The 7'' LCD CAPE which features a 7.0 TFT LCD 800x480 resolution display, is a cape specifically designed for the Beagle Bone Black (BBB). It provides a 7.0 primary display for the BBB for direct user interaction and information display, along with the ability for additional CAPES to be attached at the same time.
The 4DCAPE-70T utilises the drivers developed for the CircuitCo LCD7 A3, however it provides a different form factor and pricing point to the LCD7.
The BBB connects directly to the back of the 4DCAPE-70T, and allows everything the CAPE requires such as power and display signals. Another CAPE can be added to the secondary connectors on the back of the module if required.
The 4D 7.0 LCD CAPE features 7 push buttons below the screen, LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER, along with 2 LEDs to indicate Power and User Status (normally heartbeat).
Mounting of the 4DCAPE-70T is achieved with the 4x 3.5mm mounting holes present on the CAPE, enabling standard M3 or #6-32 screws to fasten the 4DCAPE-7.0 as required.
If you want to know the details about how to use the LCD with BeagleBone Black, please read the4DCAPE-70T Datasheet.
Note:
This product isn't include the BeagleBone Black.
This LCD not compatible with BeagleBone, can only works with BeagleBone Black.
Features:
7.0 TFT LCD CAPE for the BeagleBone Black
Resistive Touch Display
7 push buttons including LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER
2 LED Lights for Power and User
2x2 Jumper with shunts for EEPROM CAPE ID selection
Module dimensions: 179.9 x 114.9 x 19.5mm
Module dimensions with BeagleBone Black connected: Approx 179.9 x 114.9 x 19.5mm
4x 3.5mm Mounting holes
RoHS and CE Compliant
Specification:
5V DC Supply suitable for the BeagleBone Black, recommended 2A @ 5V.
Includes:
1x 4DCAPE-70T Display Module
1x Quick Start Guide
Documents:
Software:
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments