Search results for: 'nylon filament'

50 results

Bambu Lab Black PAHT-CF with Spool (1kg)

Brand: Bambu Lab

Engineered for high-temperature fixtures and structural parts, this carbon fibre composite delivers exceptional rigidity and thermal stability.

$145.00 AUD, inc GST

Ultimaker Transparent Nylon 750g 3mm

Brand: Ultimaker

Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Designed to resist humidity!

$133.24 AUD, inc GST

Ultimaker Black Nylon 750g 3mm

Brand: Ultimaker

Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Designed to resist humidity!

$133.24 AUD, inc GST

Bambu Lab X2D - AMS Combo

Brand: Bambu Lab

Packing a dual nozzle, temperature-controlled chamber - a flagship machine paired with the AMS 2 Pro Material Manager, to create quicker and easier.

$1349.00 AUD, inc GST

Ultimaker BAM - 750g (Breakaway)

Brand: Ultimaker

Ultimaker Breakaway is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a quality finish on your 3D print. The filament is 3mm in diameter.

$133.24 AUD, inc GST

Bambu Lab P2S - AMS Combo

Brand: Bambu Lab

A range of improvements to a well-loved 3D printing system, the P2S Combo adds print failure detection, improves print quality and the new and improved AMS 2 Pro - for even better filament handling!

$1149.00 AUD, inc GST

Bambu Lab AMS HT - Filament Dryer and Manager

Brand: Bambu Lab

Eliminate moisture-related problems. An active dryer and manager that can heat up to 85°C, and automatically load and feed filament directly to your printer.

$236.58 AUD, inc GST

Magigoo Pro PA

Brand: Magigoo
Magigoo Pro PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
$53.80 AUD, inc GST

Bostik BLU Glue Stick 35g (alternative to Elmers Disappearing Purple)

Brand: Core Electronics
If you're looking to partake in some large 3D Prints, whatever your print surface might be, a good quality Glue stick can be the defining difference between failed and fantastic prints!
$6.25 AUD, inc GST

Bambu Lab AMS 2 Pro - 4 Roll Filament Dryer and Manager

Brand: Bambu Lab

Enable multi-material printing, with filament drying, loading and recognition, making 3D printing all the more easy.

$529.00 AUD, inc GST

Ultimaker 2 Olsson Ruby 2.85mm 0.6 Nozzle

Brand: Ultimaker
Experience high-quality 3D printing with the Ultimaker 2 Olsson Ruby 0.6 nozzle. Its aluminum oxide ruby tip allows for successful printing of toughest materials like carbon fiber, tungsten and more. German precision and Swedish workmanship guarantee optimal performance, offering excellent heat conductivity and throughput. Perfect for professional 3D printing enthusiasts.
$167.93 AUD, inc GST

UltiMaker S6 3D Printer

Brand: Ultimaker

UltiMakers upgrade to the world-renowned S5, with the speed of the S8 and a range of other features to accelerate prototyping.

$14800.87 AUD, inc GST

Ultimaker 0.4mm Print Core BB for S Series (Support Material)

Brand: Ultimaker
Professional 3D printing just got more accessible. Maximize the print performance and machine uptime with our swappable, material-matching print cores. Make the most out of reliable build and support material combinations for geometric freedom or print in dual colour.
$215.41 AUD, inc GST

Ultimaker PVA - 350g

Brand: Ultimaker
PVA (polyvinyl alcohol) is a water-soluble support material for multi-extrusion 3D printing.
$103.60 AUD, inc GST

Ultimaker PVA - 750g

Brand: Ultimaker
PVA (polyvinyl alcohol) is a water-soluble support material for multi-extrusion 3D printing.
$192.50 AUD, inc GST

Ultimaker 2 Olsson Ruby 1.75mm 0.6 Nozzle

Brand: Ultimaker
One nozzle to rule them all, the Olsson Ruby will work with a huge range of materials.
$167.93 AUD, inc GST

Ultimaker 2 Olsson Ruby 1.75mm 0.4mm Nozzle

Brand: Ultimaker
One nozzle to rule them all, the Olsson Ruby will work with a huge range of materials.
$167.93 AUD, inc GST

Bambu Lab X2D - Machine Only

Brand: Bambu Lab

Packing a dual nozzle, temperature-controlled chamber - a flagship machine, with even more features to create quicker and easier.

$1049.00 AUD, inc GST
Similar matches

Bambu Lab Black PLA with Spool (1kg)

Brand: Bambu Lab

Ideal for rapid prototyping and detailed models, this PLA delivers stiff parts with a high-quality finish.

$35.99 AUD, inc GST

Bambu Lab White PLA with Spool (1kg)

Brand: Bambu Lab

Ideal for rapid prototyping and detailed models, this PLA delivers stiff parts with a high-quality finish.

$28.93 AUD, inc GST

Bambu Lab Red PLA with Spool (1kg)

Brand: Bambu Lab

Ideal for rapid prototyping and detailed models, this PLA delivers stiff parts with a high-quality finish.

$35.99 AUD, inc GST

Bambu Lab Cyan PLA with Spool (1kg)

Brand: Bambu Lab

Ideal for rapid prototyping and detailed models, this PLA delivers stiff parts with a high-quality finish.

$35.99 AUD, inc GST

Conductive Nylon Fabric Tape - 8mm Wide x 10 meters long

Brand: Adafruit
With Adafruit's fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This Conductive Nylon tape goes great with Adafruit's other interesting...
$8.95 AUD, inc GST

Bambu Lab Black PLA Refill (1kg)

Brand: Bambu Lab

Ideal for rapid prototyping and detailed models, this PLA delivers stiff parts with a high-quality finish. This is a refill and does not include a spool.

$30.99 AUD, inc GST

Nylon Spacer: 15mm Length, 5mm OD, 3.3mm ID (25-Pack)

Brand: Pololu
Keep your components separated with this 25-pack of 15mm-long (0.59") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
$4.20 AUD, inc GST

PolyLite CosPLA Version B 1.75mm 1kg Filament - Grey

Brand: Core Electronics
Polymaker CosPLA is a special PLA formula designed for cosplay props application. It has been enhanced for ease of sanding, durability and paint-ability....
$39.95 AUD, inc GST

PolyLite LW-PLA White 1.75mm 800g Spool

Brand: Core Electronics
PolyLite™ LW-PLA is a special foamed PLA filament designed to print with similar settings as regular PLA but with half the weight (0.6g/cm3). Its low...
$54.95 AUD, inc GST

Nylon Spacer: 6mm Length, 4mm OD, 2.7mm ID (50-Pack)

Brand: Pololu
Keep your components separated with this 50-pack of 6mm-long (0.24") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
$5.65 AUD, inc GST

Nylon Spacer: 10mm Length, 4mm OD, 2.7mm ID (25-Pack)

Brand: Pololu
Keep your components separated with this 25-pack of 10mm-long (0.39") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
$4.40 AUD, inc GST

Bambu Lab Grass Green Matte PLA with Spool (1kg)

Brand: Bambu Lab

Display models, decorative prints, and prototypes are perfect applications for PLA Matte. Delivering easy-to-print parts with an elegant low-sheen matte finish.

$35.99 AUD, inc GST

Bambu Lab Charcoal Matte PLA with Spool (1kg)

Brand: Bambu Lab

Display models, decorative prints, and prototypes are perfect applications for PLA Matte. Delivering easy-to-print parts with an elegant low-sheen matte finish.

$35.99 AUD, inc GST

Polymaker PolyTerra Matte Gradient / Rainbow PLA 1kg

Brand: Core Electronics
Only available in 1.75mm Filament PolyTerra™ Gradient Matte PLA delivers a smooth matte surface finish, stunning rainbow gradient and is manufactured with...
$48.70 AUD, inc GST

Bambu Lab Dark Green Matte PLA with Spool (1kg)

Brand: Bambu Lab

Display models, decorative prints, and prototypes are perfect applications for PLA Matte. Delivering easy-to-print parts with an elegant low-sheen matte finish.

$35.99 AUD, inc GST

Bambu Lab Magenta PLA with Spool (1kg)

Brand: Bambu Lab

Ideal for rapid prototyping and detailed models, this PLA delivers stiff parts with a high-quality finish.

$35.99 AUD, inc GST

Conductive Nylon Fabric Tape - 5mm Wide x 10 meters long

Brand: Adafruit
With Adafruit's fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This Conductive Nylon tape goes great with Adafruit's other interesting...
$6.30 AUD, inc GST

Bambu Lab Scarlet Red Matte PLA with Spool (1kg)

Brand: Bambu Lab

Display models, decorative prints, and prototypes are perfect applications for PLA Matte. Delivering easy-to-print parts with an elegant low-sheen matte finish.

$35.99 AUD, inc GST

Nylon Spacer: 8mm Length, 5mm OD, 3.3mm ID (50-Pack)

Brand: Pololu
Keep your components separated with this 50-pack of 8mm-long (0.32") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
$5.65 AUD, inc GST

Nylon Spacer: 2mm Length, 4mm OD, 2.7mm ID (50-Pack)

Brand: Pololu
Keep your components separated with this 50-pack of 2mm-long (0.08") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
$5.65 AUD, inc GST

Polymaker PolyDissolve S1 0.75Kg 3mm

Brand: Polymaker
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
$96.95 AUD, inc GST

Polymaker PolyLite Blue PLA Filament 1KG 1.75mm

Brand: Polymaker
PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyLite™ PLA is a high-quality PLA designed for reliability and ease of printing.
$36.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.