Search results for: 'male header pins'

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

Perfect for prototyping, these straight male headers are a super common header type so grab a few and put your ideas to the test!

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or general custom headers.

This connector is a single-row, 40-pin, right-angle male header strip that can be broken into smaller strips and is great for low-profile connections.

This connector is a single-row, 40-pin, straight male header strip that can be broken into smaller strips. Both sides of the strip are long, allowing for unique connections that cannot be made with standard male header strips. For example, this header can be used as a female-to-male adapter, and both sides are compatible with wire wrap.

A row of right angle headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

This connector is a double-row, 80-pin (2×40), straight male header strip that can be broken into smaller strips.

Breakaway header is like the duct tape of electronics, and this header is one better with extra long pins on both sides. This makes it great for connecting things...

Get a precision fit with these lovely machined 'Swiss pin' headers. In this world nothing can be said to be certain, except Adafruit need headers, headers, and more headers!...

Perfect for prototyping, the stacking header lets your signal and power flow through your project, grab a few and put your ideas to the test!

If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each...

If your soldering isn't quite up to scratch, or you yet don't own a soldering iron, then these nifty 0.1"/2.54mm standard pitch press-fit...

This connector is a 25-pack of 1×10-pin, straight male header strips. The strips have a standard-color (black) plastic base...

This is a SMD 4-pin right angle male header. We use this header on our Graphic LCD Serial Backpack.

This connector is a triple-row, 40-pin, right-angle male header strip that can be cut or broken into smaller strips...

Never get frustrated with 2mm-pitch modules again! Each one of these 40-pin break-apart header packs contains 5 pieces of 40-pin, 2mm pitch headers. Great for when...

This connector is a double-row, 40-pin, right-angle male header strip that can be cut or broken into smaller strips...

These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs.

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.

These two Short Male Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and...

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.

This is a SMD 6 pin right angle male header. We use this header on our LilyPad Main Board.

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. Adafruit go through...

In this world nothing can be said to be certain, except Adafruit need headers, headers, and more headers! Each pack contains ten red 36-pin 0.1" pitch break-away male...

This custom connector is a double-row, 14-pin, extended (17.1 mm) male header strip. Pololu use this header to connect the LCD on the 3pi robot to the main PCB.

This custom connector is a 0.1"-pitch, double-row, 14-pin, shortened (8.75 mm) male header strip. We use this header to connect the LCD on the Zumo 32U4...

In this world nothing can be said to be certain, except Adafruit need headers, headers, and more headers! Each pack contains ten white 36-pin 0.1" pitch break-away male...

This connector is a single-row, 40-pin, straight male header strip that can be cut or broken into smaller strips. This strip has a red plastic base,...

This connector is a single-row, 40-pin, straight male header strip that can be cut or broken into smaller strips. This strip has a white plastic base;...

This connector is a 50-pack of 1×4-pin, right-angle male header strips. The strips have a standard-color (black) plastic base...

This connector is a single-row, 40-pin, straight male header strip that can be cut or broken into smaller strips. This strip has a yellow plastic base;...

This custom connector is a double-row, 14-pin, extended (22.85 mm) male header strip. Pololu include this connector with Pololu's 3pi expansion kits for connecting the expansion PCB to the 3pi robot.

This connector is a single-row, 40-pin, straight male header strip that can be cut or broken into smaller strips. This strip has a blue plastic base;...

In this world nothing can be said to be certain, except Adafruit need headers, headers, and more headers! Each pack contains ten 36-pin short break-away male headers...