Search results for: '15-pin to 15-pin camera cable joiner'

41 results

Camera Cable Joiner/Extender for Raspberry Pi - 15-pin to 15-pin

Brand: The Pi Hut
Extend the range of your Raspberry Pi Camera Module, High Quality Camera or any other CSI camera module with this nifty cable joiner.
$6.85 AUD, inc GST

Raspberry Pi Camera FPC Adapter Cable 200mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.

$1.83 AUD, inc GST

Arducam CSI to HDMI Cable Extension Module

Brand: Arducam

The CSI-HDMI adapter board is designed for Raspberry Pi Camera Module 3/V1/V2/HQ,  to extend the camera over the long cables while keeping the high-speed CSI signals away from noise and interference.

$23.25 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 457mm / 18"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$5.20 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 1 metre

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$8.25 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 300mm / 12"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.80 AUD, inc GST

Active Cable Extension Kit for RPi Camera Modules

Brand: Arducam

Extend your Raspberry Pi camera connection up to 15 meters.

$82.65 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 610mm / 24"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$5.70 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 200mm / 8"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.60 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 100mm / 4"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.65 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 2 metre

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$12.40 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 50mm / 2"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.95 AUD, inc GST

50-pin 0.5mm FFC / FPC Extender

Brand: Adafruit
This 50-pin FFC / FPC Extender is very simple. It lets you connect two 50-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length.
$2.20 AUD, inc GST
Similar matches

Raspberry Pi Camera FPC Adapter Cable 500mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.

$5.38 AUD, inc GST

Raspberry Pi Camera FPC Adapter Cable 300mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.

$3.55 AUD, inc GST

1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.50 AUD, inc GST

Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)

Brand: Seeed Studio
Grove is a convenient plug-and-play system with the specialized interface, but that doesn't mean it couldn't be used in an open ecosystem like a breadboard
$5.90 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 10cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 10 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long

Brand: Adafruit
Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice...
$4.75 AUD, inc GST

2.5mm Pitch 5-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.20 AUD, inc GST

Camera Cable Joiner for Raspberry Pi - 15-pin to 22-pin

Brand: The Pi Hut
Extend the range of your ZeroCam projects with this handy cable joiner.
$6.95 AUD, inc GST

22-Pin 0.5mm Pitch FPC Cable - 20cm

Brand: Sparkfun
A 22-pin, 200mm flat, flexible cable with 0.5mm pitch. These cables are A-B style, so pin one on one side will match with pin one on the other side. Use...
$0.93 AUD, inc GST

2-Pin Wire Joints (3-pack)

Brand: Adafruit
These are the easiest way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you 'butt'...
$2.10 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 20cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 20 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

10-pin Socket/Socket IDC cable - 6

Brand: Adafruit
Connect this to that with an IDC cable! This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto...
$4.35 AUD, inc GST

0.1" (2.54mm) Crimp Connector Housing: 2x5-Pin 5-Pack

Brand: Pololu
These 2×5-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
$3.75 AUD, inc GST

0.1" (2.54mm) Crimp Connector Housing: 1x5-Pin 10-Pack

Brand: Pololu
These five-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
$3.60 AUD, inc GST

Zero Camera Cable Joiner for Raspberry Pi - 22-pin to 22-pin

Brand: The Pi Hut
Extend the range of your ZeroCam projects with this handy cable joiner.
$6.95 AUD, inc GST

22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 5cm

Brand: Adafruit
Connect this to that when a 22-pin FPC connector is needed. This 5 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on...
$1.85 AUD, inc GST

6-Pin Chassis Connector - Panel Mount (male and female)

Brand: Sparkfun
This 6-pin connector and plug set is great when you need to create a robust connection for signal or power. This product consists of two separate parts, the panel-mount jack and the mating plug. The plug has a ring which screws to the panel-mount connector ensuring a solid connection that won’t pull off.
$8.50 AUD, inc GST

22-Pin 0.5mm Pitch FPC Cable - 5cm

Brand: Sparkfun
A 22-pin, 50mm flat, flexible cable with 0.5mm pitch. These cables are A-B style, so pin one on one side will match with pin one on the other side. Use...
$0.90 AUD, inc GST

FPC Camera Connector - 24-Pin, 0.5mm (Bottom-Contact)

Brand: Sparkfun
Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm...
$1.90 AUD, inc GST

22-Pin 0.5mm Pitch FPC Cable - 10cm

Brand: Sparkfun
A 22-pin, 100mm flat, flexible cable with 0.5mm pitch. These cables are A-B style, so pin one on one side will match with pin one on the other side. Use...
$0.92 AUD, inc GST

16-pin Dual Contact 0.5mm Pitch FPC Connector

Brand: Sparkfun
This is a 16-pin surface mount dual contact 0.5mm pitch ZIF FPC connector...
$0.89 AUD, inc GST

20-pin 0.5mm FFC / FPC Extender

Brand: Adafruit
This 20-pin FFC / FPC Extender is very simple. It lets you connect two 20-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit)...
$1.75 AUD, inc GST

Camera Bridge SHIM for Pico

Add an easy to use Camera board to your Pico, then use the ArduCam Mega Cameras to take photos with a microcontroller!
$3.60 AUD, inc GST

10-pin IDC Socket Rainbow Breakout Cable

Brand: Adafruit
We don't really know what to call this thing - it's got a 10 pin IDC cable on one end 6 inches of rainbow ribbon and tipped with 0.1" female socket connectors on...
$7.45 AUD, inc GST

0.1" (2.54mm) Crimp Connector Housing: 2x16-Pin 5-Pack

Brand: Pololu
These 2×16-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
$7.15 AUD, inc GST

3-Pin Female JST ZH-Style Cable (30cm) for Sharp GP2Y0A51 Distance Sensors

Brand: Pololu
This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog...
$3.25 AUD, inc GST

0.1" (2.54mm) Crimp Connector Housing: 2x10-Pin 5-Pack

Brand: Pololu
These 2×10-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
$6.35 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.