Search results for: &#039;microchip&#039;

CircuitBrains Deluxe is the smallest solderer-able ATSAMD51 module . Skip on all the tedious work of adding a powerful Cortex M4 32-bit microcontroller to your next project. Null Byte Labs has taken care of the tough work of pin mappings, power & decoupling layout, clock, flash, assembly, bootloader, and firmware. All you need to do is drop a footprint into your next PCB design project, connect your peripherals and USB connector, then solder it on.. BAM! You can start writing your code and designing with half the work.

$63.40 AUD, inc GST

Out of stock

Similar matches

Electronics Prototyping Kit

Solderless prototyping kit with a breadboard 3.3V/5V power module, 830-point breadboard, jumpers and common IC's for rapid bench testing and classroom labs - just BYO development board!

$29.05 AUD, inc GST

Arduino Nano Every

Turn your ideas into a reality quickly with the new Arduino Nano Every.

$22.20 AUD, inc GST

RFID/NFC Tag Adhesive (NTAG213 Chip, 13.56MHz)

One circular adhesive NFC tag, perfect for low profile applications.

$1.55 AUD, inc GST

RFID/NFC Tag Credit Card-Sized (NTAG213 Chip, 13.56MHz)

Enhance your DIY projects with this credit card-sized RFID/NFC tag featuring an NTAG213 chip. Perfect for creating access control systems, tracking tools, and contactless vending machines. Compatible with almost any 13.56MHz RFID/NFC reader. Carry it in your wallet for convenience.

$1.70 AUD, inc GST

The micro:bit V2 has been designed from the ground up with education in mind. There are many onboard sensors and actuators, enabling exciting educational experiences with coding and electronics.

micro:bit V2.2 Board

Brand: micro:bit

$24.15 AUD, inc GST

RFID/NFC Tag 25mm Coin (NTAG213 Chip, 13.56MHz)

One coin-sized NFC tag, ideal for embedding in your project.

$1.45 AUD, inc GST

Arduino Nano 33 IoT with headers

An IoT connected IMU sensor in the Nano form factor.

$43.30 AUD, inc GST

The Kitronik Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor moisture present in soil.

Kitronik Prong Soil Moisture Sensor for BBC micro:bit

Brand: Kitronik

$7.80 AUD, inc GST

Arduino Micro

The Arduino Micro is a small version of the Arduino Leonardo with two more analog inputs and a breadboard-friendly form factor

$41.70 AUD, inc GST

ENC28J60 Ethernet LAN Network Module

Microchip ENC28J60 controller with SPI interface ready to prototype with.

$8.55 AUD, inc GST

SparkFun Cryptographic Co-Processor Breakout - ATECC608A (Qwiic)

The SparkFun ATECC608A Cryptographic Co-processor Breakout allows you to add strong security to your IoT node, edge device, or embedded system. This includes asymmetric...

$8.60 AUD, inc GST

Adafruit ATECC608 Breakout Board - STEMMA QT / Qwiic

You've got secrets, and you want to keep them safe? Most microcontrollers are not designed to protect against snoopers, but a crypto-authentication chip can be used...

$8.80 AUD, inc GST

The ADC Pi is an 8 channel 17 bit analogue to digital converter designed to work with the Raspberry Pi. The ADC Pi is based on two Microchip MCP3424 A/D converters each containing 4 analogue inputs. The MCP3424 is a delta-sigma A/D converter with low noise differential inputs.

ADC Pi

Brand: AB Electronics

$41.60 AUD, inc GST

Arduino Nano Matter

The Arduino Nano Matter combines Arduino's user-friendly approach with the powerful MGM240S technology from Silicon Labs.

$39.40 AUD, inc GST

Useful Sensors Tiny Code Reader

The Tiny Code Reader from Useful Sensors is smaller than a quarter, very low cost, and connects through Qwiic...

$15.30 AUD, inc GST

ADC Differential Pi

Brand: AB Electronics

$38.95 AUD, inc GST

Pro Micro - 3.3V/8MHz

Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.

$35.50 AUD, inc GST

52Pi Raspberry Pi Pico MicroPython Sensor Kit (Pico Included)

Brand: 52Pi

Over twenty sensors, displays and actuators on one breadboard - go from first blink to a working project without buying another module.

$112.22 AUD, inc GST

Based on Planet X sensors, Nezha Inventor’s Kit is designed for BBC micro:bit. It contains multiple sensors and modules including LED, trimpot, soil moisture sensor, ultrasonic sensor, crash sensor, line-tracking sensor, etc., and also with over 400 pieces of bricks

Nezha Inventor's Kit for micro:bit (36-in-1)

Brand: Elecfreaks

$242.46 AUD, inc GST

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit.

Pimoroni enviro:bit for micro:bit

Brand: Pimoroni

$54.70 AUD, inc GST

Out of stock

The ADC-DAC Pi Zero is a 2 channel 12 bit analogue to digital converter and 2 channel 12 bit digital to analogue converter designed to work with the Raspberry Pi. Designed for the same footprint as the Raspberry Pi Zero the ADC-DAC Pi Zero is also compatible with full size Raspberry Pi models.

ADC-DAC Pi Zero

Brand: AB Electronics

$28.80 AUD, inc GST

Explore smart home automation with the ELECFREAKS micro:bit Smart Life Kit, featuring integrated sensors for water, light, smoke, temperature, and humidity monitoring, plus servo motors and relays for hands-on STEM learning projects.

micro:bit Smart Home Sensor Kit by ELECFREAKS

Brand: Elecfreaks

$118.65 AUD, inc GST

The Pololu 3pi+ 32U4 OLED robot is a complete, high-performance mobile platform based on the Arduino-compatible ATmega32U4 MCU, and this kit contains all...

3pi+ 32U4 OLED Robot Kit with 15:1 HPCB Motors (Hyper Edition Kit)

Brand: Pololu

$314.95 AUD, inc GST

The DFRobot 3D gesture sensor is an interactive sensor that integrates 3D gesture recognition and motion tracking. This sensor can be used to detect clockwise/counterclockwise rotation and movement directions.

3D Gesture Sensor (Mini) For Arduino

Brand: DFRobot

$51.12 AUD, inc GST

Tiny Code Reader from Useful Sensors

The Tiny Code Reader from Useful Sensors is a small, low-cost hardware module that reads QR codes. It's designed to be a simple way to provision a...

$15.15 AUD, inc GST

Adafruit Grand Central M4 Express featuring the SAMD51

Are you ready? Really ready? Cause here comes the Adafruit Grand Central featuring the Microchip ATSAMD51. This dev board is so big, it's not named after a Metro train, it's a whole freakin' station!

$70.20 AUD, inc GST

CAN-BUS Shield

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. It uses the Microchip MCP2515 CAN controller with the MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module. These features make this shield ideal for data logging application.

$62.60 AUD, inc GST

Arduino Uno WiFi Rev2

Using a brand new 8-bit microprocessor from Microchip for the first time on an Arduino board. Explore the possibilities with the onboard IMU (Inertial Measurement Unit). Connect the board to your Wi-Fi network in a secure manner using the new ECC608 crypto chip accelerator.

$94.60 AUD, inc GST

Seeed Wio Terminal

Brand: Seeed Studio

Wio (Wireless input output) Terminal is more of a complete system equipped with Screen + Development Board + Input/Output Interface + Enclosure, making it an efficient and Product-Ready Product. Compatible with Arduino and MicroPython!

$71.90 AUD, inc GST