1-Wire to Qwiic Bridge - DS28E17

SKU: SPX-14291 Brand: Sparkfun

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

The 1Wire-to-Qwiic Bridge allows you to communicate via I²C over very long distances. It does so by utilizing the 1Wire communication protocol, which can communicate at distances of up to about 100 meters, depending on the application. The I²C information is packetized as a 1Wire packet, sent over the 1Wire bus to the DS28E17 Bridge, and translated to I²C for any slave device connected to the Bridge. Communication happens bi-directionally. Please note that the DS28E17 is a 1Wire IN/ I²C OUT device, meaning the master device needs to be connected to a 1Wire bus to communcate with the bridge.

Multiple 1Wire-to-Qwiic Bridges can be daisy-chained for multi-node networks. Footprints for both an RJ45 connector as well as an RJ11 connector have been added for convenient networking.

Each DS28E17 comes programmed with a unique 64-bit ROM registration number that serves as a node address in the 1-Wire network. This means that I²C devices that have limited or only a sinlge I²C address can be attached to separate 1Wire-to-Qwiic Bridges and addressed individually without the need of a multiplexer or other complicated addressing scheme.

The Qwiic system enables fast and solderless connection between popular platforms and various sensors and actuators. You can read more about the Qwiic system here. We carry 200mm, 100mm, 50mm, and breadboard friendly Qwiic cables.

We do not plan to regularly produce SparkX products so get them while they’re hot!

Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review