Search results for: 'm3 nylon standoffs'
M3 Mounting Kit (Standoffs)
Brand: DFRobot
This M3 mounting kit provides you with different types of standoffs with screws and nuts which are most commonly used in DFRobot's projects. We use them to mount circuit boards and help build robots.
$39.74 AUD, inc GST
10 sets M3 * 30 nylon standoffs
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$3.61 AUD, inc GST
10 sets M3 * 10 nylon standoff
Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.37 AUD, inc GST
10 sets M3 * 20 nylon standoffs
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$3.47 AUD, inc GST
Black Nylon Screw and Stand-off Set – M3 Thread
Brand: Adafruit
Totaling 420 pieces, this M3 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end!
$36.20 AUD, inc GST
10 sets M3 * 10 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.
$3.96 AUD, inc GST
White Nylon Screw and Mounting Kit -M2
Brand: DFRobot
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size...
$16.56 AUD, inc GST
10 sets M3 * 20 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$5.16 AUD, inc GST
10 sets M3 * 50 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis.
$7.71 AUD, inc GST
10 sets M3 * 30 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$5.74 AUD, inc GST
SSD Base Enclosure for Argon ONE Cases
Brand: The Pi Hut
This SSD base enclosure for Argon ONE Raspberry Pi cases allows you to fit a 2.5" SSD below your Argon ONE V2/M.2 - a tidy way to add additional fast...
$23.45 AUD, inc GST
Adafruit 4x4 Trellis Feather Acrylic Enclosure + Hardware Kit
Brand: Adafruit
A super-specifically-laser-cut enclosure that turns your 4x4 'Trellis into a handheld light/music maker! Perfect for your next cool interface, MIDI instrument, control...
$33.20 AUD, inc GST
Prototyping Plate (Square)
Brand: DFRobot
This is a really easy use prototyping plate. Basically you can put everything from Arduino board to sensors, even a motor on top of it. It fits M2-M3 screws.
$17.69 AUD, inc GST
Similar matches
Black Nylon Screw and Stand-off Set – M2.5 Thread
Brand: Adafruit
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for...
$35.30 AUD, inc GST
White Nylon Screw and Stand-off Set – M2.5 Thread
Brand: Adafruit
Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs...
$31.40 AUD, inc GST
M2.5 Standoffs for Pi HATs
Brand: Pimoroni
These standoffs are perfect for keeping your HATs off of your Raspberry Pi
$3.95 AUD, inc GST
10 sets M3 * 6 nylon screws
Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.22 AUD, inc GST
Brass M2.5 Standoffs 16mm tall - Black Plated - Pack of 2
Brand: Adafruit
Finally Adafruit get Adafruit's very own super sweet sixteen... 16 millimeters that is! Adafruit's Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT...
$2.95 AUD, inc GST
Nylon Spacer: 10mm Length, 5mm OD, 3.3mm ID (25-Pack)
Brand: Pololu
Keep your components separated with this 25-pack of 10mm-long (0.39") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
$3.95 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 36mm Length) - 4 Pack
Brand: goBilda
A 36mm long aluminium standoff for M4 threaded screws
$7.60 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 30mm Length) - 4 Pack
Brand: goBilda
A 30mm long aluminium standoff for M4 threaded screws
$6.95 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 43mm Length) - 4 Pack
Brand: goBilda
A 43mm long aluminium standoff for M4 threaded screws
$8.45 AUD, inc GST
Standoffs Plastic - (4-40; 3/4"; 10 pack)
Brand: Sparkfun
These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.
$7.65 AUD, inc GST
Aluminum Standoff: 1/4" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.25" (6 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$5.05 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 40mm Length) - 4 Pack
Brand: goBilda
A 40mm long aluminium standoff for M4 threaded screws
$8.10 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 24mm Length) - 4 Pack
Brand: goBilda
A 24mm long aluminium standoff for M4 threaded screws
$6.25 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 18mm Length) - 4 Pack
Brand: goBilda
18mm length standoffs can be used to add structural rigidity between parallel plates, as a dead-axle to run bearings and rotating...
$5.55 AUD, inc GST
1501 Series M4 x 0.7mm Standoff (6mm OD, 34mm Length) - 4 Pack
Brand: goBilda
A 34mm long aluminium standoff for M4 threaded screws
$7.40 AUD, inc GST
Aluminum Standoff: 1/2" Length, 4-40 Thread, F-F (4-Pack)
Brand: Pololu
These 1/2"-long hexagonal female-female aluminum standoffs keep parts spaced 0.5 inches (13 mm) apart. They are like elongated, 3/16″-wide hex nuts, with 4-40 threads running through the entire length of each standoff. They are sold in packs of 4.
$7.20 AUD, inc GST
Aluminum Standoff: 3/4" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.75" (19 mm) apart and are great for building a multi-level robot chassis.Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$5.25 AUD, inc GST
Standoffs Plastic (4-40; 3/8"; 10 pack)
Brand: Sparkfun
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.
$6.40 AUD, inc GST
SMT / Solderable Standoff Nuts - M3 x 6mm - 10 pack
Brand: Adafruit
These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...
$6.10 AUD, inc GST
SMT / Solderable Standoff Nuts - M3 x 3mm - 10 pack
Brand: Adafruit
These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...
$5.70 AUD, inc GST
1513 Series Offset Standoff (4mm Length) - 4 Pack
Brand: goBilda
For those times where it would be helpful to have holes offset 4mm from the original locations. Offset standoffs have three mounting...
$10.10 AUD, inc GST
Aluminum Standoff: 1" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$6.45 AUD, inc GST
Aluminum Standoff: 3/8" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.375" (10 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$5.05 AUD, inc GST
Aluminum Standoff: 1-1/2" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.5" (38 mm) apart and are great for building a multi-level robot chassis. Both ends of...
$8.95 AUD, inc GST
Aluminum Standoff: 1-1/4" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.25" (32 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$8.55 AUD, inc GST
Aluminum Standoff: 1" Length, 4-40 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.
$7.85 AUD, inc GST
Aluminum Standoff: 1/2" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.5" (13 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$4.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.