Search results for: 'LoRa fiberglass antenna'
- LoRa Fiberglass Antenna Kit; 902-928MHz-3dBi with Antenna BaseSKU: SS318020652 Brand: Seeed StudioLoRa-Fiberglass Antenna-902-928MHz-3 dBi-360mm-Seeed Studios...$124.95 AUD, inc GSTAs low as $116.20 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- LoRa Fiberglass Antenna, 860-930MHz, 5dBi, 600mmSKU: SS318020612 Brand: Seeed StudioFibreglass LoRa antenna with gain of 8dBi, frequency range 858-878MHz and 130cm length...$149.95 AUD, inc GSTAs low as $139.45 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
Makerverse LoRa-E5 BreakoutLong-range and low power data transmission for remote projects.
- Omni Outdoor Antenna High Gain Fiberglass Full Wave 915MHz 6dBi RP-SMA (LoRa AU915 & AS923)SKU: CE05943High Gain Omni Antenna specifically design for LoRa Gateway applications and a zero compromise setup.
- 8dBi Fiberglass Antenna - N-Type to RP-SMA - 900-930MHzSKU: RW-916001 Brand: RAKwireless
IP67-rated outdoor sub-GHz antenna offers 8dBi gain via integrated connector, extending AU915 and AS923 coverage in rural or elevated deployments.
- 5.8dBi Fiberglass Antenna - N-Type to RP-SMA - White - 902MHz-928MHzSKU: RW-915004 Brand: RAKwireless
Omnidirectional 902-928 MHz dipole antenna provides 5.8 dBi gain and 360° coverage for LoRaWAN with weatherproof fibreglass housing and N-type connector.
- 915MHz LoRa Antenna RP-SMA - 1/2 Wave 2dBiSKU: WRL-14876 Brand: SparkfunIncrease your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and is 200mm long.
- 915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBiSKU: WRL-14875 Brand: SparkfunA small ¼ wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA connector. Gain is...
- 868MHz European LoRa Antenna RP-SMA - 1/4 Wave 2dBiSKU: WRL-18082 Brand: SparkfunThis is a small 1/4 wave rubber duck antenna for (European band) LoRa or other 868MHz communication. Antenna has a center frequency of 868MHz and utilizes an RP-SMA...$16.40 AUD, inc GSTAs low as $14.92 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- 2.6dBi LoRa Antenna - SMA male - 915MHz - 195mmSKU: SS318020389 Brand: Seeed StudioLoRa Antenna for devices from the E5 series with maximal gain of 2.6dBi and frequency of 902-928MHz...
- 2.8dBi LoRa Antenna - SMA male - 868MHz - 195mmSKU: SS318020269 Brand: Seeed StudioLoRa Antenna for devices from the E5 series with maximal gain of 2.8dBi and frequency of 868MHz...
- LoRa E5 ShieldSKU: CE09722 Brand: Unexpected Maker
LoRa E5 Shield for the TinyPICO, TinyS2 & TinyS3 This shield includes an E5 LoRa module from Seeed, that works in a range of regions
- 8 Channel LoRa Gateway Kit comes with Raspberry Pi, LoRa and GPSSKU: ADA4327 Brand: AdafruitIf you're building a IoT project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases. But, what if you find...$429.95 AUD, inc GSTAs low as $408.45 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- LoRa Transceiver Module (RFM95CW)SKU: COM-18085 Brand: SparkfunRFM95CW is an ultra-low-power, high-performance LoRa transceiver for various frequency of 137-1020 MHz wireless applications. The high integration of RFM95C simplifies...
- RFM95CW 915MHz LoRa ModuleSKU: ADA5684 Brand: AdafruitSending data over long distances is like magic, and now you can be a magician with this easy-to-use module that you can solder onto your microcontroller...$21.20 AUD, inc GSTAs low as $20.14 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- XIAO ESP32S3 for Meshtastic & LoRaSKU: SS102010611 Brand: Seeed StudioThis thumb-sized LoRa dev kit, featuring the XIAO ESP32S3 and Wio-SX1262 LoRa module, is an ideal starter kit for Meshtastic and LoRa/LoRaWAN projects. Supporting WiFi, BLE, and LoRa, it includes a built-in power management chip and can be extended via IIC, UART, and other GPIO interfaces, with compatibility for Arduino development.
- SparkFun MicroMod LoRa Function BoardSKU: WRL-18573 Brand: SparkfunThe SparkFun MicroMod LoRa Function Board provides LoRA and LoRaWAN capabilities to your MicroMod project...$68.95 AUD, inc GSTAs low as $62.74 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- LoRa 1W Breakout - 868M30SSKU: SPX-22791 Brand: SparkfunDo you need power? This breakout for the 868M30S module from EBYTE is a 1W (30dBm) LoRa transceiver. LoRa is great for long range (miles), low power (in sl...
- LoRa 1W Breakout - 433M30SSKU: SPX-22792 Brand: SparkfunDo you need power? This breakout for the 433M30S module from EBYTE is a 1W (30dBm) LoRa transceiver. LoRa is great for long range (miles), low power (in sl...$65.30 AUD, inc GSTAs low as $59.42 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- LoRa 1W Breakout - 915M30SSKU: SPX-18572 Brand: SparkfunDo you need power? This breakout for the 915M30S module from EBYTE is a 1W (30dB) LoRa transceiver. LoRa is great for long range (miles), low power (in sle...
- Arduino Portenta Vision Shield - LORASKU: ASX00026 Brand: ArduinoThe Portenta Vision Shield LoRa® brings industry-rated features to your Arduino Portenta. This hardware add-on will let you run embedded computer vision applications, connect wirelessly via LoRa® to the Arduino Cloud or your own infrastructure, and activate your system upon the detection of sound events.
- SX1262 LoRa HAT for Raspberry Pi (915MHz)SKU: WS-16807 Brand: Waveshare
A LoRa expansion board for Raspberry Pi offers ultra-long-range wireless communication up to 5 km, wake-on-radio and UART control for DIY IoT applications.
- SparkFun LoRa Thing Plus - expLoRaBLESKU: WRL-17506 Brand: SparkfunThe SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the...
- Dipole AntennaSKU: X000016 Brand: ArduinoGSM antenna (850/900/1800/1900 MHz ) that can be attached to the board with the micro UFL connector.
- SparkFun Pro RF - LoRa, 915MHz (SAMD21)SKU: WRL-15836 Brand: SparkfunThe SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its...$60.60 AUD, inc GSTAs low as $55.15 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
Pycom FiPy Getting Started
Say you want to build a sun-tracking solar panel. You could add a tiny computer, like an Arduino, to control it. That might be all you need. But what if you need to connect to it to control it from somewhere else? Connecting it into your ho...
Pycom FiPy Overview
This is the Big Daddy of the Pycom range of devices. The Pycom FiPy has all these connection capabilities (with one tiny caveat): Wi-Fi 802.11b/g/n 16Mbps LoRa (all regions, not 433MHz) Sigfox Cellular LTE (Cat-M1/NB-IoT) Bluetooth L...
Pycom GPy Overview
School zone sign There are lots of maker and Internet of Things (IoT) projects that need a high quality mobile Internet connection. While technologies like Sigfox and LoRa are going to be a big part of our future, in a lot of places cellu...
All Pycom Boards and Expansion Boards Compared
Pycom is a constantly groundbreaking company which produces a lot of really cool development boards and expansion shields. They have a large focus on multiple network connectivity, particularly in regards to low power, long-distance informa...
Raspberry Pi Pico with LoRaWAN and The Things Network - Makerverse LoRa-E5 Module - Transmit Weather Data into IoT
Feel restricted by your connectivity? Want to send data from a remote node 10km away from civilization? Or ~3km when you are in a built-up civilization. Feel the urge for Liberation? Then I have the solution for you! Using only hardware bu...
Pycom SiPy Overview
If there’s an odd one in the Pycom family of microprocessor boards it’s this one, the SiPy. There’s nothing wrong with it, it’s just that its sister board the LoPy4 has the same capabilities as SiPy, plus a LoRa ...
Building a LoRaWAN Nano Gateway to The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. warning: this is a "nano" gateway...
What are Xbee Modules?
Wi-Fi, as we know it, is a form of wireless communication based on the 802.11 standards as outlined by the IEEE (the Institute of Electrical and Electronics Engineers). If you're paying attention to it, you'll notice an appendage to this st...
Meshtastic for Makers Workshop
Welcome to the Meshtastic for Makers Workshop, a short course that teaches you everything you need to know about Meshtastic so you can go out and start wirelessly sending information in your projects with the Meshtastic network. This works...
Onion Omega - First Time Setup Using the Command Line
In this tutorial, we will learn how to set up the Onion Omega2/Omega2+ for the first time using the command line. While the Omega2/2+ has a graphical setup wizard and a web-based GUI called the "Console," we have found both to ...
Pycom LoPy Overview
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. The two main standards at work in...
Prototyping a Circuit: Methods and Tools
Ah prototyping, the backbone of maker electronics, well really all electronics. Any successful device, product, or idea doesn’t just appear as a finished concept, it goes through stages of product and one of those is prototyping. In f...
4G and GPS HAT For Raspberry Pi - Waveshare SIM7600X
Love your Raspberry Pi but wish it had even more connectivity akin to your mobile phone. Then the Waveshare 4G HAT is the solution for you! HAT simply means Hardware attached On Top. With this installed on your Raspberry Pi Single Board Co...
Boards of a Feather
Have you ever used an Arduino board, and wanted to hook it straight up to a JST connected LiPo battery but knew it wouldn’t work? Or maybe you wanted a microcontroller with built-in wireless capabilities? Well, Adafruit has developed...
Getting Started on The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. Since you’ve got your new P...
Your First LoRaWAN Node on The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. In the lasts article we looked at...
Pycom GPy & FiPy Cellular LTE Firmware Update
There are three levels of firmware upgrades that are required on Pycom gear. First, performing an upgrade on the firmware of any of the Pycom microcontrollers is a simple affair. Download the Pycom Firmware Update application as linked in t...
Getting started with your Onion Omega2/2+
In this tutorial we will learn how to set up the Onion Omega2/Omega2+ for the first time. You will require the following: Onion Omega2 or Omega2+ An Onion Omega2 Dock, such as: An Onion Omega2 dock, eg. Power Dock or Bre...
IoT with LoRaWAN, Pycom, The Things Network & Node-RED
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. In our two previous Pycom article...
Pycom WiPy Overview
The Internet of Things(IoT) and its devices have been utilised by ‘DIYers’ and ‘Makers’ to connect projects to the internet and take advantage of the worldwide network we have created. Some might say a sentence with ...
Light Sensing with an LDR and Pycom
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. One of the simplest sensors in an...
Ultrasonic Sensing with Pycom
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. One of the most common sensors in...
Identify Electrical Connectors
There are a ton of electrical wire connectors, too many to elaborate on in a single guide, however there are a couple of connectors that as a maker you will come across. Often when starting your way into the electronics world all you need ...
Getting Started With Walter | An ESP32 With 4G/5G and GPS!
In this guide, we’ll be taking a look at Walter, a pretty impressive ESP32‑based board that gives your projects full internet access anywhere there’s mobile coverage - no Wi‑Fi required. With a built‑in 4GR...
Pycom GPy Getting Started
warning: Pycom has updated their libraries and the code listed below may not work. If you discover this and find a fix, please post it on our forum and we'll send you a $25 store credit along with a huge thank you. Go to Forum Thread. ...
Raspberry Pi Pico W | Overview, Features and Specs
IntroductionLet’s take a look at the Raspberry Pi Pico W - a WiFi-enabled development board from Raspberry Pi. This overview article will explore the Pico W features and specifications. As always, there are additional resources at th...
The Things Network, IFTTT, and BEYOND!
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. Connecting your Pycom Lopy4 or an...
Lightning Sensor with a Raspberry Pi Single Board Computer - 40 KM RADIUS RANGE!
What if I told you that you could have the power to detect a lightning strike from 40km away? You'd probably think I've gone mad watching too many Marvel movies. But it is true! All thanks to the DFRobot Gravity: Lightning Sensor. Accessib...
Send a Downlink from Adafruit.io via The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. Any good LoRaWAN device can send ...
Pycom Pysense Getting Started Guide
The Pysense expansion board from Pycom has many sensors. In Pycom Pytrack Getting Started, I showed how with some Processing code we can see the real-time position of the board in 3D. That project works with the Pysense too. How about we sh...
Effective Ways To Measure Distance In Maker Projects
In this guide, we’re going to explore some of the most effective ways to measure distance in maker projects. Whether you’re working on a robotics project, an automatic door, or just trying to figure out how far away the fridge ...
Understanding ESP32 Naming Conventions
Espressif is a constantly ground-breaking company that produces lots of really cool development modules which includes the ESP32. ESP32 Boards, ESP32 Dev-Kits, and ESP32 Modules (the part that gets soldered to the Board/PCB) are all about ...
Getting Started With Ultra-Wideband & Measuring Distances| Arduino & Pico Guide
In this guide, we will be exploring ultra-wideband modules and how you can use them to add robust distance measurements to your next maker project. We'll be learning how these incredible little boards work, what you can expect from them, a...
Temperature Sensing with the TMP36 and Pycom
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. The TMP36 is a low cost, eas...
Encoding and Decoding Payloads on The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. Sending data to the cloud is grea...
Pycom Bluetooth
Bluetooth is a low-power radio technology used to link devices wirelessly. Most commonly recognised as the way to link a mobile phone to a car or speaker, it has many uses beyond that. The "low power" aspect is not a shortcoming, as a large...
Track Airplanes up to 400km Away with a Raspberry PiAware - FlightAware
It is time for an Airplane Tracking Raspberry Pi! The final setup here will let you personally collect data on the exact whereabouts of airplanes over 400km away. It will update one to four times each minute. Be passenger planes, cargo air...
How GPS Receivers work
GPS is accurate and handy to use, so much so that we rely on it more and more every day. It's not often we take the time to learn how it works. The idea of GPS refers to a Global Positioning System; a collection of satellites in orbit above...
uGateway: How to Update the WiFi Settings
uGateway is setup, with the exception of your WiFi password. It's perhaps best we don't know what that is! If you know your way around Pi Zero and Raspbian (with desktop edition) then you can edit WiFI details as normal. He...
Pycom Expansion Board 2.0 Overview
It would be good to have some understanding of Pycom microcontroller boards before reading this article. We won’t go into what capabilities each microcontroller board has. If you’d like an introduction, try our Pycom WiPy Overvi...
Raspberry Pi 3 Model B+ Performance vs Raspberry Pi 3 Model B
The Raspberry Pi 3 Model B+ (I’ll be calling it the Pi 3+ for short) is an update to the existing Raspberry Pi 3 Model B and was released on Wednesday 14th March 2018. It has some very interesting changes: The Broadcom BCM2837 has ...
How to use GPS with Arduino - Parse and Log NMEA Sentences
Now that we've investigated and explained how How GPS Receivers work we can apply that understanding to some real-world applications of of the ideas. To start, we can use any GPS receiver, an Arduino Uno and some male-to-female Jumper ...
Raspberry Pi Pico W vs. Pico | What's the difference?
IntroductionThis article will compare the Raspberry Pi Pico, and Pico W. Aside from the obvious difference (the Pico W has wireless connectivity), there are a few smaller and more subtle differences that are worth considering.Physical Comp...
PiicoDev Transceiver | Getting Started Guide
A radio transceiver is a device that can both transmit and receive radio signals, making it the perfect tool for communication on the go and remote projects! The PiicoDev Transceiver™ is a 915MHz radio that can send short messages up...
How to use an ESP8266 in the Arduino IDE
In August of 2014 Shanghai-based chip manufacturer, Espressif, released a ultra-cheap Serial to Wi-Fi chip called the ESP-01. At the heart of the ESP01 was an ESP8266 chip broken out into the 8 pins needed to program it via a microcontrolle...
Internet of Things with Pycom and Adafruit IO - From Zero to Hero
Introduction We’re going from zero to hero. Starting from nothing we’ll get a WiPy communicating with Adafruit IO, an IoT service out on the Internet. We’ll be able to send data from the device to the cloud and control th...
MicroPython Board Comparison
Welcome to the benchmarking arena! We are going to put eleven microcontrollers to the test and see how they hold up against a set of fiendish tasks that we devised to push them beyond their limits. We chose most of our candidates based on t...
Using mmWave Radar to Detect and Track Humans | Raspberry Pi Guide
In this guide, we will be learning how to add the RD-03D radar sensor to your Raspberry Pi single-board computer so you can detect and track humans in real time. We will be looking at how the sensor works and what you can expect from it, h...
Detect and Track Humans with mmWave Radar on an Arduino
In this guide, we are going to be learning how to use the Rd-03D radar sensor to detect and track humans in your next Arduino project. We will be looking at how it works and what you can expect from it, how to wire up and code your Arduino...
Mobile Networks - Where Can My IoT Device Connect?
The Internet of Things (IoT) describes the network of physical objects that are all around us which are blessed with sensors, software, and other technology for the purpose of connecting and exchanging data with other devices and systems al...
How to add mmWave Radar to a Pico | Detect and Track Humans
In this guide, we will be learning how to use the RD-03D radar sensor with a Raspberry Pi Pico so you can detect and track humans in your next project. We will be looking at how it operates and what you will get out of it, how to con...
How to add GPS to a Raspberry Pi Pico | Get Real-Time Location in Your Project!
In this guide, we will be learning how to use a GPS module with the Raspberry Pi Pico and MicroPython. We will be looking at; how GPS works, how to wire up and code the Pico to use the GPS module, and as a final step we will be putting it ...
Wings of the Feather
The Feather boards are the brains of your project, we took a closer look at the different models in our Birds of Feather article, check that out first (especially if you have no idea what the difference is between a feather and a wing). You...
Zero To Maker Workshop | Fab Academy (Our Experience)
Welcome to 'Zero to Maker,' a workshop that will walk through and introduce a ton of tools and skills to help Makers of all skill levels! In this series, Jaryd and Liam will be completing projects as a part of the 2024 Fab Academy and...
LoRa P2P Wireless Gate Alarm
Introduction
My front gate is a long way from the house at around 300m. I don’t want people wandering around my property without knowing about it. This project uses two Raspberry Pi P...
LoRaWAN Tank Level Sensor Node
My brother-in-law has a dairy farm in Victoria and many hours per week are wasted traversing the farm to check water tank levels, opening/closing valves, and other small tasks that could easily be remotely monitored and controlled. It was ...
Raspberry Pi Pico Long Range Radio (LoRa) Weather and Air Quality Station - Full Dashboard (DataCake + TTN), Rain-Proof and Long Range
Have you ever wanted to make a Weatherproof Weather and Air Quality System that transmits its edge-collected data long-range through LoRa (up to a 10Km range) and then have that data automatically uploaded to the Internet to be gorgeously ...
Raspberry Pi Cyberdeck (SDR Edition)
I’ve always wanted a compact, rugged, and portable computer that can withstand any environment thrown at it. I’m a huge fan of Raspberry Pi computers and stumbled across Jay Doscher’s awesome designs for fitting Raspberry Pis in Pelican ca...
IoT Soundscape
I had been captivated by the sound levels of trains I could hear passing by Metford throughout the day/night. I wondered if a sound level sensor reporting data back over LoRa would help me understand when a train was noisy. I also like the ...
IoT Chicken Shed (Arduino, Wifi)
If you have chickens and find you're not always available to close the gate at night or check the water levels each day, then why not use an ESP8266 to automate your chicken door and receive alerts door status and low water level, as well a...
FM Radio with Arduino, LCD and Si4703
A couple of years ago, I found a modern jukebox (with iPod connectivity, AM/FM radio, CD player and LEDs) dumped in my street. The body was in decent condition but all of the electronics were ruined apart from the LEDs. I decided to take it...
3D-Printed GPS Speedometer
Introduction
I wanted a GPS speedometer that is portable, robust, and looks okay. I had been messing around with 3D printing and exploring GPS modules for a few years and wanted...
Parts List
433mHz Radio connected pool thermometer
I was wanting to know what the water temperature was without having to physically go and check and I was curious about how warm the water would get during a sunny day and how much heat was lost overnight. I am interested in the idea of home...
The Great Doorbell Hack
Do you want a quick, easy, cheap RF remote control for your Raspberry Pi projects? Well, look no further than the front door! As you've probably got a half-duplex RF setup you've never considered using in a project before. Try thi...
Do you want a quick, easy, cheap RF remote control for your Raspberry Pi projects? Well, look no further than the front door! As you've probably got a half-duplex RF setup you've never considered using in a project before. Try thi...
Borg Cube for Scouts STEM Camp
Introduction
What does one make for a Startrek-themed STEM camp for Scouts? Especially when given the Search and Rescue (SAR) activity base to run. Why this base you ask? Usually I run a radio d...Introduction
What does one make for a Startrek-themed STEM camp for Scouts? Especially when given the Search and Rescue (SAR) activity base to run. Why this base you ask? Usually I run a radio d...
Solar Charging Station
The aim of this project was to use the sun to charge some batteries with 1W and 2W Seeed solar panels. The DFRobot Solar LiPo Charger and a Sunflower Solar Power Manager were purchased. Initially, this was unsuccessful because I did no...
ESP32 IR-Triggered Camera with Home Assistant Integration
I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love with it. The 8266 is all I ever wanted from a microcontroller: WIFI connectivity, a dec...
I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love with it. The 8266 is all I ever wanted from a microcontroller: WIFI connectivity, a dec...
SOLARBOI
Since I was young, I've always loved to explore. Over the years, I've tinkered with RC cars and played with planes, which were always plenty of fun. But I always dreamed of going out further - out into the real world, far beyond the confine...
Makers love reviews as much as you do, please follow this link to review the products you have purchased.