

A classic 0.1" | 2.54mm pitch 40-pin header row, with right-angle mounting for the edge of your board.












This long row of headers has you covered when you have an "unconventional" free 40-pins on the edge of your PCB to interface or prototype with.


Got two 0.1" seperated points on the edge of a board you need to connect to easily and permanently? In that case, there aren't many more simple options than a female header such as this.

For four pin positions you require a four pin header for, this ought to do the trick.

For six pins you need to interface to at a right angle, these headers would be an easy option.

If you've got exactly twenty positions for pins on the edge of your board you want some female headers on to interface with, these headers have you covered.

These are the headers to use when you need a full twelve pins on the edge of your board connected to from the side.


If you need ten points connected to on the edge of a board to connect to inline with the surface of the PCB, these headers should do the trick.









If stacking your boards too high is an issue check out this range of low-profile headers!



Need a simple three pin connection parallel to your board? There are not many easier options than a female header such as this.


If stacking your boards too high is an issue check out this range of low-profile headers!

Need a customisable connector for random projects?


A header for twelve points on a PCB in a row that you want to connect to.

Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.
Makers love reviews as much as you do, please follow this link to review the products you have purchased.