer Sensor
Brand: DFRobot
We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the sensor reach thermal equilibrium. This can mean longer response times and reading inaccuracies offset by ambient temperature. By contrast, non-contact measurement uses infra-red radiation to measure the temperature and does not require a direct touch. Additionally, this method of measurement can be read quickly and accurately.
$31.54 AUD, inc GST
High Temp Waterproof DS18B20 Digital Temperature Sensor - 3m long
Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet...
$44.80 AUD, inc GST
K Type Thermocouple
Brand: DFRobot
This is a K type Thermocouple (Temperature sensor) which is very popular for 3D printers such as Ultimaker and Makerbot. You can hardly damage them or mishandle them.
$4.65 AUD, inc GST
Thermocouple Type-K - Stainless Steel
Brand: Sparkfun
This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one). Once this is achieved, a voltage potential is formed and current flows. One junction is held in the environment where the temperature of interest exists, this is known as the hot junction. The other junction, referred to as the cold junction, can typically be found in ICs that specialize in reading the temperatures detected by the thermocouple probe.
$18.25 AUD, inc GST
LM35DZ Temperature Sensor
Brand: Core Electronics
Linear analogue output Temperature Sensor.
$2.90 AUD, inc GST
SparkFun Micro Temperature Sensor - STTS22H (Qwiic)
Brand: Sparkfun
Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as ±0.5°C...
$14.60 AUD, inc GST
K-Type Multimeter Temperature Probe
Brand: Core Electronics
Suitable for multimeters with a temperature range.
$16.10 AUD, inc GST
Ultimaker 2 PT100 B Sensor - Glass Fibre
Brand: Ultimaker
Ultimaker 2+ PT100 B Sensor Glass Fibre. (part no 2288) This is the new improved Temperature sensor for the Ultimaker 2+. It does the temperature reading in the hot end.
$45.55 AUD, inc GST
TS01 Non-contact IR Temperature Sensor 4-20mA
Brand: DFRobot
DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface...
$148.74 AUD, inc GST
SparkFun Digital Temperature Sensor Breakout - AS6212 (Qwiic)
Brand: Sparkfun
The AS6212 digital temperature sensor from AMS provides high-accuracy temperature data combined with excellent power consumption on a small Qwiic board...
$18.30 AUD, inc GST
SparkFun CO2 Humidity and Temperature Sensor - SCD40 (Qwiic)
Brand: Sparkfun
The SparkFun CO2 Humidity and Temperature Sensor - SCD40 (Qwiic) features the SCD40 CO2 from Sensirion©...
$164.95 AUD, inc GST
One-Wire Ambient Temperature Sensor - MAX31820
Brand: Sparkfun
The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over...
$9.55 AUD, inc GST
TS01 Non-contact IR Temperature Sensor 0-3V
Brand: DFRobot
DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface...
$148.86 AUD, inc GST
LilyPad Temperature Sensor
Brand: Sparkfun
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical touch based on body heat and ambient conditions with this small sensor.
$9.95 AUD, inc GST
SparkFun Temperature Sensor - STTS22H (Qwiic)
Brand: Sparkfun
Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as ±0.5°C...
$11.70 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.