Search results for: 'jumper wire kit for solderless breadboard'

Stay organized and create tidy circuits with this pack of breadboard jumper wire. It comes with 140 pieces (10 pieces of 14 different lengths), pre-bent for insertion into your breadboard.

These jumper wires feature a male pin at each end which is perfect for connecting different points of the breadboard together.

A jumbo pack of pre-formed and tinned wire, ready for use in breadboards. Take your prototyping to the next level with this excellent value kit. Comes packaged in a solid plastic case.

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumpers (colors shown).

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumpers (colors shown).

These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board, to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown).

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

Breadboard 1 pin dual-male jumper wire 75pcs pack. Pack comes with 2 different length: 200mm (25pcs) and 100mm(50pcs), Perfect design and adequate quality...

These 24" (60 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female connectors on both ends that work with 0.1" (2.54 mm)...

These premium wires are stranded 26 AWG wires with male terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 24" (60 cm) wires have black insulation and ship in packs of 5.

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 12" (30 cm) wires have white insulation and ship in packs of 10.

These premium wires are stranded 26 AWG wires with male terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 12" (30 cm) wires have green insulation and ship in packs of 10.

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

These premium wires are stranded 26 AWG wires with male terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26AWG wires with female terminals on one end and male terminals on the other end. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 6" (15 cm) wires have yellow insulation and ship in packs of 10.

These premium wires are stranded 26 AWG wires with male terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

These premium wires are stranded 22AWG wires with female terminals on one end and male terminals on the other end. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 3 ft (90 cm) wires have yellow insulation and ship in packs of 5.

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything else. There is a 3-pin JST connector with 0.1" spacing on both ends. These jumper wires come with black, red, and white cables.

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

These premium wires are stranded 22AWG wires with female terminals on one end and male terminals on the other end. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. The assortment of 36" (90 cm) wires includes two each of ten different colors.

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end. It also comes with the mating connector for the Molex.

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.