Search results for: 'qwiic grove adapter'

50 results

Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long

Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one end, and...
$3.85 AUD, inc GST

Qwiic Cable - Grove Adapter (150mm)

Brand: SparkFun
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that...
$4.15 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with...
$1.95 AUD, inc GST

Flexible Qwiic Cable - Female Jumper (4-pin)

Brand: SparkFun
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is...
$3.30 AUD, inc GST

Seeed Grove - 4 pin Female Jumper to Grove 4 pin Conversion Cable - 5 Pack

Brand: Seeed Studio
4 pin Female Jumper to Grove 4 pin Conversion Cable is being made available based on requests from customers to use Grove modules directly with Arduino...
$8.25 AUD, inc GST

PiicoDev Adapter for Micro:bit

Brand: PiicoDev
Connect your Micro:bit with the outside world using PiicoDev® Adapter for Micro:bit. With this adapter you can experiment with sensors from the PiicoDev range giving your Micro:bit new sensing abilities.
$13.20 AUD, inc GST

Grove Cable Pigtail - 2mm pitch 100mm long

Brand: Adafruit
If you'd like to make a connection to a board or breakout with Seeed Grove connection, this 100mm long 4-wire cable is fitted with a Grove connector...
$1.90 AUD, inc GST

Flexible Qwiic to STEMMA Cable - 500mm

Brand: SparkFun
The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based STEMMA boards from Adafruit...
$5.95 AUD, inc GST

5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long

Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT 4-pin JST SH on one end, and Arduino MKR...
$2.85 AUD, inc GST

JST-SH 4-pin Cable with Micro SMT Test Hooks - STEMMA QT / Qwiic

Brand: Adafruit
This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.
$5.70 AUD, inc GST

JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic

Brand: Adafruit
This cable will make it super easy to use Adafruit's plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector...
$6.15 AUD, inc GST

Arduino MKR Connector Carrier (Grove Compatible)

Brand: Arduino
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR boards and a Grove ecosystem.
$38.30 AUD, inc GST
Similar matches

STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long

Brand: Adafruit
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...
$1.85 AUD, inc GST

PiicoDev Adapter for Breadboards

Brand: PiicoDev
The PiicoDev® Adapter for Breadboards allows you to break-out the 4-wires in a PiicoDev cable for prototyping on a breadboard.
$1.65 AUD, inc GST

JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...
$1.95 AUD, inc GST

JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long

Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch...
$1.90 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long

Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST

Adafruit Qwiic / Stemma QT 5 Port Hub

Brand: Adafruit
Qwiic, or STEMMA QT, is a very efficient way to quickly prototype an idea, but a lot of Qwiic/Stemma QT driver boards only have one port, and devices have...
$4.95 AUD, inc GST

Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)

Brand: Seeed Studio
Grove is a convenient plug-and-play system with the specialized interface, but that doesn't mean it couldn't be used in an open ecosystem like a breadboard
$5.90 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long

Brand: Adafruit
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$3.25 AUD, inc GST

Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9546A Compatible

Brand: Adafruit
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three or four of them to...
$7.55 AUD, inc GST

4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm long

Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...
$1.95 AUD, inc GST

Adafruit PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9548A Compatible

Brand: Adafruit
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three or more of them to...
$12.40 AUD, inc GST

SparkFun Qwiic Adapter

Brand: SparkFun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors...
$2.75 AUD, inc GST

Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic

Brand: Adafruit
Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer? Sure you can program an Arduino...
$12.30 AUD, inc GST

SparkFun Qwiic SHIM for Raspberry Pi

Brand: SparkFun
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you...
$3.30 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long

Brand: Adafruit
This 4-wire cable is a little over 300mm / 11.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$2.80 AUD, inc GST

Grove - Universal 4 Pin Buckled 20cm Cable (5 PCs pack) (Seeed Studio)

Brand: Seeed Studio
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards...
$4.70 AUD, inc GST

Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit PCF8574 GPIO Expander Breakout - an affordable 8 channel I2C expander.GPIO expanders work like this:...
$8.95 AUD, inc GST

Grove - I2C Hub (Seeed Studio)

Brand: Seeed Studio
I2C Hub Grove is an extension Grove module for connecting multiply I2C devices to Grove Base Shield. It can use with Universal 4 Pin to X2 4 Pin cable...
$5.75 AUD, inc GST

Adafruit Qwiic / Stemma QT Breakout Board

Brand: Adafruit
We got a request from a customer for a board that makes connecting between a breadboard and Stemma QT or Qwiic components easy, and here's what we...
$3.80 AUD, inc GST

Qwiic JST Connector - SMD 4-pin

Brand: SparkFun
Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible...
$1.05 AUD, inc GST

Grove - Universal 4 Pin Buckled 50cm Cable (5 PCs Pack) (Seeed Studio)

Brand: Seeed Studio
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards...
$9.90 AUD, inc GST

Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack) (Seeed Studio)

Brand: Seeed Studio
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards...
$6.85 AUD, inc GST

Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up it's sleeve.
$9.70 AUD, inc GST

Grove - PIR Motion Sensor (Seeed Studio)

Brand: Seeed Studio
This is a simple to use PIR motion sensor with Grove compatible interface. Simply connect it to Stem shield and program it, when anyone moves in its detecting...
$15.35 AUD, inc GST

Grove - Universal 4 pin connector (Seeed Studio)

Brand: Seeed Studio
Grove - Universal 4 Pin connector is the white 4-pin buckled connector used on Stem, Twigs and the Grove cables, the pin spacing is 2mm. There are 10 connectors...
$2.10 AUD, inc GST

WisBlock QWIIC Module RAK13009

Brand: RAKwireless

Connect QWIIC, STEMMA QT and PiicoDev modules to WisBlock in a sensor slot using a compact JST-SH interface for flexible IoT prototyping.

$4.95 AUD, inc GST

SparkFun Qwiic MultiPort

Brand: SparkFun
Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to...
$4.30 AUD, inc GST

SparkFun Qwiic Directional Pad

Brand: SparkFun
The SparkFun Qwiic Directional Pad adds a 5-way directional pad to your I2C bus!...
$13.85 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.