Search results for: 'stackable header pins 2.54mm'

Perfect for prototyping, the stacking header lets your signal and power flow through your project, grab a few and put your ideas to the test!

This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1".

This stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. The extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+.

This is a 6-pin female header, with extra long legs – great for stacking Arduino shields.

This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.

This is a simple 3 pin female PTH header. This header is in a configuration that makes it ideal to be used with the MyoWare Muscle Sensor line. Each pin has a spacing of 0.1" in between each other.

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral...

These stackable headers are made to work with the SparkFun Qwiic Shield for Arduino Nano or any comparable shield to connect the shield with a Arduino Nano footprint...

These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint.

This is a 10-pin female header, with extra long legs – great for stacking R3-compatible Arduino shields!

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields.

This pack included 41 units of most commonly used Pin-headers. They are very suitable for your project on breadboard/protoborad, take few back and enjoy...

This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...

The IO Pi Plus is a 32 channel digital expansion board designed for use on the Raspberry Pi. The board is based around the MCP23017 16-bit I/O expander from Microchip Technology Inc. A pair of MCP23017 expanders are included on the board allowing you to connect up to 32 digital inputs or outputs to the Raspberry Pi. The IO Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the IO Pi Plus along with other expansion boards.

This is a 2x23 pin female PTH header, with extra long legs which makes great for stacking. This piece is in the common configuration for Beaglebone Black headers. Each pin has a spacing of 0.1" in between each other.

This is an 8-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1".

This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...

This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...

These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon...

This stackable 38-pin female header features two rows of 19 pins spaced with a 0.1" (2.54 mm) pitch. The extended pins allow multiple units to be stacked...

This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...

Xbee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions.

The Serial Pi Plus is a communication board supporting the RS232 serial protocol.

These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...

These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...

Perfect for prototyping, these straight male headers are a super common header type so grab a few and put your ideas to the test!

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!