Search results for: 'lipo battery holder'
Battery Mount (32-1)
Brand: goBILDA
This battery mount kit comes with the necessary hardware to mount a GB-14-0014 or GB-3100-0012-0020 battery to 1120 Series U-Channel or 1121 Series Low-Side U-Channel.
$7.95 AUD, inc GST
Battery Mount for 12V NiMH Nested Battery
Brand: goBILDA
This profile-matched Battery Mount provides a simple, secure way to fasten a 12V NiMH Nested Battery to your robot. Its six...
$30.35 AUD, inc GST
JST-PH 2-Pin SMT Right Angle Connector
Brand: Adafruit
A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of Adafruit's 3.3V Logic Trinket and 5V Logic Trinket!...
$1.45 AUD, inc GST
Similar matches
LiPo Safety Battery Bag (18x23cm)
Brand: Core Electronics
Keep your batteries in a safer place with this LiPo bag
$7.35 AUD, inc GST
Battery Holder - 1x18650 (wire leads)
Brand: SparkFun
This is an incredibly simple one cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into applications like robotics or prototyping by simply dropping one into this device and attaching the leads, that’s it.
$2.65 AUD, inc GST
2-Way 18650 Battery Holder
Brand: DFRobot
This easy-to-use 16850 battery holder with dual-slot offers micro and type-C charging inputs, five 5V/2A output ports, five 3.3V/1A output ports and one...
$20.33 AUD, inc GST
LiPo Safety Battery Bag (23x30cm)
Brand: Core Electronics
Keep your batteries in a safer place with this LiPo bag
$7.05 AUD, inc GST
18650 Battery Holder (Through Hole tabs)
Brand: Core Electronics
Gracefully hold 18650 batteries with these durable ABS holders.
$2.25 AUD, inc GST
3-pin LiPo Battery 1000mAh
Brand: Core Electronics
1000mAh Lithium-Ion battery with an inboard NTC.
$8.50 AUD, inc GST
Battery Holder - 2x18650 (wire leads)
Brand: SparkFun
This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into applications like robotics or prototyping by simply dropping one into this device and attaching the leads, that’s it.
$3.60 AUD, inc GST
Polymer Lithium Ion Battery (LiPo) 18650 Cell (3.7V 2600mAh, Solder Tab)
Brand: Core Electronics
This is the same 18650 Lithium Ion Cell that you know and love, but now includes pre-attached solder tabs! These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargable cell at 3.7V with a capacity of 2600mAh. This battery has been made even better with the attached solder tabs. You now have a much wider range of applications to drop this battery into while still remaining simple to install!
$12.15 AUD, inc GST
3-pin LiPo Battery 4000mAh
Brand: Core Electronics
4000mAh Lithium-Ion battery with an inboard NTC.
$27.40 AUD, inc GST
3 x 18650 Battery Holder with DC2.1 Power Jack
Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$4.40 AUD, inc GST
2 x 18650 Battery Holder with DC2.1 Power Jack
Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$3.40 AUD, inc GST
4 x AA Battery Holder with On/Off Switch
Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST
18650 Battery Holder (Surface Mount Tabs)
Brand: Core Electronics
Cradle your 18650 batteries with these ABS holders
$1.85 AUD, inc GST
9V battery holder with switch & 5.5mm/2.1mm plug
Brand: Adafruit
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic...
$8.75 AUD, inc GST
Battery Holder 4xAA with Cover and Switch
Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.40 AUD, inc GST
8-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for eight AA cells arranged as two back-to-back four-cell holders.
$7.60 AUD, inc GST
3-pin LiPo Battery 10000mAh
Brand: Core Electronics
10000mAh Lithium-Ion battery with an inboard NTC.
$63.40 AUD, inc GST
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH
Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$5.40 AUD, inc GST
6xAA Battery Holder(double layer)
Brand: DFRobot
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.
$2.17 AUD, inc GST
2xAAA Battery Holder with JST-PH Connector
Brand: Kitronik
2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.
$1.90 AUD, inc GST
Battery Holder - 2xAA (JST-PH)
Brand: SparkFun
This is a two-cell AA battery holder with 6" (~150mm) cable that has been terminated with a JST-PH connector.
$3.10 AUD, inc GST
4xAA battery holder (square with cover)
Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration. This holder features a sliding, removable cover as well as an ON/OFF switch which can be used to control power to your project.
$2.49 AUD, inc GST
4 x AA Battery Holder with 2.1mm Plug
Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for four (4) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.90 AUD, inc GST
5 x AA Battery Holder with 2.1mm DC Jack
Brand: Adafruit
Here's yet another addition to Adafruit's family of AA battery holders. It's a holder for five (5) AA batteries, with 5" wire leads. It's black and has a 2.1mm barrel plug...
$8.95 AUD, inc GST
Kitronik ZIP Halo for the BBC micro:bit
Brand: Kitronik
Add some colour to your next coding project with our new Halo board for the BBC micro:bit. The Halo has 24 individually addressable full colour ZIP LEDs.
$23.10 AUD, inc GST
3-pin LiPo Battery 20000mAh
Brand: Core Electronics
20000mAh Lithium-Ion battery with an inboard NTC.
$119.95 AUD, inc GST
3-pin LiPo Battery Zero 800mAh
Brand: Core Electronics
800mAh Lithium-Ion battery with an inboard NTC.
$7.70 AUD, inc GST
Battery Holder - 18650 (PTH)
Brand: SparkFun
This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you’ll need two for each battery. These work great for larger, high capacity applications where a drop-in rechargable cell is needed. These little guys are low cost and easy to use!
$1.65 AUD, inc GST
3xAA Battery Holder
Brand: DFRobot
This battery holder is used to hold 3 zinc-manganese batteries (non-rechargeable) or 3 NiMH / NiCd batteries, which can change into a 4.5V battery pack from the...
$2.40 AUD, inc GST
SparkFun Adjustable LiPo Charger
Brand: SparkFun
The SparkFun Adjustable LiPo Charger is a single-cell lithium polymer (LiPo) and lithium ion battery charger. Because it’s adjustable, this charger will be able...
$23.60 AUD, inc GST
Battery Holder 2xAA with Cover and Switch
Brand: SparkFun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.85 AUD, inc GST
6-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for six AA cells arranged as two back-to-back three-cell holders.
$9.65 AUD, inc GST
CR123A Li-ion Battery Holder(V1.0)
Brand: DFRobot
This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to...
$10.07 AUD, inc GST
Battery Holder - 1xAA (PTH)
Brand: SparkFun
PCB mount clip to hold a AA battery. Sold in single units, you’ll need two. These work great for small, low power applications that need a battery to run. Low cost and easy to use!
$1.10 AUD, inc GST
3 x AA Battery Holder with 2.1mm Plug
Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for three (3) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.70 AUD, inc GST
Battery Holder - 2xAAA with Cover and Switch
Brand: SparkFun
This 2xAAA battery holder puts a nice finishing touch on your battery-powered project. This holder features a sliding, removable cover as well as an ON/OFF switch...
$3.20 AUD, inc GST
3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip
Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$7.60 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.