Search results for: 'current sensor module'

This board is a simple carrier of Allegro’s unidirectional 5A ACS724LLCTR-05AU Hall effect-based linear current sensor, which offers a low-resistance...

This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mO)...

This board is a simple carrier of Allegro’s ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 15.5 A and outputs a proportional analog voltage centered at Vcc/2 with a typical error of ±5%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

This is the compact version of a simple carrier for Allegro’s CT433-HSWF20MR TMR-based, electrically isolated current sensor that is optimized for high...

This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance...

This board is a simple carrier of Allegro’s bidirectional ±30A ACS724LLCTR-30AB Hall effect-based linear current sensor, which offers a low-resistance...

This board is a simple carrier of Allegro’s bidirectional ±5A ACS724LLCTR-05AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (400 mV/A) centered at 2.5 V with a typical error of ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

This is the large version of a simple carrier for Allegro’s ACS37220LEZATR-200B5 Hall effect-based, electrically isolated current sensor, which offers an...

This board is a simple carrier of Allegro’s ±31 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 31 A and outputs a proportional analog voltage centered at Vcc/2 with a typical error of ±4%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

This board is a simple carrier of Allegro’s ±5A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (185 mV/A) centered at 2.5 V with a typical error of ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

This is the smaller version of a simple carrier for Allegro’s ACS37041KLHBLT-030B3 Hall effect-based, electrically isolated current sensor in a 5-pin...

This board is a simple carrier of Allegro’s ACS71240KEXBLT-030B3 Hall effect-based linear current sensor, which offers a low-resistance (~0.6 mO) current...

This board is a simple carrier of Broadcom’s bidirectional ±20A ACHS-7122 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mO)...

This is the compact version of a simple carrier for Allegro’s ACS37030LLZATR-040B3 electrically isolated current sensor that uses two signal paths—Hall...

This is the compact version of a simple carrier for Allegro’s ACS37030LLZATR-065B3 electrically isolated current sensor that uses two signal paths—Hall...

This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-100B3 Hall effect-based, electrically isolated current sensor, which offers a...

This is the compact version of a simple carrier for Allegro’s ACS72981ELRATR-200U3 Hall effect-based, electrically isolated current sensor, which offers a...

This board is a simple compact carrier of Allegro’s ACS72981KLRATR-150U3 Hall effect-based linear current sensor, which offers a low-resistance (~0.2 mO)...

This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-100U5 Hall effect-based, electrically isolated current sensor, which offers a...

This is a newly-introduced Breakout version of BMP388 Sensor from DFRobot with pressure and temperature measurement. It supports Arduino code control, and the BMP388...

This is the large version of a simple carrier for Allegro’s ACS72981KLRATR-150U5 Hall effect-based, electrically isolated current sensor, which offers a...

Check out this Tilt sensor module! Use it for security cameras, robotics, and all your Maker projects.

This is the large version of a simple carrier for Allegro’s CT432-HSWF50DR TMR-based, electrically isolated current sensor that is optimized for high...

Monitor DC current, bus voltage, temperature and power over I²C with the INA237's 16-bit ADC, Qwiic connectors, screw terminal and alert output.

The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do. It offers excellent range accuracy and stable readings in an easy-to-use package.

When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. Gravity: Analog AC Current Sensor comes to the rescue...

BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer...

Get this vibration sensor to build a burglar alarm system to protect your property! This cost-effective vibration sensor, characterized by high sensitivity, fast...

This board is a simple compact carrier of Allegro’s ACS72981LLRATR-100U3 Hall effect-based linear current sensor, which offers a low-resistance (~0.2 mO)...

TF-Luna is a single-point ranging LiDAR, based on the TOF (Time of Flight) principle. It is mainly used for stable, accurate and high-frame-rate range detection.

The KR Sense 45A is a small voltage and current sense breakout board. DC current is determined by measuring a voltage drop across a parallel shunt resistor, then...

This is the large version of a simple carrier for Allegro’s ACS72981ELRATR-200B3 Hall effect-based, electrically isolated current sensor, which offers a...

This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to...

This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to...

This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to...

This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to...

This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to...

This red LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield.

This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to...