Search results for: 'right angle header strip'

A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

This 2x20-pin strip, right-angle female header is a perfect companion piece to Adafruit's 2x20-pin Dual Male Header. It's a great way to add right-angle capability to a 2x20 pin circuit board either by attaching the right-angle male headers to the board and having a right-angle female header or connecting the female header to Adafruit's 2x20 Dual Male headers.

This connector is a single-row, 6-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

Socket (female) header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards or PCBs to allow 22AWG wire or male...

This connector is a single-row, 9-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a double-row, 40-pin, right-angle male header strip that can be cut or broken into smaller strips...

This connector is a single-row, 8-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 40-pin, right-angle male header strip that can be broken into smaller strips and is great for low-profile connections.

This connector is a 50-pack of 1×4-pin, right-angle male header strips. The strips have a standard-color (black) plastic base...

This connector is a single-row, 4-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 12-pin, right-angle female header strip designed to match 0.1" male headers.

This connector is a single-row, 3-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of five.

This connector is a single-row, 2-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of five.

This connector is a single-row, 5-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

This connector is a single-row, 7-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your every-day...

This connector is a triple-row, 40-pin, right-angle male header strip that can be cut or broken into smaller strips...

This compact (0.32"×0.515") switching step-up (or boost) voltage regulator efficiently generates 5 V from input voltages as low as 1.3 V and handles...

This accessory makes wiring up sensors to your Bus Pirate 5 "a snap", with snap-open quick connects that plug into the BP5s header port....

This connector is a single-row, 6-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

1 Typical continuous output current at 30 V in and 9 V out. Actual achievable continuous output current is a function of input and output voltages and is...

Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your everyday...

This connector is a double-row, 34-pin (2×17), straight female header strip designed to match 0.1" male headers.

This carrier for ST’s LPS22DF digital barometer measures pressures from 260 mbar to 1260 mbar (26 kPa to 126 kPa) with absolute accuracy down to ±0.5 mbar...

1 Typical continuous output current at 30 V in and 9 V out. Actual achievable continuous output current is a function of input and output voltages and is...

This reflectance sensor module is designed for use with the Zumo shield for Arduino. It has six IR LED/phototransistor pairs that can be used for line following or edge detection; each sensor provides an independent, digital I/O-measurable output. The array draws approximately 40 mA when the emitters are on, and an optional input allows the emitters to be turned off for additional sensing or power-saving options.

1 Typical continuous output current at 30 V in and 3.3 V out. Actual achievable continuous output current is a function of input and output voltages and...

This connector is a single-row, 17-pin, straight female header strip designed to match 0.1" male headers...

This connector is a single-row, 5-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following. The reflectance measurement is output as an analog voltage. This sensor is sold in packs of two units.

This connector is a single-row, 12-pin, straight female header strip designed to match 0.1" male headers.

This connector is a double-row, 26-pin (2×13), straight female header strip designed to match 0.1" male headers.

This connector is a triple-row, 24-pin (3×8), straight female header strip designed to match 0.1" male headers.

The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and...

This module is a carrier/breakout board for the ST LIS3MDL three-axis magnetometer. The sensor provides magnetic field strength measurements with a...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 45 V and efficiently reduces it to 5 V. The board measures...

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on Pololu's compact carrier board, which makes it easy to integrate this great sensor into your project, and is configured for 3V mode.

The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB along with two Omron G5LE-14-DC5 5 V relays, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relays are rated for up to 10 A under most conditions.

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on Pololu's compact carrier board, which makes it easy to integrate this great sensor into your project, and is configured for 5V mode.