Xbee Pro IEEE 802.15.4 2.4Ghz 63mW 250Kbps RF Module w& U.FL Antenna Connector - XBP24-AUI-001J (Seeed Studio)
Retired Product
Search for an alternativeXBee-PRO 802.15.4 OEM RF modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing.
XBee-PRO modules are power-amplified versions of XBee modules for extended-range applications. Part of the XBee family of RF products, these modules are easy-to-use, share a common footprint, and are fully interoperable with other XBee products utilizing the same technology. Module users have the ability to substitute one XBee module for another with minimal development time and risk.
FEATURES
- • No configuration needed for out-of-the-box RF communications
- • Common XBee footprint for a variety of RF modules
- • Fast 250 kbps RF data rate to the end node
- • 2.4 GHz for worldwide deployment
- • Sleep modes supported for extended battery life
SPECIFICATION
- • Power output: 63 mW (+18 dBm) North American version ,10 mW (+10 dBm) International version
- • Indoor/Urban range: Up to 300 ft (90 m)
- • Outdoor/RF line-of-sight range: Up to 1 mile (1.6 km) RF LOS
- • Receiver sensitivity: -100 dBm (all variants)
- • RF data rate: 250 Kbps
- • Operating frequency: 2.4 GHz
- • Interface data rate: Up to 115.2 Kbps
- • Networking:
- • Spread spectrum typ: DSSS (Direct Sequence Spread Spectrum)
- • Supported network topologies: Point-to-point, point-to-multipoint, & peer-to-peer
- • Error handling: Retries & acknowledgements
- • Filtration options: PAN ID, Channel, and 64-bit addresses
- • Channel capacity: 12 Channels
- • Addressing: 65,000 network addresses available for each channel
- • Power:
- • Supply voltage: 2.8 - 3.4 VDC,XBee Footprint Recommendation: 3.0 - 3.4 VDC
- • Transmit current: 215 mA (@ 3.3 V)
- • Receive current : 55 mA (@ 3.3 V)
- • Power-down sleep current:<10 µA at 25° C
- • General:
- • Frequency band: 2.4000 - 2.4835 GHz
- • Interface options: 3V CMOS UART
- • Physical Properties:
- • Size: 0.960 in x 1.297 in (2.438 cm x 3.294 cm)
- • Weight: 0.10 oz (3g)
- • Antenna options: U.FL, Reverse Polarity SMA (RPSMA), chip antenna or wired whip antenna
- • Operating temperature: -40° C to 85° C (industrial)
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $6+ for Standard Post (typically 6+ business days, tracked)
- $10+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $11+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Guides
The Maker Revolution
Projects
Accurate IoT Clock With ESP8266
Days2Bin: Pico Powered Bin Reminder
Raspberry Pi Video Looper Display Installation | Overshare Video Festival
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments