Search results for: 'aaa battery box'
3x AAA Battery box (Dupont, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$1.70 AUD, inc GST
3xAAA Battery Holder
Brand: DFRobot
A nice portable power pack can help you a lot when you build up you projects. Come and make one with this 3×AAA battery holder. This is a 3xAAA Battery Holder. It...
$2.40 AUD, inc GST
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH
Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$5.40 AUD, inc GST
3-AAA Battery Holder
Brand: Pololu
Battery holder for three AAA cells.
$4.75 AUD, inc GST
2xAAA Battery Holder with JST-PH Connector
Brand: Kitronik
2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.
$1.90 AUD, inc GST
3xAA Battery Holder
Brand: DFRobot
This battery holder is used to hold 3 zinc-manganese batteries (non-rechargeable) or 3 NiMH / NiCd batteries, which can change into a 4.5V battery pack from the...
$2.40 AUD, inc GST
Battery Holder - 2xAA (JST-PH)
Brand: Sparkfun
This is a two-cell AA battery holder with 6" (~150mm) cable that has been terminated with a JST-PH connector.
$3.10 AUD, inc GST
3-AAA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for three AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$8.70 AUD, inc GST
3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip
Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$7.60 AUD, inc GST
3x AAA Battery Holder with Switch - Tiny FX Compatible
Brand: Pimoroni
Power your Tiny FX projects with this 3x AAA battery holder featuring a built-in power switch, JST-SUR connector, and 3.3-4.5V output range for reliable portable power.
$6.30 AUD, inc GST
Battery Holder 3xAA with Cover and Switch - JST Connector
Brand: Sparkfun
This 3xAA battery holder with JST connector puts a nice finishing touch on your battery powered project...
$5.10 AUD, inc GST
Waterproof 3xAA Battery Holder with On/Off Switch
Brand: Adafruit
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...
$11.40 AUD, inc GST
Waterproof 2xAA Battery Holder with On/Off Switch
Brand: Adafruit
Keep your power source safe and toasty in these waterproof 2xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...
$9.40 AUD, inc GST
2x AAA Battery box (JST-PH, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$1.50 AUD, inc GST
AAA Battery Holder
Brand: Core Electronics
Single AAA Plastic battery holder. Supplied with fly leads.
$1.05 AUD, inc GST
2 x AAA Battery Holder with On/Off Switch & JST PH Connector
Brand: Adafruit
This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is nicely slim, and 2 AAA's...
$4.65 AUD, inc GST
BBC Micro:bit V2.2X Bulk Go Kits - 100 Boards
Brand: micro:bit
This is the most economical choice for micro:bits and the preferred format for most large educational settings. Inside are 100 micro:bit boards, ready for use in schools, large makerspaces, and coding clubs.
$2899.50 AUD, inc GST
Battery Holder - 2xAAA with Cover and Switch
Brand: Sparkfun
This 2xAAA battery holder puts a nice finishing touch on your battery-powered project. This holder features a sliding, removable cover as well as an ON/OFF switch...
$3.20 AUD, inc GST
Similar matches
micro:bit V2.2 GO Bundle
Brand: micro:bit
Micro:bit V2 Go Bundle has everything makers need to take their projects on the go with them. With this kit, you are ready to start learning how to code and work with electronics.
$28.15 AUD, inc GST
18650 Battery Holder (Through Hole tabs)
Gracefully hold 18650 batteries with these durable ABS holders.
$2.25 AUD, inc GST
3 x 18650 Battery Holder with DC2.1 Power Jack
Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$4.35 AUD, inc GST
4-AA Battery Holder
Brand: Pololu
Battery holder for four AA batteries.
$5.65 AUD, inc GST
6 x AA battery holder with 5.5mm/2.1mm plug
Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supply. Either one...
$7.75 AUD, inc GST
2 x 18650 Battery Holder with DC2.1 Power Jack
Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$3.35 AUD, inc GST
9V battery holder with switch & 5.5mm/2.1mm plug
Brand: Adafruit
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic...
$8.75 AUD, inc GST
Battery Holder 4xAA with Cover and Switch
Brand: Sparkfun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.40 AUD, inc GST
4xAA battery holder (square)
Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.
$1.95 AUD, inc GST
Argon IR Remote for Argon ONE V2 and M.2 Cases
Brand: Argon40
Argon IR Remote for Argon ONE V2 and M.2 Cases.
$16.45 AUD, inc GST
AAA Battery
Brand: Core Electronics
Power your next project with these energizer batteries. This is an alkaline AAA battery
$1.45 AUD, inc GST
3-AA Battery Holder
Brand: Pololu
Battery holder for three AA cells.
$3.60 AUD, inc GST
6-AA Battery Holder
Brand: Pololu
Battery holder for six AA batteries.
$8.80 AUD, inc GST
4 x AA Battery Holder with Premium Jumper Header Wires
Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$7.50 AUD, inc GST
Battery Holder 2xAA with Cover and Switch
Brand: Sparkfun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.85 AUD, inc GST
3x AA Battery Holder with On/Off Switch and 2-Pin JST
Brand: Adafruit
Here's another addition to the growing family of AA battery holders. Behold! A holder for three (3) AA batteries! It's got a 6" long genuine JST-PH 2-pin cable connector, an On/Off switch, and, oh yes, it's in classy Adafruit black.
$7.95 AUD, inc GST
4-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for four AA cells arranged as two back-to-back two-cell holders.
$5.20 AUD, inc GST
8-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for eight AA cells arranged as two back-to-back four-cell holders.
$7.60 AUD, inc GST
Power Supply AAA Battery Power Booster Module 5V Output
Brand: Core Electronics
Power up your LED wearable projects with this AAA Boost module.
$3.55 AUD, inc GST
Battery Holder - 18650 (PTH)
Brand: Sparkfun
This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you’ll need two for each battery. These work great for larger, high capacity applications where a drop-in rechargable cell is needed. These little guys are low cost and easy to use!
$1.65 AUD, inc GST
4 x AA Battery Holder with 2.1mm Plug
Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for four (4) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.90 AUD, inc GST
6-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for six AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also...
$14.20 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.