Search results for: 'resistor packs'

1K1 1/2W - Same size as standard 1/4W carbon film.

5K6 1/2W - Same size as standard 1/4W carbon film.

75R 1/2W - Same size as standard 1/4W carbon film.

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack contains 20x 5mm LEDs in four different colors. There...

2K4 1/2W - Same size as standard 1/4W carbon film.

Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1, 2, 4, 8, and 16 Ohms. These resistors are capable of dissipating large amounts of power without damaging themselves. This kit is perfect for testing projects that require large amounts of power while only requiring low resistance.

This is a pack of 600 resistors, all 1%, 1/4 Watt with markings on the paper strips for easy identification.

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 blue 5mm LEDs will help alleviate any frustrations...

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 yellow 5mm LEDs will help alleviate any frustrations...

OMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 1.0KO Resistors...

0.25W Metal Film Resistor 1% Tolerance. 50ppm temperature coefficient. Pack of 8

OMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 100O Resistors...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones).

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 330 ohm resistors make...

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make...

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make...

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make...

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make...

This assortment of through-hole Resistors comes jam-packed with 500 separate resistors, broken down into 20 of the most common resistance values you'll ever need. The folded sleeve packaging offers a awesome way to keep your collection organised over the course of many projects.

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to Adafruit's popular Flora NeoPixel, they only show a single color...

These premium wires are stranded 22AWG wires with female terminals on one end and male terminals on the other end. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. The assortment of 36" (90 cm) wires includes two each of ten different colors.

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to...

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1"...

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to...

Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got...

These premium wires are stranded 22AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 3 ft (90 cm) wires have red insulation and ship in packs of 5.

These non-flexible LED filaments are often seen in 'Edison-like' LED bulbs, arranged in different patterns to give a bright warm lighting effect....

These premium jumper wires are stranded 26 awg wires with male terminations on both ends, for use with 0.1" (2.54 mm) male headers. These 6" (15 cm) wires have green insulation and ship in packs of 10.

These premium wires are stranded 26 AWG wires with male terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1"...

These premium jumper wires are stranded 26 awg wires with male terminations on both ends, for use with 0.1" (2.54 mm) male headers. These 6" (15 cm) wires have brown insulation and ship in packs of 10.

Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got...

The MonkMakes Servo for micro:bit board provides a really easy way to attach up to three servomotors to a BBC micro:bit.

The LT3652 is a complete monolithic step-down battery charger that operates over a 4.95V to 32V input voltage range. The LT3652 provides a...

Used for wiring heating elements etc. 80% nickel, 20% chromium.

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to...

These premium jumper wires are stranded 26 AWG wires with female terminations on both ends, for use with 0.1" (2.54 mm) male headers and connectors. These...