Search results for: 'gobilda'

This hub allows you to mount components to a 8mm Shaft

This hub has an 8mm REX bore to match our

This latex tubing, commonly referred to as surgical tubing has.....

This hub allows you to mount components to a 6mm D-Shaft

This Stainless Steel Pattern Plate has the goBILDA 16mm square pattern and 24mm diagonal pattern with a 1/4"-20 threaded center. It makes...

This battery mount kit comes with the necessary hardware to mount a GB-14-0014 or GB-3100-0012-0020 battery to 1120 Series U-Channel or 1121 Series Low-Side U-Channel.

This hub allows you to mount components to a 5mm diameter shaft.

Meet the shorter brother of the 336mm Viper-Slide Kit! Whereas.....

This Stainless Steel Pattern Plate has the goBILDA 16mm square pattern and 24mm diagonal pattern with an M8 x 1.25mm threaded center. It.....

Help your bot get a clear view of its position on the field with a webcam that’ll be right where you need it every time! This USB Camera.....

This goBILDA® Smart Dock is a perfect way to power your project with a mighty 20V Li-ion battery! Just dock your favorite 20V battery that.....

The toughest of projects calls for the toughest of wheels! A futuristic tire-wheel fusion with an aggressive...

The thru-holes on this adaptor align with the 0.77" pattern of the Actobotics build-system. 6-32 screws or 6-32 locknuts (5/16” hex-size).....

Make your ideas move with a Servo Starter Pack! This handy bundle provides the most popular goBILDA® servos.....

The thru-holes on this adaptor align with the 16mm pattern found on almost every goBILDA part but are slotted outward for edge-case.....

The Mecanum Mixer is a crazy-simple, no-coding solution for the control of a mecanum chassis (like the Strafer!). Just plug it into your.....

This adaptor has thru-holes on two different REV patterns: With screws or nuts slid to one extreme within the counterbored.....

Downloads

The 5mm Hex Bore Sonic Hub is an excellent option when fastening a goBILDA component, such as a gear, pulley or wheel to a REV Robotics 5mm.....

The Element Receiver is designed for the Element 6 Radio Control System. It is compact and has an internal antenna to keep your project clean. Use it to control servos, motor controllers, or send signals to an Arduino.

This 72mm length control arm can be bolted to a goBILDA hub or other goBILDA components which has the 16mm square pattern. A ball linkage,.....

A 144mm Length 4103 Series goTUBE

The thru-holes of this adaptor align with the 16mm pattern of the Tetrix build system. The 6-32 screws or 6-32 locknuts from your Tetrix.....

A 120mm Length 4103 Series goTUBE

This 48mm length control arm can be bolted to a goBILDA hub or other goBILDA component which has the 16mm square pattern. A ball linkage,...

A 336mm length of 4103 Series goTUBE

The thru-holes on this adaptor align with the 16mm pattern found on almost every goBILDA part but are slotted outward for edge-case.....

Downloads

This hub allows you to mount components to a 4mm diameter shaft.

A 192mm Length 4103 Series goTUBE

Downloads

This remote switch is useful when your battery is nestled down inside your project. The switch simply plugs into the side of the

A 528mm Length 4103 Series goTUBE

Downloads

A 912mm Length 4103 Series goTUBE

A 1200mm length of 4103 Series goTUBE

The thru-holes on this adaptor align with the 16mm pattern found on almost every goBILDA part but are slotted outward for edge-case.....

A 288mm length of 4103 Series goTUBE

Servos aren’t invincible! A replacement case can provide a face-lift and restore your servo’s shape for proper fitment. It’s a great backup.....