Search results for: 'sparkfun mp3 player'
SparkFun Serial MP3 Player Shield - MY1690X-16S (Qwiic)
Brand: SparkFun
The SparkFun MY1690X Serial MP3 Player Shield is an awesome decoder that can store music files onto a standard microSD card, allowing you to add music or...
$29.05 AUD, inc GST
SparkFun MP3 Player Shield
Brand: SparkFun
The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.
$66.65 AUD, inc GST
SparkFun Audio Player Breakout - MY1690X-16S
Brand: SparkFun
The SparkFun M71690X-16S Audio Player Breakout is a compact serial-controlled audio player designed around the MY1690X-16S decoder that supports both .WAV...
$26.60 AUD, inc GST
LilyPad MP3
Brand: SparkFun
The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier. Part of the Lilypad E-textiles line, this board can be used to give your fabric creations the gift of music, or any other sounds you can put on a micro-SD card.
$92.20 AUD, inc GST
Thin Speaker - 0.5W
Brand: SparkFun
If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.5W, 8Ohm speaker is only 40mm in diameter and...
$2.65 AUD, inc GST
SparkFun I2S Audio Breakout - MAX98357A
Brand: SparkFun
The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S (not be confused with I2C) audio to an analog signal...
$12.30 AUD, inc GST
WAV Trigger
Brand: SparkFun
The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can play and mix up to 14 stereo tracks simultaneously and independently, with very low latency. Tracks can be controlled via 16 programmable trigger inputs, or by using a native serial control protocol or even MIDI.
$104.95 AUD, inc GST
SparkFun Qwiic WAV Trigger Pro
Brand: SparkFun
The Qwiic WAV Trigger Pro is the latest evolution of high-fidelity polyphonic audio players. The WAV Trigger Pro improves on the previous versions with a...
$119.95 AUD, inc GST
SparkFun Qwiic Speaker Amp
Brand: SparkFun
The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 class-D stereo audio amp...
$29.05 AUD, inc GST
Music Maker FeatherWing w/ Amp - MP3 OGG WAV MIDI Synth Player - Stereo 3W Amplifier
Brand: Adafruit
Bend all audio files to your will with the Adafruit Music Maker FeatherWing + Amplifier! It's a fun-size version of Adafruit's Music Maker shield for Arduino, and similar...
$43.15 AUD, inc GST
Bluetooth Audio Receiver and Playback Module (Bluetooth 4.0)
Brand: DFRobot
This Bluetooth Audio receiver module includes a USB port and TF card slot. With a pre-amp output, you can drive headphones or a 3W speaker directly. You can also add an active power amplifier and connect a loudspeaker. The module supports MP3, WMA, WAV and lossless FLAC audio formats.
$23.72 AUD, inc GST
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger 16MB Flash
Brand: Adafruit
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want...
$34.55 AUD, inc GST
Adafruit Music Maker FeatherWing - MP3 OGG WAV MIDI Synth Player
Brand: Adafruit
Bend all audio files to your will with the Adafruit Music Maker FeatherWing! It's a fun-size version of Adafruit's Music Maker shield for Arduino! This powerful shield...
$34.60 AUD, inc GST
Voice Prompt Module with Integrated MP3 Player and Speaker
Brand: DFRobot
The voice prompt module with an integrated MP3 player and speaker. Ideal for car navigation, public transport, security alerts, this module supports MP3,...
$13.95 AUD, inc GST
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record - v4
Brand: Adafruit
This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis...
$43.40 AUD, inc GST
Speaker - 0.5W (8 ohm)
Brand: SparkFun
A small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.
$7.35 AUD, inc GST
Mini Speaker - 1W, 8 Ohm
Brand: SparkFun
This 1W, 8 Ohm speaker is only 20mm in diameter and is 4mm thick...
$2.20 AUD, inc GST
SparkFun Qwiic Speaker Kit
Brand: SparkFun
The SparkFun Qwiic Speaker Kit provides you with just what you need to get started with the stereo audio via a simple Qwiic interface!...
$99.95 AUD, inc GST
SparkFun Audio Codec Breakout - WM8960 (Qwiic)
Brand: SparkFun
The SparkFun WM8960 Audio Codec Breakout is a low-power, high-quality stereo codec with 1W Stereo Class D speaker drivers and headphone drivers...
$30.20 AUD, inc GST
Music & sound add-on pack for Arduino - v1.1
Brand: Adafruit
Its a Wave shield party pack! Just add an Arduino to create your own iPod-killer, audio art, sound-effects box... Comes with: Latest Wave shield kit, works with...
$59.15 AUD, inc GST
Grove - MP3 Module V4.0,
Brand: Seeed Studio
Explore the capabilities of the Grove - MP3 Module V4.0, a versatile audio solution supporting MP3, WAV formats, and various storage options like SPI-Flash and TF cards. Dive into seamless audio integration with rich AT command control for your DIY audio projects.
$30.05 AUD, inc GST
Similar matches
DFPlayer - A Mini MP3 Player
Brand: DFRobot
Sing for the moment! The DFPlayer Mini is a small and low cost MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.
$9.34 AUD, inc GST
DFRobot DFPlayer PRO - A MP3 Player
Brand: DFRobot
Here comes the DFPlayer Pro---A mini simple but powerful MP3 Player! This MP3 player module supports four controlling modes: Arduino, AT command, on-board buttons...
$21.49 AUD, inc GST
USB Micro-B Cable - 6"
Brand: SparkFun
This is a USB 2.0 type B to Micro-B 5-pin black cable. You know, the mini-B connector that usually comes with cell phones, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals in projects within a small enclosure is much easier these days, and most times you really don’t need six feet of cable to do that. You can still use this USB cable with our Micro-USB LiPo Charger Basic, Pro Micros, Micro-B USB breakout, or anything else that utilizes a Micro-B connector type!
$5.25 AUD, inc GST
Audio Jack - 1/4" Stereo (right angle)
Brand: SparkFun
This is the kind of ¼" stereo jack you might find in home stereos and PA systems. Switched contacts allow you to detect whether or not there is something plugged in to the jack. The jack can be panel mounted in an 11mm diameter hole.
$2.30 AUD, inc GST
Audio Jack - 3.5mm TRRS (SMD)
Brand: SparkFun
This is a 3.5mm TRRS SMD audio jack. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “tip, ring, ring, sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).
$2.15 AUD, inc GST
Breakout Board for microSD Transflash
Brand: SparkFun
Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.
$9.90 AUD, inc GST
USB Mini-B SMD Connector
Brand: SparkFun
USB Type ‘Mini-B’ Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/disk readers, USB hubs, pretty much anything small and USB.
$3.30 AUD, inc GST
USB Mini-B Cable - 6"
Brand: SparkFun
This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals in projects within a small enclosure is much easier these days, and most times you really don’t need six feet of cable to do that. You can still use this USB cable with our SparkFun RedBoards, FTDI Basics, ProtoSnap, or anything else that utilizes a Mini-B connector type!
$4.95 AUD, inc GST
Si4703 FM Tuner Basic Breakout
Brand: SparkFun
This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than our FM Tuner Evaluation Board. If your project already has an amp and just needs a full-featured FM tuner, this is the board for you. Beyond being a simple FM radio, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and Radio Broadcast Data Service (RBDS) information. The Si4703 even does a very good job of filtering and carrier detection. It also enables data such as the station ID and song name to be displayed to the user.
$23.20 AUD, inc GST
Audio Cable TRS - 1m
Brand: SparkFun
This cable has a standard TRS 3.5mm plug on both ends allowing for easy connections to any 3.5mm jack...
$5.95 AUD, inc GST
Spectrum Shield
Brand: SparkFun
The Spectrum Shield enables your Arduino with the capability of splitting a stereo audio input into 7-bands per channel. You can then read the amplitude of each channel using the ADC on your Arduino allowing you to control everything from LEDs to motors, pumps to relays, or even fire, all with sound. With this shield you will be able to have almost any project be able to react to music or sound!
$51.90 AUD, inc GST
LilyPad Buzzer
Brand: SparkFun
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
$8.85 AUD, inc GST
WVR Audio Development Board
Brand: SparkFun
WVR features 8GB of memory and an advanced Web GUI where users upload audio and manage configuration and firmware...
$99.50 AUD, inc GST
MP3 Trigger
Brand: SparkFun
Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control. MP3s are stored on FAT16 formatted SDSC or FAT32 formatted SDHC micro-SD flash memory cards. In addition, optimized code can achieve 192Kbps stereo playback from a wider range of cards.
$99.70 AUD, inc GST
Adafruit Music Maker MP3 Shield for Arduino w/3W Stereo Amp - v1.0
Brand: Adafruit
Bend all audio files to your will with the Adafruit Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decoding (codec) chip that...
$60.95 AUD, inc GST
Adafruit Music Maker MP3 Shield for Arduino (MP3/Ogg/WAV...)
Brand: Adafruit
Bend all audio files to your will with the Adafruit Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decoding (codec) chip that...
$52.50 AUD, inc GST
MP3 Trigger V24
Brand: Pololu
Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easy. The board has 18 external trigger pins that...
$98.65 AUD, inc GST
littleBits MP3 Player
Brand: LittleBits
This mp3 Player allows you to play your very own mp3 files using littleBits.
$106.99 AUD, inc GST $109.95
Audio Jack Breakout
Brand: SparkFun
Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.
$2.60 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.