Search results for: 'tca9548a i2c multiplexer'
TCA9548A I2C Multiplexer
Brand: Adafruit
You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a fixed I2C address...
$13.85 AUD, inc GST
Adafruit PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9548A Compatible
Brand: Adafruit
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three or more of them to...
$12.40 AUD, inc GST
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)
Brand: Sparkfun
Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same bus! The Qwiic Mux Breakout...
$24.95 AUD, inc GST
Analog/Digital MUX Breakout
Brand: Sparkfun
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins!
$10.95 AUD, inc GST
Gravity: Digital 1-to-8 I2C Multiplexer
Brand: DFRobot
On the same I2C port, DFRobot Gravity: I2C Multiplexer solves the address conflict and enables the normal communication with multiple same-address I2C devices. You...
$11.65 AUD, inc GST
Adafruit LTC4316 I2C Address Translator - Stemma QT / Qwiic
Brand: Adafruit
Adafruit has hundreds of designs that use I2C - a two-wire protocol that can let you quickly connect sensors, OLEDs, GPIO expanders, and more. Folks love...
$16.75 AUD, inc GST
Adafruit ADG729 Dual 1-to-4 Analog Matrix Switch
Brand: Adafruit
Analog switches are a solid state alternative to relays, when you want a smaller, lower-power technology that won't wear out mechanically. And, as the...
$18.95 AUD, inc GST
SparkFun Qwiic Multiport
Brand: Adafruit
Qwiic, or STEMMA QT, is a very efficient way to quickly prototype an idea, but a lot of Qwiic/Stemma QT driver boards only have one port, and devices have two ports but that's only good for chaining. This Multiport board allows boards that have only one Stemma QT/Qwiic port to be added to the I2C bus. Or, use this hub to add as many I2C devices to the bus as you need. Complete with mounting holes so the board can be added to any system.
$6.50 AUD, inc GST
Similar matches
Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9546A Compatible
Brand: Adafruit
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three or four of them to...
$7.55 AUD, inc GST
SparkFun Multiplexer Breakout - 8 Channel (74HC4051)
Brand: Sparkfun
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eight LEDs to monitoring eight potentiometers.
$5.95 AUD, inc GST
Pololu Isolated USB-to-I²C Adapter with Isolated Power
Brand: Pololu
This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...
$24.60 AUD, inc GST
Adafruit PCA9546 4-Channel I2C Multiplexer - TCA9546A Compatible
Brand: Adafruit
You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a...
$7.90 AUD, inc GST
I2C Switch
Brand: AB Electronics
The I2C Switch from AB Electronics UK is a 4 channel bidirectional I2C switch controlled via the I2C-bus. It is designed for use on all Raspberry Pi models with the 40 pin GPIO connector.
$21.20 AUD, inc GST
16 Channel Multiplexer
Brand: Sparkfun
Texas Instruments CD74HC4067 16-Channel multiplexer. What can you do with it? How about taking an analog to digital reading from 16 devices with only 1 ADC channel and 4 control pins. That’s right, 16 for the price of 5! 24-Pin SSOP package. Works great with our 28-Pin SSOP to DIP adapters.
$1.75 AUD, inc GST
I2C Breakout Shield
Brand: Unexpected Maker
I2C Breakout shield for the TinyPICO & TinyS2...
$11.74 AUD, inc GST
TPS2113A Power Multiplexer Carrier with USB Micro-B Connector
Brand: Pololu
This breakout board for Texas Instruments’s TPS2113A autoswitching power multiplexer allows you to select which of two power sources is connected to a load while blocking reverse current into either of the sources. It has an adjustable current limit that can be set as high as 2 A and an adjustable switching threshold. Each input power rail on the multiplexer can be supplied with 2.8 V to 5.5 V, and the board also breaks out a USB Micro-B connector that can be used to supply one of the rails.
$16.70 AUD, inc GST
Pololu I²C Isolator with Connectors, ISO1640
Brand: Pololu
This module enables galvanically isolated bidirectional I²C communication between two devices. The bidirectionality applies to both SDA and SCL, which...
$9.70 AUD, inc GST
Pololu Isolated USB-to-I²C Adapter
Brand: Pololu
This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...
$19.45 AUD, inc GST
Pololu I²C Isolator with Isolated Power and Connectors, ISO1640, MIE1W0505BGLVH, 5V/3.3V, 200mA
Brand: Pololu
This module enables galvanically isolated bidirectional I²C communication between two devices while supplying regulated, isolated power to the target. The...
$16.70 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.