8mm REX™ Shaft with E-Clip (Stainless Steel, 216mm Length)

SKU: GB-2106-4008-2160 Brand: goBilda
This feature-rich 216mm length shaft rocks an 8mm REX™ profile: a combination of an 8mm Round and a 7mm.....
$9.95 AUD, inc GST
$9.05 AUD, exc GST

Available with a lead time
Expect dispatch between Apr 11 and Apr 14

Quantity Discounts:

  • 10+ $8.59 (exc GST)
  • 25+ $8.15 (exc GST)
- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This feature-rich 216mm length shaft rocks an 8mm REX™ profile: a combination of an 8mm Round and a 7mm hEX profile. The round profile gives you the ability to run this shaft in 8mm round bore bearings (though we do offer a plethora of 8mm REX™ bore bearings and pillow blocks). The hex profile, meanwhile, provides the positive drive your project deserves. Threaded ends allow you to use these shafts as conventional standoffs, create dead axles, and fasten items to their ends with ease.

The included E-clip can serve as a built-in end-stop due to its collar-like capabilities. The shaft measures a convenient 4mm from the short end of the shaft to the far side of the clip so that selecting the right shaft length doesn’t leave you deep in the decimals. The 3.3mm of shaft protruding beyond the E-clip is enough to seat the shaft in a bearing when you're running that bearing from the inside of 1120 Series U-Channel. If you’d like to use the shaft without the E-clip, don’t worry: it’s easy to remove and re-install according to your project needs.

Downloads

Specs

Weight 70g
Material Stainless Steel
Length 216mm

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...

Arduino E-Paper Clock

This project started with a desire to have a modern digital clock that would use the natural light ...
This project started with a desire to have a modern digital clock that would use the natural light ...
Feedback

Makers love reviews as much as you do, please follow this link to review the products you have purchased.