Search results for: 'pcie ribbon cable'

39 results

PCIe Flex Cable for NVMe Base and Raspberry Pi 5 – PCIe Pipe - 50mm

Brand: Adafruit
This PCIe Flex Cable gives you a variety of options for connecting and placing your Pimoroni NVMe Base with Raspberry Pi 5. They have a 'one way'...
$4.50 AUD, inc GST

PCIe Flex Cable for NVMe Base and Raspberry Pi 5 (35mm)

Brand: Pimoroni
These cables give you a variety of options for connecting and placing your NVMe Base or NVMe Base Duo...
$1.80 AUD, inc GST

M.2 M Key to PCIe3.0x16 Graphics Card Extension Cable (Compatible with LattePanda Sigma)

Brand: DFRobot
The M.2 M Key to PCIe3.0 x16 graphics card extension cable is designed for LattePanda Sigma SBC. It features bandwidth up to 32G/bps and plug-and-play...
$48.10 AUD, inc GST

M.2 M Key to PCIe4.0x16 Graphics Card Extension Cable (Compatible with LattePanda Sigma)

Brand: DFRobot
The M.2 M Key to PCIe4.0 x16 graphics card Extension Cable is designed for LattePanda Sigma SBC. Features a PCIex16 card slot and up to 64G/bps bandwidth...
$55.90 AUD, inc GST

Raspberry Pi 5 M.2 HAT+

Brand: Raspberry Pi

Connect M.2-format PCIe and NVMe devices to your Raspberry Pi 5 with the M.2 HAT.

$21.29 AUD, inc GST

Argon ONE v3 NVMe PCIe Expansion Board for Raspberry Pi 5

Brand: Argon40

An add-on that replaces the stock standard base that comes with the Argon ONE V3. Allows you to upgrade your Pi with an M.2 NVMe SSD.

$33.30 AUD, inc GST

PCIe Expansion Board For Raspberry Pi 5

Brand: Waveshare
2-Ch PCIe FFC Adapter Board for Raspberry Pi 5, Expands The PCIe Interface Of The Pi 5 To 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs,...
$23.70 AUD, inc GST

PCIe To M.2 Adapter Board (C) for Raspberry Pi 5, Supports M.2 NVMe SSDs

Brand: Waveshare
PCIe To M.2 Adapter Board (C) for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, With Transparent acrylic...
$15.40 AUD, inc GST

52Pi B14 Quad FPC PCIe HAT for Raspberry Pi 5

Brand: Core Electronics

Expand a Pi 5's FPC PCIe into four ports with a daisy-chainable PCIe switch, enabling multiple SSDs, GPUs or network interfaces with included FPC ribbon cables.

$63.10 AUD, inc GST
Similar matches

Jumper Wire 20cm Ribbon (M/F, 40pcs)

Brand: Core Electronics
Jump between male pins and breadboards easily with our 20cm ribbon jumper wires! Available in multiple colors, pre-terminated male to female, and can be unzipped to organize signals. Perfect for prototyping. Get 40 pcs in each pack.
$3.95 AUD, inc GST

Jumper Wire 20cm Ribbon (F/F, 40pcs)

Brand: Core Electronics
Jumpstart your electronics project with a pack of 40, 20cm female-to-female jumper wires. Pre-terminated with an assortment of colors, these 30 AWG wires are perfect for prototyping and connecting between male pins.
$3.95 AUD, inc GST

Jumper Wire 20cm Ribbon (M/M, 40pcs)

Brand: Core Electronics

Jumpstart your electronics project with a pack of 40, 20cm male-to-male jumper wires. Pre-terminated with an assortment of colors, these 30 AWG wires are perfect for prototyping and connecting between breadboards and female headers.

$3.95 AUD, inc GST

Argon NEO PCIe Expansion Board for Raspberry Pi 5

Brand: Argon40

Level up your Argon NEO with an NVMe SSD, boot quicker or just add more storage - the option is yours!

$33.30 AUD, inc GST

Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)

Brand: Seeed Studio
Grove is a convenient plug-and-play system with the specialized interface, but that doesn't mean it couldn't be used in an open ecosystem like a breadboard
$5.90 AUD, inc GST

Ribbon Cable - 10 wire (3ft/90cm)

Brand: Sparkfun
Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.
$3.25 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 10cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 10 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

1.25mm Pitch 8-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible

Brand: Adafruit
These solid 1.25mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and...
$2.65 AUD, inc GST

Raspberry Pi Display FPC Adapter Cable 500mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current DSI-connected display products.

$5.38 AUD, inc GST

Ribbon Cable - 10 wire (15ft/4.5m)

Brand: Sparkfun
Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.
$14.20 AUD, inc GST

40-pin FPC Extension Board + 200mm Cable

Brand: Adafruit
Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board. This 40pin FPC extension board has two 40-pin flex connectors (both are bottom...
$9.10 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 20cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 20 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 5cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 5 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

50-pin 0.5mm Pitch FPC Flex Cable - 250mm / 10 long

Brand: Adafruit
FPC cables are super thin and flexible. They're often used in electronics when a a round cable would be too bulky, especially if you're dealing with 50 contacts...
$3.95 AUD, inc GST

22-Pin 0.5mm Pitch FPC Cable - 10cm

Brand: Sparkfun
A 22-pin, 100mm flat, flexible cable with 0.5mm pitch. These cables are A-B style, so pin one on one side will match with pin one on the other side. Use...
$0.92 AUD, inc GST

40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long

Brand: Adafruit
Use this 25 cm long cable with our 40-pin FPC to 2x20 IDC Plug and Socket adapter PCBs to extend your Raspberry Pi's GPIO capabilities. Note you'll have to keep an eye on where Pin 1 is on the ribbon cable, on the adapter PCBs, and your HAT or Bonnet of choice.
$2.10 AUD, inc GST

24-pin 0.5mm pitch FPC Flex A-B (D) type Cable - 50mm long

Brand: Adafruit
Connect this to that when a 24-pin FPC connector is needed. This 5 cm long cable is made of a flexible PCB. It's A-B style (sometimes referred to as D...
$1.80 AUD, inc GST

PCIex1 to PCIex16 Graphics Card Extension Board (Compatible with LattePanda Sigma)

Brand: DFRobot
The PCIex1 to PCIex16 graphics card Adapter Card features a PCIex16 card slot and high-speed transmission. Offers plug-and-play convenience...
$14.25 AUD, inc GST

USB4 to PCIe 4.0 x16 Thunderbolt 4 eGPU Graphics Card Adapter (Compatible with LattePanda Sigma)

Brand: DFRobot
Boost LattePanda Sigma with the Thunderbolt 4 graphics card expansion dock. Features USB4, PCIe x16, and TBT4 for data transmission at up to 40Gbps....
$284.95 AUD, inc GST

Ribbon Cable with Pre-Crimped Terminals 10-Color M-M 36" (90 cm)

Brand: Pololu
These 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...
$31.95 AUD, inc GST

Ribbon Cable with Pre-Crimped Terminals 10-Color M-F 36" (90 cm)

Brand: Pololu
These 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...
$31.95 AUD, inc GST

Ribbon Cable with Pre-Crimped Terminals 10-Color M-F 60" (150 cm)

Brand: Pololu
These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...
$50.75 AUD, inc GST

Ribbon Cable with Pre-Crimped Terminals 10-Color F-F 60" (150 cm)

Brand: Pololu
These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1"...
$50.75 AUD, inc GST

Ribbon Cable with Pre-Crimped Terminals 10-Color F-F 36" (90 cm)

Brand: Pololu
These 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1" crimp...
$31.95 AUD, inc GST

26-pin 1mm pitch FPC Flex Cable - 20cm long

Brand: Adafruit
FPC cables are super thin and flexible. They're often used in electronics when a round cable would be too bulky, especially if you're dealing with...
$2.05 AUD, inc GST

Ribbon Crimp Connector - 10-pin (2x5, Female)

Brand: Sparkfun
These 2x5 crimp connectors can be snapped onto 10-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which makes it easy to add as many mid-cable connectors as you need.
$1.05 AUD, inc GST

10-pin IDC Socket Rainbow Breakout Cable

Brand: Adafruit
We don't really know what to call this thing - it's got a 10 pin IDC cable on one end 6 inches of rainbow ribbon and tipped with 0.1" female socket connectors on...
$7.45 AUD, inc GST

M.2 M Key to PCIex4 Expansion Board (Compatible with LattePanda Sigma)

Brand: DFRobot
The M.2 M Key to 4-way PCIe graphics card expansion card board is designed for LattePanda Sigma. Features 4 PCI-E interfaces and high-speed transmission...
$33.55 AUD, inc GST

Downgrade GPIO Ribbon Cable for Pi A+/B+/Pi 2/Pi 3 - 40p to 26p

Brand: Adafruit
Oof - you got a Raspberry Pi Model A+ or B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very...
$6.60 AUD, inc GST

Ribbon Crimp Connector - 6-pin (2x3, Female)

Brand: Sparkfun
These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which makes it easy to add as many mid-cable connectors as you need.
$0.88 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.